Is Pine Sol
Pine-Sol
Pine-Sol is a registered trade name of Clorox for a line of household cleaning products, used to clean grease and heavy soil stains. Pine-Sol was based on pine oil when it was created in 1929 and during its rise to national popularity in the 1950s. However, as of 2016, Pine-Sol products sold in st…
Full Answer
Is Pine Sol a good cleaner?
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
Is Pine Sol safe to drink?
Pine-Sol contains ingredients like detergent, pine oil and even some alcohol, which experts say can be dangerous. “If somebody drank a large amount of this pine cleaner then they could pass out. They could go into a coma.
Is Pine Sol septic safe?
Q: Are Pine Sol ® cleaners septic safe? A: Yes! Following the recommended use of any Pine-Sol ® product will not harm your septic system. Q: Is Pine-Sol ® safe to use on hardwood floors or on wood? A: Yes! Pine-Sol ® is safe to use on wood floors, though it is not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn wood.
Does Pine Sol cut grease?
Pine-Sol is a multi-purpose cleaner that you can use to clean every floor type. It contains several chemical ingredients like PEG/PPG Propylheptyl ethers and C10-12 Alcohol Ethoxylates. These chemical elements can cut through grease and let you pick up oily messes from multiple surfaces.
Does Pine-Sol lemon kill germs?
It disinfects and kills 99.9% of germs including Salmonella enterica, Staphlyococcus aureus, and Influenze A virus. You can use Pine-Sol Multi-surface cleaner on hard, nonporous surfaces including floors, sinks, counters, bathtubs, shower stalls, tile and more.
Can you use Pine-Sol as a disinfectant spray?
Pine-Sol, a familiar household cleaner for decades, has recently been approved by the EPA for use as a cleaner/disinfectant against COVID-19 for hard, non-porous surfaces. It's easy to use Pine-Sol as a disinfectant, and it doesn't even need to be diluted.
How do you make Pine-Sol a disinfectant?
Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.
What type of disinfectant is Pine-Sol?
Pine-Sol® Multi-Surface Cleaner is an EPA-registered broad-spectrum disinfectant. It kills household bacteria, including Salmonella choleraesuis and Staphylococcus aureus, on hard, nonporous surfaces when used as directed.
Which is better Pine-Sol or Lysol?
Lysol can be hard to find online and in-stores, but Pine-Sol seems to still be available at most retailers. Compared to Lysol, Pine-Sol has a longer contact time (Lysol's ranges from 2 minutes to 5 minutes) but will still effectively help you to limit your contact with the virus.
How do you mix Pine-Sol in a spray bottle?
Instead, I have found that a spray bottle with a Pine Sol/water mixture is a life saver. I grabbed a few inexpensive spray bottles at the store a while ago, at about $2.00 a bottle. For every 1 cup of warm water, I add 1-2 tbsp Pine Sol. Spray, wipe, move on!
Do you need to dilute Pine-Sol?
Q: Do I need to dilute the Pine-Sol® Squirt 'N Mop or add water? A: No, Pine-Sol® Squirt 'N Mop is a ready-to-use, pre-diluted formula so there is no need to dilute or add water. To use, push out the squirt bottle and use.
How much should I dilute Pine-Sol?
Pine-Sol works differently because you would need at least 1/4 of a cup of the solution to 1 gallon of water, as per Pine-Sol. You can then either pour it into a bucket or a spray bottle. Specifically, this measurement pertains to cleaning countertops, stovetops, laminate flooring, wood flooring, and sinks.
Which is better Pine-Sol or Fabuloso?
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
Can I mix Pine-Sol and bleach?
If you're wondering if you can mix Pine-Sol and bleach, the short answer is no. You shouldn't mix Pine-Sol and bleach because doing so is extremely dangerous. The active ingredient in Pine-Sol is glycolic acid. According to the Department of Health, mixing chlorine bleach with acid produces chlorine gas.
What was Pine-Sol originally used for?
Just after the start of the Great Depression in 1929, chemist Harry A. Cole found himself living in miles of pine forest near Jackson, Mississippi. Mr. Cole long knew that pine oil was a natural disinfectant and deodorizer, so he rolled up his sleeves to create Pine-Sol® Brand Cleaner.
Why is Pine-Sol so strong?
Full strength Pine Sol is made with real pine scent, just like the commercials claim. The fragrance used is pine essential oil. Grease-cutting surfactants and powerful cleaning agents, water, isopropanol (an alcohol solvent with antibacterial properties) and xantham gum round out the ingredient list.
Directions for Use
General Cleaning and Deodorizing: Use ¼ cup per gallon of water. No rinsing required except on rubber or asphalt tile. For tough jobs, use full strength and rinse immediately. For no-wax floors, only use diluted and rinse.*
Love Notes
"It reminds me of home. Mom used it to clean everything. What a wonderful clean smell. Welcome home!"
Value Tip No Special Tools Needed
Pine-Sol ® works with everything from rags, mops and brushes to microfiber cloths and paper towels.
How to Use Pine-Sol as a Disinfectant
WARNING: Do not use Pine-Sol on porous stone surfaces. It could cause damage to the stone.
Step 1
Add Pine-Sol to a clean spray bottle. This step is absolutely optional, but makes using the Pine-Sol much easier when applying to surfaces.
Step 3
Spray Pine-Sol liberally on hard, non-porous surfaces. If you don't want to use a spray bottle, you can apply Pine-Sol directly to surfaces using a sponge or cloth.
How to Use Pine-Sol to Disinfect Laundry
After someone in your home has been sick, it is important to disinfect your laundry, including clothes, towels, and bedding. Pine-Sol can be used to disinfect laundry and kill bacteria. (Also, here's how to disinfect your washing machine after you wash.)
Step 1
Start your washing machine and add one cup of Pine-Sol. If the laundry you are disinfecting can be washed in hot water, then use the hottest setting. For laundry that calls for cold washing, use cold water.
How to Use Pine-Sol to Disinfect Floors
Pine-Sol is most widely known for cleaning floors, and it's a great way to disinfect them, too.
Step 3
Add a mop to the water, then wring out. Do not mop floors with a soaking wet mop. The mop should be damp.
Pine-Sol ingredients
This is a glycol ether, used as an additional solvent. It can cut through oil, grease, soil, etc. This allows the dirt to collect into an easily disposable form.
Is Pine-Sol a disinfectant?
Yes, but only the original Pine-Sol has disinfectant properties. The other scented varieties are designed to clean but not disinfect. The original Pine-Sol kills germs on any surface e.g. toilet seats, tiles, etc.
Is Pine-Sol oil-based or water-based?
Pine-Sol is water-based. Sometimes alcohols like isopropanol are also used as an additional solvent. This is for chemicals that are insoluble in water. Pine oil is only added in the original Pine-Sol variety.
Is Pine-Sol toxic to breathe?
No, Pine-Sol isn’t toxic. It is not poisonous. But it can cause mild irritations. These can include stinging or ache in the nose and throat. It can obstruct breathing as the fumes can block your airway temporarily.
Is Pine-Sol toxic if swallowed?
Yes. Ingesting Pine-Sol can have varying toxicity depending on how much was swallowed. At the lower end, you could experience vomiting, burning sensations, and dizziness.
Is Pine-Sol toxic to babies?
Yes, Pine-Sol can be toxic to babies if ingested or inhaled. The fumes from chemicals like glycol ethers can’t be detected. But if your baby inhales them, it could cause breathing problems and lung irritation.
Is Pine-Sol toxic to cats and dogs?
Pine-Sol could be toxic if your pet ingests it. Pine oil can be very toxic even in the smallest amounts. When ingested, it can cause skin irritations, diarrhea, loss of appetite, and lethargy, etc.
Special offers and product promotions
Amazon Business : Discover discounts and FREE shipping on work supplies. Register a free business account
Product Description
Pine-Sol Multi-Surface Cleaner, Lemon Fresh, is an all purpose cleaner that deodorizes while it cuts through grease, grime and dirt. It’s safe on most surfaces including finished hardwood, ceramic tile, linoleum, stainless steel and more. The 100 ounce bottle of concentrated formula can be diluted for most jobs.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
As a cleaning agent
This is what Pine SOL is primarily known for and unsurprisingly, it is quite good at it. It is pretty versatile as a cleaning agent too. It can clean a wide variety of surfaces and stains. Most applications will require you to use diluted Pine SOL.
As a disinfectant
Pine SOL is a very effective disinfectant and is widely compatible with a wide range of things that might need disinfecting. Almost every use of it as a disinfectant can be accomplished by its diluted form.
As a paint-stripper
This is one application that is not known to many. Pine SOL in its standard form has quite a corrosive effect on the paint. It is, of course, necessary to ensure that the thing from which you are trying to remove paint doesn’t react with Pine SOL. Metallic objects are fine.
As a cat and peat repellent
This is perhaps the most surprising use of Pine SOL. If you have a cat that treats every corner of your house as its litter area then just clean all these places with Pine SOL.
As a laundry cleaner
While detergents are a lot better at cleaning and disinfecting these days, really dirty clothes can be washed and disinfected with Pine SOL. Washers and dryers can also be cleaned and disinfected using Pine SOL.
Is Pine-Sol A Disinfectant?
How to Use Pine-Sol to Disinfect Your Floors
- For general cleaning, you should add ¼ cup of Pine-Sol to a gallon of water to mop nonporous flooring such as sealed hardwoods, ceramic, porcelain, vinyl, linoleum, and laminate. Unfortunately,the standard cleaning method does not thoroughly disinfect your floors.To disinfect your floors, you need to mop with undiluted Pine-Sol, let it sit for ten minutes, and then rinse the …
How to Use Pine-Sol to Disinfect Your Countertops
- Again, to regularly clean countertops, you should dilute your Pine-Sol at ¼ cup to a gallon of water. However, that ratio is not strong enough to kill viruses. For full disinfecting power, you need to wipe down your counters with full-strength Pine-Sol, allow it to sit for ten minutes, and then wipe away with clean water.
Frequently Asked Questions
- Is Pine-Sol Lemon a Disinfectant?
No, the only Pine-Sol cleaner that disinfects is the original formula. But, even then, you must use it at full, undiluted strength to reap the disinfecting benefits. - Is Pine-Sol Lavender a Disinfectant?
No, Pine-Sol lavender is a cleaner and deodorizer, not a disinfectant. The only Pine-Sol product that disinfects is the original formula and only when used at full strength.
Conclusion
- If you need a disinfectant and have some Pine-Sol stored away, you can use it to disinfect all of your non-porous surfaces. Simply use the cleaner at full strength, allow it to sit for ten minutes, and then wipe away with a clean, wet cloth. Pine-Sol is fully approved by the EPA as a disinfectant on most hard surfaces when used correctly.