What is the best chain saw?
Best Overall: Oregon 410-120 120V Bench/Wall Mounted Saw Chain Grinder. Best Electric: Powercare 110-Volt Electric Chainsaw Chain Sharpener. Best Bench-Mounted: Blue Max Bench Mount Electric Chainsaw Sharpener. Best Wall-Mounted: Buffalo Tools ECSS Electric Chainsaw Sharpener.
What is the cheapest chainsaw?
Reviews Of The Best Budget Chainsaw Under 100 And 150 Dollars
- WORX WG303.1 Powered Chain Saw, 16″ Bar Length, Red. ...
- Best Cheap Chainsaw Chainsaw Yet Powerful: Sun Joe SWJ599E 14-inch 9-Amp. ...
- Greenworks 18-Inch 14.5 Amp Corded Electric Chainsaw. ...
- Greenworks 20222 Electric Chainsaw, 14-Inch. ...
- Remington RM1425 Limb N Trim 8 Amp 14-Inch Lightweight Corded Electric Chainsaw. ...
What is the best chainsaw ripping chain?
The sequence of Granberg ripping chain is compromised of two scoring cutters and two clearing cutters. The good folks at Granberg make the best ripping chains on the market and they can make you a custom chain to fit any size chainsaw setup you’re running.
What type of saw chain do you use in chainsaws?
Types of Specialty Chains
- Low Profile Chainsaw Chain. Low profile or “lo pro” chain uses cutters that aren’t as tall as the cutters on standard chainsaw chain.
- Narrow Kerf Chain. Just as low profile chain has shorter cutters than standard chain, narrow kerf chain has narrower cutters than standard chain.
- Ripping Chain. ...
What chainsaw chain has the most teeth?
The Full House chain has the most amount of teeth in its arrangement. It can cut through wood very smoothly. A Full House Chainsaw Chain is common on all guide bars that are up to 24 inches long.
What is the pitch of a chainsaw chain?
The pitch of the chains is the distance between the drive links. As mentioned above, the pitch is an important compatibility component of your chainsaw chain. The pitch of the chain, the pitch of the guide bar and the pitch of the chainsaw drive sprocket need to all match.
Why use square chisel blades?
Square Chisel chainsaw blades are reserved for professionals only. That’s because they require more frequent and accurate filing than any other chain. They get dull quickly but are also the fastest cutting chainsaw chain and most aggressive chainsaw chains out there.
What is a 3/8 chainsaw?
The 3/8″ Mini chainsaw chains are designed for smaller chainsaws. They are used by woodcutters in a high production environment. But you do not use these chains on chain saws with a higher than 45cc engine power.
What happens if you don't use the right chainsaw blade?
It’s important to know which chain saw chain to use for different projects. If you don’t use the right type of chainsaw blade, you run the risk of breaking it. This can not only cost you money but can also be dangerous.
What is chainsaw gauge?
The gauge of a chainsaw chain refers to the thickness of its drive links. Similar to the pitch, the gauge is a compatibility component. The chainsaw chain gauge and the groove in the guide bar must match.
Why does my chain saw fly back?
Kickback is the most common cause of chainsaw-related injury and occurs when the rotating blades stop suddenly when making contact with an object. This causes the saw to fly back toward the operator.
Type Of Cutter
The chain’s “shape” is the cutter kind. It presents the angle of a chain’s cutting blade. There will be four different kinds of shapes. Let’s take a closer look at these designs.
Chain Arrangement
Let’s check out different chain configurations to better understand various kinds of cutting chains. The distance between the teeth on the chains refers to the chain sequence or layout.
Other Measurements
A pitch is a distance between 3 consecutive rivulets on a chain (the studs which keep the chain connected). Measure the gap from the middle of a first rivulet to the middle of a third rivulet and cut it in half to get the pitch.
How many pitches are there in a chainsaw chain?
There are 4 main chain pitches – ¼”, .325”, 3/8” and .404”. Selecting the correct pitch chain ensures your chain meshes properly with the sprocket on the chainsaw, and the chain doesn’t skip on the sprocket. Pitches aren’t interchangeable: if you use a 3/8” saw (by far the most common), you have to use a 3/8” pitch chain.
What to look for when looking at chainsaw chain?
The three key things you need to consider when looking at a chainsaw chain are pitch, gauge, and chain length. Let’s take a look at these in more detail. All are key to understand before you reach for your chainsaw sharpener.
What is the difference between a full chisel and a semi chisel?
Full chisel chains have a very slightly different profile when compared to semi chisel chains . Looking from the front, you can see that the top plate corner has a square edge on a full chisel blade, and a rounded corner on a semi chisel blade.
How to reduce kickback on chainsaw?
This is achieved by adding another link near the depth gauge. As the chain moves around the tip of the saw, this extra raised link attempts to bounce off obstructions rather than ricocheting like a normal chainsaw chain. The result is to decrease kickback.
What is the best chisel blade for wood?
Semi chisel blades are most common, and are the most versatile. These work well in a range of cutting conditions – including hard or soft wood and the presence of dirt. Full chisel chains cut much more efficiently, but they also dull much quicker. Typically, they are best reserved for soft, clean, fresh wood.
What is the gauge of a chainsaw chain?
A chainsaw chain’s gauge describes the width of the drive teeth on the chain. This is determined mainly by the width of the notch in the chainsaw bar. There are 4 common chainsaw chain gauges: .043”, .050”, .058” and .063”.
What is chain pitch?
Chain pitch is used to describe the length between two links in the chain. It is defined as the distance between two drive links, divided by two. A drive link is the link protruding from the inside of the chain. You can tell the inside of the chain because all the protrusions are identical, and shaped like shark’s teeth.
What are the different types of chainsaw chains?
Over the years, new types of chainsaw chains have been designed to make cutting faster and easier or to better suit a specific job. You’ll find three types of specialty chains commonly available: 1 Low profile chain 2 Narrow kerf chain 3 Ripping chain
What is a low profile chainsaw?
Low profile or “lo pro” chain uses cutters that aren’t as tall as the cutters on standard chainsaw chain. This means that low profile chain makes a shallow cut.
What angle does a ripping chain cut?
The cutters on ripping chain cut at a lower angle than those on standard chainsaw chain – 10 degrees versus the standard 30 degrees. Ripping chain also cuts along the wood’s grain instead of against it. As a result, ripping chain removes smaller chunks of wood and is less aggressive, despite what its name suggests.
Why do you dip a chainsaw edge in chrome?
Dipping the cutting edges in chrome helps keep them sharp and resistant to debris. However, cutters with chrome tips are considered standard. Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat.
What determines how well a chain cuts?
It isn’t just the shape of the cutters or the number of cutters on a chain that determines how well the chain cuts. Cutting ability also depends on the material found at the cutters’ edges or tips:
What is more expensive, carbide or diamond chain?
More expensive than carbide chain is diamond-tipped chain. You likely won’t have to worry about paying for this upgrade while working in the woods, though. Diamond chain is made to cut rocks and concrete and should be used only with bars and saws designed for that purpose.
How long is a chainsaw bar?
However, keep in mind that the longest laminated chainsaw bars you’ll find will be 24” long.
Why is it important to replace a chainsaw chain?
When it's time to replace a chain, it is especially important to have all the right information regarding the chainsaw and its chain size.
How to determine chainsaw chain length?
This is because the overall length of chainsaw chains is determined by a combination of pitch (distance between links) and the number of drive links . This is the most accurate way for chain manufacturers ...
What is self sharpening chainsaw?
Self-sharpening chainsaw chains have design features that keep teeth filed as the chain passes around the guide bar. Sharpening is probably the biggest maintenance hassle that chainsaw users face, and is usually best done by a shop. Using a self-sharpening chain can help space those trips to the chainsaw shop further apart.
Why is it important to know the vibration rating of a chainsaw?
This is important because long term use of vibrating tools like chainsaws can cause serious health concerns to the hands (like pain, numbness, burning sensation, etc.)
What is pitch on chainsaw?
Pitch = the distance between any 3 rivets on the chain, divided by half. (see picture below) Yes, that's kind of a complicated measurement, but luckily, most chainsaws display this measurement somewhere on the tool or in the user manual. Chainsaw chains are available in the following pitch sizes, measured in inches:
Why are low kickback chains slower than more aggressive chains?
Because low-kickback chains often limit the amount of material being cut, the cutting goes a little slower than with more aggressive chains, however, low-kickback chains require less power for cutting, because they often have narrow kerfs.
How to narrow the search results to only chains?
To narrow the search results to list only chains whose pitch number match the chain you're looking for, simply click the correct pitch measurement in the "Narrow Listings By:" box. When you do, the page will automatically refresh and display only the chains that match the selected pitch.
What are the components of a Chainsaw chain?
The chain essentially consists of four parts as shown below, although there are two types of cutter – a left hand and right hand cutter (also known as the teeth).
What is the difference between a 3/8 and 0.325 chain saw?
There are several different sizes of pitch, but the most popular sizes found in homeowner saws are 3/8” and 0.325”. So what’s the difference? Well, a larger pitch generally means it is bigger and heavier. In this case it would be the 3/8” pitch and indeed this is the most popular size for professional users as it offers a good compromise between weight, flexibility, strength and cutting speed. Does this mean that it’s superior to a 0.325” model? Absolutely not – many popular saws run this smaller chain. As well as being lighter they can also be considered as ‘high speed’ and are capable of excellent cutting performance.
What are standard, semi-skip and full skip chains?
These terms refer to the number and configuration of the cutting teeth.
What is a low-kickback chain?
Most of the chainsaws sold in the homeowner market today have low-kickback chains. These have been designed to deflect the force of kickback and allow the wood to gradually ride into the cutter. To be designated as low-kickback, it must meet all the requirements of ANSI B175.1-1991, which is the American National Standards Institute’s relevant standard in relation to this product.
What direction do I fit the chain?
This is not usually a particularly difficult task but you need to ensure that the cutting part of the chain is facing the right direction . Unfortunately chains can be fitted both ways and if it is put on backwards, which many new users do, the saw won’t cut.
How tight should the chain be?
During operation chainsaw chains will stretch and could begin to sag on the bar. If it becomes too loose there is a danger that it will come off the bar and become unsafe so it’s important that the correct tension is maintained.
What is the difference between a full skip saw and a standard chainsaw?
The downside is that because they have more teeth, there is more work involved sharpening the chain. Full skip saws are best used on large cuts (such as cutting through a large tree), where a smooth cut is not essential. For bars under 24 inches long, the full complement standard models are recommended.
Why are chainsaws considered heavy duty?
This is especially why regular chains are regarded as “heavy-duty cutters”. They’re chains that are used for crosscutting the wood in a perpendicular manner.
What chain to use for tree cutting?
Regular chains would work best for harsher woodworking, like tree-cutting, where cutting angles are steep, and the wood itself presents a challenge during cutting. If you’re a professional chainsaw use r, it’s a good idea to go for a full-chisel regular chain.
What is a ripping chain?
In a nutshell, ripping chains are made for cutting along the wood. This means it cuts objects parallelly. We recommend ripping chains if you want to cut larger timbers to make boards or planks. You’ll find that ripping chains are popular in milling and other practices that generally require smooth wood surfaces.
What angle do you cut ripping chains?
Ripping chains are only found in a semi-chisel structure. Due to how they’re built, they’re often sharpened at a shallow cutting angle of 10 degrees.
Why do you need to rip a chain?
Ripping chains, on the other hand, will create a cleaner look that makes it more suitable for products that require a smooth texture.
Can ripping chains cut wood?
These shallow angled cutters of ripping chains can cut through wood without the debris wearing out the cutting teeth. This makes them much more resistant to damage than regular chains
Does ripping chain leave a rough cut?
In addition to this, you should be aware that your decision is vital to the quality of your work. A ripping chain will leave a rough cut if you use it for crosscutting, and it’ll take an absurd amount of time.
