What is the thickness of T 111 siding?
You can find T1-11 siding in sheets that are 48 inches x 96 inches or 48 inches x 120 inches. It comes in thicknesses of 3/8 of an inch, 5/8 of an inch and 3/4 of an inch. What does T1-11 stand for? Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects.
What is T 111 siding made of?
What is T1-11 Siding Made of – Different Types of Wood The types of tree that commonly go into the production of T1-11 include southern yellow pine and Douglas fir, with the first one being a very affordable option. It’s also commonly made with vertical grooves and to increase its strength, the ends are lapped.
How to install T1-11 siding?
How to Install T1-11 Siding
- 1.. Wrap the house with house wrap or 15 mil tarpaper. Staple the material to the studs with a staple gun and cut...
- 2.. Prepare the window openings by installing self-adhering flashing on the bottom edge. If you are using vinyl or...
- 3.. Begin installing the sheets at a lower corner of the wall. Partially drive a screw into the corner stud at...
What is T1 11 plywood siding?
T1-11 is an exterior wood siding product made from plywood, wood composite or oriented strand board, which is a layered board made of compressed wood chips. If treated with chemicals that fight decay and rot, the siding will be noted as a treated wood siding product—an important requirement for outdoor use.
What is better than T111?
Fiber cement siding is considered the best replacement for T1-11 siding because it's so much more durable and longer lasting — without compromising on aesthetics.
Is T1-11 better than plywood?
Plywood is stronger and will hold up in the weather a little better with either type though you'd need to put an excellent all-weather stain or paint to protect it. There are a few finishes, depending on the manufacturer, you will find T1-11 is available in to purchase.
Can T1-11 get wet?
Water damage is the most frequent (and frustrating) problem with T1-11 siding. When the boards get wet, they swell, expand, and eventually flake, corrode, and rot. The edges of T1-11 panels are especially susceptible to water damage and absorb moisture at a rapid pace.
How do I keep my T1-11 from rotting?
High maintenance—T1-11 lasts and keeps looking good only if it is well maintained. It needs to be properly installed, painted, stained, and sealed. It must be meticulously tended and kept sealed so it can protect your home from moisture damage. It needs to be stained every 3-5 years.
Does T1-11 last?
T1-11 siding is a very durable siding material and can last for more than 20 years if it is properly installed, regularly maintained, sealed with quality paint or stain, and protected from water and mold damage.
Do you need Tyvek under T1-11?
What is this? Pro Note: Structures used for human habitation or with an HVAC system should be wrapped with a moisture barrier such as Tyvek prior to installing T1-11 sheathing and siding.
Does T1-11 need to be sealed?
T111 exterior siding is a plywood exterior exhibiting a rough-sawn look with vertical grooves. T111 needs to have proper sealing since water can penetrate and swell, shrink and warp the siding causing rot.
How often should T1-11 siding be painted?
1:023:41How To Paint & Maintain Your T1-11 Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you don't see this used quite as often but there's lots of homes out there that have t-111 sidingMoreSo you don't see this used quite as often but there's lots of homes out there that have t-111 siding. And people still need to maintain that. So one of the things you need to think about in terms of
Can you pressure wash T111?
Preparing T1-11 for repainting requires a different strategy than preparing other wood surfaces because its grainy texture makes it difficult to scrape. While you could remove flaking and peeling paint with a wire brush, most painters opt for power washing, which takes a fraction of the time.
How can I make my T1-11 look good?
Paint It. A fresh coat of paint makes everything look better, and painting T1-11 is less trouble than painting many other types of siding. If it hasn't ever been painted, giving it a coat of primer saves you paint in in the long run by sealing the grain and preventing the top coat from soaking in.
Can I put vinyl siding over T1-11?
T-111 siding is a fine substrate to install vinyl siding over provided it is structurally sound and the manufacturers recommendations are followed. If the T-111 is 5/8 inch thick the vinyl siding can be nailed anywhere on the panels.
What is the best siding for a shed?
11 Most Popular Shed Siding OptionsVinyl Siding. ... Metal / Steel. ... Traditional Wood Siding. ... Engineered Wood Siding. ... LP Smartside Siding. ... Bevel Siding (Clapboard) ... Cedar Shingles. ... Grooved Plywood (T1-11)More items...•
Is T1-11 cheaper than plywood?
Wood sheds used to be made with T1-11 siding, also known as plywood. While T1-11 siding is cheaper, it cannot stand up to the elements of mother nature as well as LP® wood siding and requires yearly maintenance. Even with regular maintenance plywood is extremely susceptible to water damage.
What material is stronger than plywood?
High Density Fiberboard (HDF) But the wood particles are compressed with more force, giving the finished product a harder surface. It's often used by furniture makers and can be molded into wall panels and interior trim. Unfortunately, plywood-size sheets of HDF are only available in thin thicknesses, with 1/8-in.
What is the strongest plywood type?
marine plywoodThe answer is marine plywood. It is the strongest and toughest of all plywood on the market. High-quality glues hold the plies in marine plywood together. That makes them structurally sound and resistant to moisture.
Which is stronger solid wood or plywood?
Solid wood is considered to be stronger compared to plywood since it is a homogeneous material. It also depends on which wood we are talking about. Good quality hardwoods (obtained from deciduous trees such as teak or sheesham) are denser, heavier and stronger compared to softwoods such as pine wood or mango wood.
What is T1-11 siding?
In the pursuit of the answer to the question of what T1-11 siding is, is that it’s an engineered wood siding product that can help add protection to your structure and given its natural characteristics is often used on sheds and barns.
How long has T1-11 been used as siding?
While originally being developed as a temporary solution before intended to be replaced or having siding added on top of it, some homeowners report having left it as their main siding for 30 years.
What Nails Should You Use For T1-11 Siding?
Nails provide an important function of securing the material to whatever surface it is being secured to which is why you need nails that are able to deal with the exterior conditions that you will be exposing it to.
What size nails are needed for T1-11?
For thicker material, the size of the nails is usually 8d, while thinner material will only require smaller nails.
What happens if you don't use nails on T1-11 siding?
Without the use of good fasteners, in this case the nails used for the T1-11 siding, the material is prone to getting lose, allowing air leaks to arise and cause the range of problems that moisture inside the material could be providing to your structure.
What is split log siding?
Split logs – a popular wooden look which can be made from other types of wood as well as fiber cement. Shingles and shakes – Plywood is installed in big panels, not as shingles and shakes. Lap siding – this is a very traditional look in which the different parts overlap.
How much does T1-11 siding cost?
This sheet of T1-11 siding costs $33 per sheet.
Is T1-11 siding good?
T1-11 siding can be a cost-effective siding to use but it also has its downsides. Where and how you choose to apply the siding can make the difference between a positive or negative outcome.
Is T1-11 siding good for a frame house?
Although it doesn't cost as much as other types of siding, T1-11 siding is not a good choice for a frame house. That's because the siding, as mentioned, is not weatherproofed and can become easily harmed from the effects of snow and rain. Therefore, homeowners who use the siding on their house may have to deal with such maintenance issues as mold and structural damage to the walls of the house. Better to choose a siding for your home that is durable and weather resistant.
What is T111 siding?
Essentially, T1-11, often referred to as “T111”, are wood or wood-based siding products that are still available today.
What is the problem with T1-11 siding?
The problem with T1-11 siding, however, is not with its cost, functionality or even the aesthetics. The stigma around T1-11 today is its legacy of water damage. This is not the case nearly as much with the plywood version of T1-11.
Why is OSB siding so permeable?
This is because the production of OSB siding uses a high concentration of natural wooden pieces such as thin wood flakes, cellulose fiber strands and natural resins that make the siding more permeable to moisture. This, in turn, makes it quite vulnerable to moisture and, when exposed to moisture, can be damaged easily.
Why is OSB siding so prone to moisture?
OSB has been shown to have a high moisture absorption rate on its edges after being installed. This is because the production of OSB siding uses a high concentration of natural wooden pieces such as thin wood flakes, cellulose fiber strands and natural resins that make the siding more permeable to moisture. This, in turn, makes it quite vulnerable to moisture and, when exposed to moisture, can be damaged easily.
Can OSB siding damage the interior of a house?
In addition to the exterior damage that results, some homeowners with OSB siding on their homes may also suffer mold and structural damage to the interior walls of the house.
Is OSB siding the same as waferboard siding?
As a result, OSB siding is also referred to as waferboard siding. While this product is a relatively strong, inexpensive and widely used material for home construction, it doesn’t hold up nearly as well as the plywood version. As a result of the manufacturing process, OSB is especially prone to water damage over time.
When was T1-11 siding popular?
Probably the most ubiquitous siding material used in residential construction, T1-11 siding reached its height of popularity in the 1960’s, 70’s and early 80’s. This was time when the trend for a more natural, wood-grained look was all the rage. The siding material of choice for many contractors, especially those building vast swaths ...
How thick is T1-11 siding?
You can find T1-11 siding in sheets that are 48 inches x 96 inches or 48 inches x 120 inches. It comes in thicknesses of 3/8 of an inch, 5/8 of an inch and 3/4 of an inch.
What is the difference between OSB and T1-11 siding?
There are two types of T1-11 siding. Plywood and OSB (oriented strand board). The OSB is the cheaper of the two. The OSB is less expensive because it is wood flakes or strands glued and pressed together and a little lower quality than plywood. Plywood is stronger and will hold up in the weather a little better with either type though you'd need ...
What is the best way to seal siding before installing?
A pre-installation tip is to paint or stain the edges of the siding panels before you install to seal them up and prevent moisture from seeping in from the sides.
Why does plywood siding fail?
Water damage is the primary reason it fails. The plywood siding has less of an issue with water damage than the OSB has. To prevent water damage with any siding it requires proper installation, sealing, and maintenance.
What type of siding is used for stucco?
There are lots of options out there for siding from vinyl siding to stone or brick to stucco and lots of variety and options in between. One of the more common types of siding used residentially is T1-11. It is common due to it's more natural wood grain look that people liked when it was popular.
What happens if OSB T1-11 siding gets wet?
If the OSB T1-11 siding gets wet, it swells and expands, flaking, chipping and eventually will rot.
What is James Hardie siding?
James Hardie Fiber Cement siding is a premium siding choice that will stay beautiful for years and not require as much maintenance.
What is T1-11 Siding?
Sometimes referred to simply as “plywood siding”, T1-11 siding is sold in 3/4” thick 4’x8’ sheets. It comes in a plywood version which is bad and an OSB version which is even worse. They come with a 3/8” lap joint on the sides so that each sheet can be tied into the next sheet and keep water from entering the wall structure.
What is the Problem with T1-11 Siding?
It’s really pretty simple why I’m diametrically opposed to T1-11 siding, it’s called building science. On most structures we use plywood or OSB as sheathing and cover it with building wrap to protect it from the elements.
Real Wood Siding
If you’re going to go with a wood siding, which I would strongly recommend, then stay away from T1-11 siding and choose a solid wood material that is made from rot resistant wood. You have a product that requires far less maintenance and can literally last hundreds of years with a little maintenance.
What is T1-11 Siding?
T1-11 is a type of wood paneling that first appeared in the 1960s. The product continued to get used regularly on homes over the next couple of decades before other materials like steel, aluminum, vinyl, and composite became more popular with builders.
How long does T1-11 siding last?
A well built shed with SmartSide siding can last for decades with minimal, to no damage.
What type of wood siding resists insects the best?
What type of wood siding resists insects the best? Both T1-11 and LP SmartSide are considered very good for keeping away insects like termites. It is especially true if the paneling is properly installed and preventive maintenance like caulking is utilized.
What is LP SmartSide made of?
What materials are used in LP SmartSide? The siding is manufactured with wood strands or wood fiber that has been soaked in a zinc borate compound to help protect it from insects and fungal decay. Resins are added to create strong bonds. Then, a barrier is added to resist flaking and peeling.
What is a tee one eleven?
The siding stands for Texture “tee-one-eleven”. It refers to the textured grooves or channels that are cut into one face of the siding. The siding is available in two major grades: plywood and OSB.
When did Smartside come out?
Louisiana Pacific (LP) siding has been around since the 1980s, though it was not until the late-90s that SmartSide emerged on the market and became a contender for builders.
What is smart guard siding?
The Smart Guard technology of the siding utilizes wood flakes to form the cladding. The flakes are first coated with zinc borate and different waxes in order to withstand water better.
