Knowledge Builders

should bottom of microwave be flush with cabinets

by Octavia O'Keefe Sr. Published 2 years ago Updated 1 year ago
image

Should the bottom of the microwave be flush with cabinets? The ideally installed microwave should be flush with cabinets. But, if you don’t have deeper than ordinary cabinets, the chances are high that your microwave will stick out of the cabinet.

Should the bottom of the microwave be flush with cabinets? The ideally installed microwave should be flush with cabinets. But, if you don't have deeper than ordinary cabinets, the chances are high that your microwave will stick out of the cabinet.Sep 24, 2021

Full Answer

How far should microwave stick out from cabinet?

The typical recommendation is to have 30 inches from the top of the range to the bottom of the cabinet and at least 13-1/2 inches from the top of the range to the bottom of the microwave.

How many inches should the microwave be from the bottom of the stove?

The National Kitchen and Bath Association recommends that the bottom of the microwave should be no higher than 54 inches above the floor, which would allow for 18 inches of clearance between the microwave and the typical cooktop height of 36 inches. Some manufacturers allow smaller clearances.

Do I need a microwave bump out kit?

Microwaves should be installed in a 12"-13" deep cabinet. In order to install an over-the-range microwave under a deeper cabinet (14",15", or 16") deep cabinet, a Bump Out Kit is required. The Bump Out Kit is a wall bracket that extends the unit forward by 3".

Does an over the range microwave need to be vented?

There is no requirement that your Over The Range (OTR) Microwave be vented to the outdoors. All OTR microwave ovens can be set up to either allow the fan to recirculate the air back into the kitchen or be vented to the outdoors.

Can an over the range microwave be installed under a cabinet?

Do not install within a closed cabinet or a cut-out space where the bottom is covered. These can be installed under a cabinet, even if there is not a cooking surface underneath the appliance. However, the height clearances outlined in the Installation Instructions must still be met.

What size cabinet goes over a microwave?

Widths will all be roughly 30 inches to match the standard width of the range below and the standard cabinet width where the microwave will be mounted. Compact over-the-range microwaves are less common but are usually around 24 inches wide. Heights are usually around 17 inches.

What does a microwave bump out kit do?

The bump-out mounting kit lets you install the microwave under a cabinet deeper than 14 inches but less than 15 inches. Follow the instructions in your installation guide or owner's manual when installing this part. This part works with the following products: Estate, KitchenAid, Roper, Whirlpool.

What is the height of an over-the-range microwave?

According to GE Appliances, an over-the-range microwave height should be a minimum of 66 inches mounting height from the floor to the top of the microwave. This 66-inch difference from the floor allows approximately 13 inches to 16 inches between the cooktop and the bottom front of the microwave.

Microwave-Oven Not Flush with Cabinet...Any advice?

You're not understanding. It can NOT be installed flush mount. It is installed as per specs. Do you see the vents? Those cannot go behind cabinetry. They must be exposed to the air.

Comments (33)

It will not be flush with proper installation. It's installed correctly.

image

Popular Posts:

  • 1. how do you clean windsor windows
  • 2. what does oso mean in japanese
  • 3. what is the role of forecasting in supply chain management
  • 4. how do you run longer on the pacer test
  • 5. what kind of paint do you use on canvas
  • 6. what was the significance of the battle of fort sumter
  • 7. do female woodpeckers have a red head
  • 8. how do you sell and close a deal
  • 9. what are effects of technology
  • 10. do you wear a cumberbund with a white dinner jacket

    • 1.Should bottom of microwave be flush with cabinets?

    Url:https://askinglot.com/should-bottom-of-microwave-be-flush-with-cabinets

    22 hours ago Mar 02, 2020 · Should bottom of microwave be flush with cabinets? Cabinet Depth So, unless you have deeper-than-normal cabinets, chances are that the microwave will stick out from the cabinet somewhat rather than lining up flush with the front. This is normal for most of these microwaves. Click to see full answer.

    Show details

    2.Microwave-Oven Not Flush with Cabinet...Any advice?

    Url:https://www.houzz.com/discussions/3369142/microwave-oven-not-flush-with-cabinet-any-advice

    20 hours ago That will be the distance that the oven is indented back into the cabinet versus the standard install. If you want it totally flush, go back at least 1+3/8 inch. We put it at 1+3/16 inches in, to have a look where the microwave door edge just lines up with the wooden outside frame piece. That is the second picture.

    Show details

    3.Does OTR Microwave need to be flush against upper …

    Url:https://diy.stackexchange.com/questions/171533/does-otr-microwave-need-to-be-flush-against-upper-cabinet

    1 hours ago Should bottom of microwave be flush with cabinets? Cabinet Depth So, unless you have deeper-than-normal cabinets , chances are that the microwave will stick out from the cabinet somewhat rather than lining up flush with the front.

    Show details

    4.What height should a built in microwave be?

    Url:https://blitarkab.go.id/ask/what-height-should-a-built-in-microwave-be

    21 hours ago Aug 18, 2019 · Installing an OTR cabinet and have run into an issue. The upper cabinet has a lip that runs around the whole thing. This will cause the top of the microwave to not be flush against the bottom of the upper cabinet, as the microwave will come in contact with the lip/trim first. There will be about an inch gap.

    Show details
    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9