If you want to mix and match your curtain rods and rings, a good rule of thumb is to choose a drapery ring with an inside diameter that is a half-inch larger than the diameter of the curtain rod. This will ensure effortless movement of your drapery panels. Going larger than that can create a disproportionate look. Drapery Hardware Sets
Full Answer
How can I match a curtain rod with curtains?
If the curtains are just decorative and you don't plan to close them every night, you could spray paint the rod silver to give a lighter look, if you wanted to. See the second pic below. They would look fine. You can use the peel and stick grommet covers so you can match your curtain rod: Peel and Stick Drapery Grommet Covers
Can you use regular rings for curtain brackets?
However, you will only need to use the C rings for the parts of the curtain that need to pass over the bracket. The rest of the rings can be regular rings. There are companies that make regular rings and coordinating C rings. Can you purchase rings and rods from different places? Yes, you can. And what if the finish doesn’t match?
What are the parts of a curtain rod?
This consists of a rod, a straight pipe made of metal and then painted either in a soft black or antique gold, usually. Rings (with hooks) to hold up the draperies or curtains.Let’s now go over each element, very carefully The rods are either 1″, 3/4″ or 5/8″ in diameter. The rods for my clients are custom-made.
Do you know what Curtain hardware you’re using?
But, this is where it is advisable to know what curtain hardware you’re using, before you order your curtains. Once you know that, all you need to do is figure out how high your rod should be and then allow the space for the rod and rings. It’s usually about the overall diameter of the ring.
Do curtain rings need to match Rod?
It depends. If you can see all the windows at the same time, then yes. You might even need the same drapery between rooms if your home is very open concept-like. The more obvious separation there is between rooms, though, the less you need to be concerned with coordinating rods between them.
What should curtain rods match?
Tips for Choosing a Curtain Rod ColorSelect a Curtain Rod Color That Matches Your Window Treatment. The new decade has ushered in a more relaxed, casual style in many homes. ... Make Your Window A Statement Piece. ... Keep it Simple. ... Choose a Curtain Rod Color That Accents Any Metals in the Room.
How much bigger should curtain rings be than the rod?
½ inchChoose a drapery ring with an inside diameter ½ inch larger than the diameter of the pole or rod. For example, if you have a 1-inch diameter rod, the appropriate ring will have an inside diameter of 1 ½ inches. A ring with a smaller inside diameter will make it difficult to move the drapery along the rod.
Can you use curtain rings with any curtains?
You can use curtain clips to hang any type of drapery panel, since you simply clip the ring to the panel. If you want a little bit more length out of your panel, curtain clips are a great way to add 1-2 inches, since the clips means the fabric hangs just below the drapery rod.
Should curtain rods be the same in every room?
While your curtain rods don't need to be the same, they should at least coordinate if they're in adjoining rooms. Or, if the spaces are separate enough to allow for different treatments, you can switch it up.
What color curtains go with gray walls?
30 curtain designs that go with gray wallsClassic white curtains. Using sheer white curtains will really embolden the gray tone of the walls. ... Tan or cream. Another good complement for gray walls would be fellow neutral colors such as cream or tan. ... Yellow. ... Charcoal gray. ... Navy blue. ... Pink/dusty rose. ... Green. ... Purple.More items...
How many rings do I need for curtains?
Calculating Curtain Ring Needs One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
How wide should curtain rings be?
Make sure you select a drapery ring that will fit over the size curtain rod you have. For instance, if your drapery rod is a 1 inch rod, the diameter of the rings should be 1 1/2 inch rings or something larger than 1 inch in diameter.
How do you hang curtains with curtain rings?
0:003:48Hanging Curtains Using Ring Clips (easiest method) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to make the spacing a whole lot easier you put one at the end. Either end and one inMoreYou're going to make the spacing a whole lot easier you put one at the end. Either end and one in the middle. And then you have it so you're always going to get the spacing.
Where should curtain rings be placed?
This time, you do want to use a ruler to make sure your rings are perfectly spaced along the top of the panel. Remember, you want one ring on either side, all the way at the edge. The remaining rings should be spaced evenly in between. Your curtain panel is now technically hemmed and ready for hanging!
How do you hang curtains with round rings?
2:102:34How to Correctly Hang a Drape at Home | Pottery Barn - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf using double or clip rings. Slide these on the rod without the drapes tighten bracket set screwsMoreIf using double or clip rings. Slide these on the rod without the drapes tighten bracket set screws with the included allen wrench to hold the drape rod in place attach finials to the end of each rod.
Can you use curtain rings on rod pocket curtains?
Using curtain clip rings on rod pocket curtains allows for easy opening and closing. You can attach the clips in a manner that enhances how the curtain falls and looks. Keep in mind that attaching curtain rings using clips (or hooks) adds to the length of the curtains. Remove the curtains from the curtain rod.
Why do you need a pin on a drapery?
The pin needs to be placed so that you cannot see the loop when the drapery is hanging.
How many brackets do you need for a ring?
Well, you are going to need not two brackets, not three, but five brackets. But, normal rings won’t be able to go past the two brackets on set several feet away from the end bracket and the middle bracket. Therefore, some of the rings will need to be able to pass by those two brackets.
What is the difference between 3/4" and 5/8" rods?
The 3/4″ rods are hollow and the 5/8″ are solid. Both are very sturdy, but if the rod has an expanse of more than ten feet, it is probably better to do the thicker rod.
How long should drapes be?
It’s usually about the overall diameter of the ring. So, if your rod is at 92″ off of the floor and you’d like a little break, your drapes should be about 91″ long .
How many people do you need to put up drapery hardware?
Actually, putting up drapery hardware is a three-person job– ideally. Although, I know of installers who do it all by themselves, that’s just a recipe for a bad job or else putting lots of holes in the walls.
How many people do you need to measure a ceiling rod?
And even then, put up one bracket and hold the rod up. This is why you need three people. The third person will then deem when the rod looks straight.
Can you call a piece of fabric hanging over a window?
As far as I’m concerned, you can call a piece of fabric hanging over a window anything you like. Someone once chastised me for calling a drapery a drape. Gosh, I’m really sorry to have offended, but really?
