If you have any type of vehicle that sits in storage for months at a time, you should look into using fogging oil if you want to protect the engine. This product offers a way to keep inactive engine components from becoming corroded over time.
What is fogging oil and how does it work?
What is fogging oil? It is an aerosol petroleum treatment for long-term lubrication and corrosion resistance. It is an aerosol petroleum treatment for long-term lubrication and corrosion resistance. When properly administered, it forms a thin film on metal components that, unlike oil, remains intact with time.
What oil should I use for quenching?
- Brine, 5-6 seconds
- Canola oil, 10-11 seconds
- Chevron Quenching oil 70, 10.5 seconds
- Citgo Quenching Oil 0510, 14.5 seconds
- Drasta 119S, 13-16 seconds
- Drasta 117S, 8-12 seconds
- Duratherm G, 11 seconds
- Duratherm Superquench 70, 10 seconds
- Gloc Quench A, 11 seconds
- Gulf Super Quench 70, 11 seconds
How to make fogging machine yourself?
- Deionized water
- Any active ingredient such as glycerin or glycol (in a 6-ounce container)
- An empty water bottle which is equivalent to ¼ of a gallon in size
- Measuring cup
How to stop fogging using shaving cream?
Using shaving cream to defog windows. This hack is as easy as it sounds. All you need to do it simply apply the shaving cream to the inside or outside of your car window and then wipe it off after 10 minutes. That’s it! The cream will leave an invisible layer to keep your windows from fogging up.
Do you need to use fogging oil?
Fogging a boat engine is not completely necessary but is highly recommended. Putting a stabilizer in your gasoline can help reduce the long-term storage issues but is not a guarantee. Essentially, fogging oil is an inexpensive way to better protect your boat engine while it's left idle.
Can fogging oil damage an engine?
This can lead to corrosion on cylinder walls, pistons, rings, and valves. Once the engine is started again, plenty of bad stuff can result: scoring of cylinder walls, wear on the rings, and even a stuck valve.
What is the purpose of fogging oil?
Applied as an aerosol, fogging oil is designed to prevent rust and protect internal engine components during storage or long periods of inactivity. Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses.
Should I Fog my 4 stroke outboard?
Fog the Engine Ideally while the motor is still warm, treat four-stroke and conventional two-stroke engines with fogging oil to prevent corrosion within the engine. Remove the spark plugs and spray the fogging oil directly into each cylinder, following the directions on the can.
Is seafoam fogging oil?
Sea Foam Spray is a blend of cleaning and lubricating petroleum ingredients that can be used SAFELY in all types of 2 and 4 stroke gasoline engines. Especially important for modern GDI engines, it cleans critical upper engine areas where fuel cleaners can't reach.
How do you lubricate an engine that has been sitting?
If you care about the car, and it's been sitting for years, it's strongly advised that, once you verify that the engine rotates, you lubricate the rings and cylinder walls by removing the spark plugs, squirting oil through the plug holes with a Wizard of Oz-style oil can, and gently rotating the engine a few times.
How do you fog a car engine?
0:265:32How and Why You Should Fog Your Engine for Storage - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking some oil typically it's called fogging oil and coating the top end components to make sureMoreTaking some oil typically it's called fogging oil and coating the top end components to make sure that water doesn't get in there and touch those metal parts and cause rust corrosion.
How do you fog a racing engine?
2:066:31Engine Fogging - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the next thing you're gonna do is take your aerosol fogging oil and spray it in all of yourMoreSo the next thing you're gonna do is take your aerosol fogging oil and spray it in all of your exhaust ports pretty liberally and in the spark plug holes. Then want to take a flashlight.
What do you spray in cylinders for storage?
STA- BIL Fogging Oil is an aerosol propelled oil treatment to protect internal engine components during storage. This fogging oil can be sprayed to coat internal engine components and prevent corrosion.
How do you fog a 4 stroke?
0:240:59Maintenance Matters - Fogging - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply run the engine at a fast idle for about 10 to 15 minutes monitoring your temperature gauge toMoreSimply run the engine at a fast idle for about 10 to 15 minutes monitoring your temperature gauge to ensure proper cooling.
How do you fog a 4 stroke outboard?
0:160:59Quick Tip on Fogging Your Outboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fogging process just mix one quart of fogging oil with two gallons of fresh fuel in a portableMoreThe fogging process just mix one quart of fogging oil with two gallons of fresh fuel in a portable fuel tank connect. The tank to your engine. And let the engine run for 10 to 15 minutes.
Where do you spray fogging oil in a carburetor?
5:076:52Fogging The Engine - Fuel & Oil Treatment - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround the piston rings by the valves.MoreAround the piston rings by the valves.
STORAGE AND FOGGING OIL
Gravity wreaks its havoc on stored engines. Oils and lubricants drain away from cylinder walls, piston rings, and other critical engine components. As the ambient temperature and humidity fluctuate, air vapor can condensate within the engine. Corrosion begins in as little as 30 days.
WHAT IS FOGGING OIL?
Enter fogging oil. What is fogging oil? It is an aerosol petroleum treatment for long-term lubrication and corrosion resistance. When properly administered, it forms a thin film on metal components that, unlike oil, remains intact with time.
HOW TO USE FOGGING OIL
Automotive engine fogging is simple. Consider the administration of STA-BIL’s, top-rated fogging oil. The manufacturer recommends a six-step process:
A COMPLETE ENGINE STORAGE ROUTINE
Fogging oils are often used in tandem with fuel stabilizer additives to completely prepare an engine for long-term storage. How to use fogging oil is not difficult. It can be administered by any DIY enthusiast or, if preferred, by an experienced mechanic. Engine storage and fogging oil go hand in hand.
How to fog oil?
Most fogging oil comes in a spray can, and application is pretty simple. Tear down what you need to for access to the throttle body (or bodies), and then spray the contents in while the engine's running. In short order, oily smoke (that would be the fog) should start flowing from the exhaust. Shut the engine down—fogging complete.
What is fogging oil?
Fogging oil wraps the internals in a nice blanket of oily goodness as a preventative measure. Although major wear and broken parts are unlikely over just one winter, fogging oil is cheap insurance for the parts you can't easily see. Fogging Oil. Zach Bowman.
Can you use fogging oil on a diesel engine?
Fogging isn't recommended for all engines, so let's get some warnings and caveats out of the way first. It shouldn't be used on a diesel, as the oil can ignite and cause a runaway condition. It's also not recommended for direct-injection motors, which includes basically anything sold new today.
Who said "fogging" an engine before long term storage?
Zach Bowman. If only all automotive maintenance projects were supposed to end in a cloud of smoke. Though somewhat hard to believe, that's the intention when "fogging" an engine before long-term storage. The Problem: Moisture.
Does Marvel Mystery Oil work?
Some of these bottled products—Marvel Mystery Oil again —also claim to work as a fuel stabilizer, so you can potentially kill two birds with one stone. If you're still unsure, or you have a newer engine with delicate sensors you'd rather not risk, the other option is starting the engine periodically over the winter.
Is it safe to use catalytic converter oil?
Some products are safe for catalytic converters and other emissions equipment, while others aren't; read the label and look for one that explicitly states it to be sure. If the engine is equipped with a mass-airflow sensor, be sure the oil is added downstream of it.
Can you spray oil into a cylinder after a foggy part?
For added protection, you can pull each spark plug and spray another dose of oil into each cylinder after the foggy part. In a modern engine, with its plastic covers and shoehorned packaging, this can range from "minor pain" to "impossible without major disassembly.". Same goes for some older stuff as well.
Why use fogging oil?
If you have any type of vehicle that sits in storage for months at a time, you should look into using fogging oil if you want to protect the engine. This product offers a way to keep inactive engine components from becoming corroded over time.
How to add fogging oil to engine?
The first step is to start the engine. Then take the air filter out and spray fogging oil into the air intake of every cylinder. You should start to see oily smoke—or fog—coming from the exhaust. That’s how you know it’s working.
How to protect engine from corrosion?
If you want a little more protection for the engine, you can also apply fogging oil to the cylinders behind the spark plugs. Just pull out every spark plug so you can spray the fogging oil onto each cylinder. Then put the spark plugs back. Now you can feel confident that your vehicle will be protected against corrosion once you store it, ...
Does fogging oil help a lawn mower?
This means if you have a lawnmower, boat, RV, ATV, or classic car that you plan to store for a few months out of the year, fogging oil will help protect it. The only type of engine that can’t benefit from fogging oil is a diesel, as the oil would likely cause the engine to ignite.
What is fogging oil?
Applied as an aerosol, fogging oil is designed to prevent rust and protect internal engine components during storage or long periods of inactivity.
Does motor oil protect against corrosion?
Motor oil provides some protection. Most two- and four-stroke motor oils are formulated to have an affinity to engine component surfaces, acting as a barrier that keeps condensate from contacting engine components and forming corrosion. However, the effectiveness of motor oil in this area diminishes with time.
What is the advantage of fogging?
The great advantage to fogging as opposed to conventional “spraying & wiping” is that since the particles are in a fine mist or fog, the fog will seep into hard to reach spaces that normally could not be accessed, including crevices, the nooks and crannies.
Why is fogging important?
Fogging is quick, and especially important when there is a need to thoroughly disinfect in high-traffic, or high turnover environments, such as healthcare, offices, etc. Considerable time is saved and manpower usage limited with fogging.
What is the difference between wet fog and dry fog?
Wet-type foggers produce a fine fog similar to a mist, while dry fogging is excellent for areas sensitive to moisture, as in use on electronics (keyboards, etc.). Electrostatic fogging is somewhat similar to wet, albeit the mist/fog is electrically charged right at the tip of the fogger output, which is the opposite charge of surfaces.
Why is fog technology important?
Fogging technology has evolved to become more accessible. It is excellent for decimation of pesticides and disinfectants, as fog will reach hard to access areas , therefore saving time.
What was the first thermal fogger?
The concept came from what was known as pulse-jet technology, as in the early days of jet propulsion technology. This lead to the first handheld thermal fogger, which created dense, spreading clouds of fog. These units were the first thermal foggers based on pulse-jet technology.
Why do you fog your space?
The number one reason would be that it is a very safe, efficient and effective option, especially when it comes to preventing the spread of bacteria and germs.
Is fogging a bad thing?
Years ago, fogging was found to be unsafe. People would get sick after a space was fogged, this was due to the chemicals used. Over the years, advances in biocidal technology have come such a long way that most solutions are organic, non-toxic, and safe for everyone, even pets, kids and plants.
lube spray or fogging oil
Not sure what the difference is, I fog the engine when winterizing, but thats it. I did some searching and read that it is good to fog after each use. The shop manual says to use the spray lube. which should I use? I have fogging oil, is it fine if I use that after every use? if so then what is te lube for...down the cylinders?
Re: lube spray or fogging oil
The Seadoo spray comes out of the tube more like a fog than 3 in 1, which streams out. I prefer the Seadoo brand, as it seems to pass throgh the spark arrester and into the carbs quickly. I also don't feel like I'm hosing it down when I spray directly into the plug holes.
Re: lube spray or fogging oil
The Seadoo spray comes out of the tube more like a fog than 3 in 1, which streams out. I prefer the Seadoo brand, as it seems to pass throgh the spark arrester and into the carbs quickly. I also don't feel like I'm hosing it down when I spray directly into the plug holes.
Re: lube spray or fogging oil
so whats the difference between the sea doo spray lube, and the sea doo storage fogging oil?
Re: lube spray or fogging oil
I use Mercury Marine Storage Seal. It is cheaper and much better than anything Bombardier has.
