You do not need to use the Redgard. Millions of showers have been built with out using a waterproofing. However, the information coming down the pike these days is that a surface water-proofer under the tile eliminates the need for a moisture barrier on the studs and it will extend the life of the facility.
Is red guard easy to do?
Does redguard seal shower drywall?
Is Red Guard a waterproofing system?
About this website
Do I need Redgard for shower?
Most of the time, you only need a sealer like this for bathroom drywall, tile backer boards which are often made of drywall. So if you are creating a tile shower then invest in Redgard to ensure you keep your drywall dry.
Do you have to Red Guard cement board?
Once installed, use a liquid waterproofing sealant like Redgard on all cracks, seams and screw holes. I recommend waterproofing all the large flat areas so the shower is completely red. If you apply waterproofing correctly, you won't need the additional membrane under the cement-board.
What is Redgard used for?
A ready-to-use elastomeric waterproofing membrane for both commercial and residential tile and stone application. Suited for interior and exterior substrates, RedGard® creates a continuous waterproof membrane barrier with outstanding adhesion and reduces crack transmission in tile and stone floors.
Is waterproofing required over cement board?
Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.
Do you need a vapor barrier with RedGard?
If you are using a topical waterproofing membrane such as a liquid like redgard or hydroban, or a sheet like kerdi, do not use a moisture or vapor barrier behind your substrate. If you have a vapor or moisture barrier behind your substrate do not use a topical membrane on the front of it.
Can you tile directly on cement board?
Cement board forms a durable, stable base for tile, and it has no organic materials (unlike drywall, greenboard, or plywood) so it is not prone to mold, rot, shrinkage, or decomposition due to moisture. Ceramic tile laid over cement board is one of the most durable floor or wall surfaces you can install.
Can I tile directly over redguard?
You can install thinset mortar and tile directly onto RedGard. For best results, mix mortar in small batches and apply it to the shower wall a small area at a time. Use a notched tile trowel to spread mortar whenever you are tiling over RedGard.
How soon can I tile after applying RedGard?
Depending on ambient conditions, drying time can take up to 12 hours. A water test can be conducted 72 hours after application if required. Clean tools and hands with water before material dries.
Is redguard good for shower walls?
RedGard Creates a Waterproof and Crack Resistant Membrane If you can paint a wall you can use RedGard. And for this shower, we only needed one gallon. There are two ways to get RedGard on cement board panels: Roll it on the wall with a 3/4 inch nap roller.
What happens if you dont waterproof a shower?
Cracking and swelling tiles can happen when flat surfaces aren't properly waterproofed in a shower. These are signs that moisture is getting into the walls.
Do I need to waterproof walls before tiling?
Ensuring your wetroom, bathroom or shower installation is fully waterproof is perhaps the most important part of any tiler's work, because tiles, tile adhesive and tile grout on their own will not inherently protect against water damage.
Is waterproofing necessary?
It is very important to waterproof your home or building from all possible damage. No waterproofing can lead to the development of cracks, paint peel off and even molds, mildew and air contaminants. It is also a great risk for the structure and foundation of the building.
Do you need waterproofing over durock?
Water does not affect USG Durock® Brand Cement Board, however, TCNA guidelines recommend the use of a waterproof membrane in wet areas.
Does Hardie backer board need waterproofing?
Hardie® Backer Cement Board with HydroDefense™ Technology permits time-savings on install by allowing you to skip the step of applying waterproof coating across the entire board surface area. Just waterproof the joints and fasteners and then move on to the next step.
Does Thinset stick to RedGard?
Powdered, unmodified thinset mortar will stick to RedGard waterproofing membrane and securely fuse your tile in place. To make sure your tile installation goes well and remains durable, follow these rules: Allow RedGard to fully dry before you begin tiling.
Do you have to waterproof WonderBoard?
1/2" WonderBoard is unaffected by water but it is not waterproof. If the area behind the backerboard must be kept dry, a moisture barrier or waterproof membrane such as RedGard® Waterproofing and Crack Prevention Membrane must be used.
Redguard mistake on shower pan [Archive] - Ceramic Tile Advice Forums ...
For the shower floor, just spread thinset on the floor with a 1/4x1/4 notch, hard to spread the backs of the tiles. I would tile the floor leaving a grout joint against the drain and then screw the drain down until it is even with the tiles.
Why I can't use thin-set mortar over RedGard...
Hi. I am remodeling my bathroom. I am ready to start tiling tub and shower surrounding walls. Yesterday I applied the RedGard Waterproofing membrane over Durock Cement boards. Then I checked the instructions on the premixed stone, porcelain and ceramic tile thin-set mortar which I am going...
Do I need to use RedGard? | DIY Home Improvement Forum
Hi, I am remodeling my bathroom. I am putting new floor, tub, toilet, walls, etc. My shower base is acrylic pane and tub is Americast. For the floor I am going to use Durock Cement boards, versabond thinset mortar and 6x6 porcelain tile. For tub and shower surrounding walls I am going...
Need For Redgard On Cement Board - Can I apply it before hanging?
Basically I'm getting a guy to do my tile around my tub/shower. He swears you don't need Redgard and we are on a tight timeline so applying it when hung would put us behind anyway (We really have 2 days to do everything).
Hydro Ban vs. RedGard Liquid Membrane: Which One Is Better? - Upgraded Home
Both Hydro Ban and RedGard are liquid-applied waterproofing materials that cure to form a seamless, watertight coating. Though, each product comes with its own unique characteristics, and pros and cons.
How to apply Redgard?
Alternatively, if you opt for a trowel, apply the RedGard using the notched side at a 45-degree angle, so ridges form in the solution. Then, with a second pass, flatten the surface, so it’s completely smooth.
What is redgard used for?
RedGard can be applied to several surfaces, including concrete, cement backer boards, exterior-grade plywood, and even exterior decks. While these tend to be the primary surfaces upon which RedGard is applied, it can also bond directly to metal, PVC, and stainless steel.
What is RedGard Waterproofing?
RedGard Waterproofing is a ready-to-use crack prevention membrane that is ideal for tile and stone applications in commercial and residential settings.
How wide is a crack in Redgard?
All cracks exceeding 1/8 of an inch will need to be repaired before RedGard is applied, as the solution won’t bond cracks that exceed this width.
What is the purpose of redgard on tile?
Importantly, you can do so with the peace of mind that the layer of RedGard underneath the tiles or stones will protect your floor from future damage caused by water or surface movement and will save you a lot of hassle in the future.
How many PSI should I use for RedGard?
If you have an airless sprayer, it should produce between 1900 and 2300 PSI, with a flow rate of 1 to 1.5 gallons per minute. You should apply RedGard evenly so that the desired thickness is achieved.
Is RedGard waterproofing good for flooring?
There’s certainly no harm in applying RedGard Waterproofing to all of your flooring surfaces, as the additional layer of protection provided by the waterproof membrane will undoubtedly increase the durability of your floors.
What is Redguard passionate about?
At RedGuard, we’re passionate about the work we do and we enjoy knowing that our efforts make a real difference in the lives of real people. If you want to be a part of something greater than yourself - and you look good in red - we might be just the place for you.
What is RediSuite blast resistant?
To avoid custom project delays and save weeks in design and production time, RediSuite is the industry’s first standardized, suite-quality blast-resistant buildings. With top tier quality and safety, these pre-engineered modular buildings come in popular multi-functional layouts. Like all of RedGuard’s blast-resistant buildings, RediSuite increases efficiency and saves lives on-site.
How thick should Redgard be?
Protect an entire substrate by covering it with a continuous coat of Redgard at a minimum wet thickness of 30 mils.
What is redgard waterproofing?
Redgard is a liquid waterproofing and crack-prevention material that dries to a flexible membrane. For interior and exterior use, Redgard may be applied to surfaces such as concrete, exterior-grade plywood, decks and gypsum-based materials.
How to get rid of redgard cracks?
Force Redgard into any existing cracks with a flat trowel, roller or brush. Smooth out the ridges of Redgard with a flat trowel to form a smooth, even coat over the cracks.
How long to wait to apply redgard to concrete?
Cure the concrete for at least four weeks prior to Redgard application.
How long does it take for redgard to dry?
Allow Redgard to dry until it is dark red in color, usually one to one and a half hours. Apply a second coat only after the first coat is dry.
Is red guard easy to do?
The other thing is, easy as red guard is for a diyer, it's still not simple. The surface must be clean, it must be rolled to the correct thickness not too thin or too thick, both can cause issues, and in the correct pattern and gaps between boards and changes of plane, from one wall to another or from a wall to a shower pan, must be taped tightly or even with a liquid membrane a crack will open. It's not hard but it's not as simple as it seems watching a YouTube video of someone who does it every day or does demonstrations all the time.
Does redguard seal shower drywall?
Or if your shower has denshield or green board drywall or equivalent that isn’t waterproof, redguard will seal coat it and ready it for tiles
Is Red Guard a waterproofing system?
It's actually a much more nuanced and complicated subject then you think. Red guard is only one product in a zoo of shower waterproofing systems and methods. And they are all different. Each manufacturer has very specific installation guidelines that they contend must be followed for a correct installation. They are very paranoid about this because leaking showers can cause a lot of damage and be very expensive to fix.
