Should the return jets in my Pool be aimed up or down?
If your pool is well designed then this should not be a problem you are dealing with. Main drains should draw water from the deep end and return near the surface through the returns jets. There should be no issues with thermoclines in your pool but if there is I do not believe that aiming your returns down is the answer.
Which direction should I point my swimming pool Jets?
This is going to allow for the best water circulation throughout your entire pool. If your skimmer is close to your return, I would also recommend that you point the jets in the opposite direction of your skimmer. Having your jets pointed away from your skimmer will help avoid having water currents obstruct the skimmer reducing its filtration.
Which direction should my return jets point?
A few good reasons why your return jets should point toward the bottom of your swimming pool. By pointing your return jets toward the bottom will allow for the best circulation as the jets will push the water down into the masses of your swimming pool. This allows the surface of your pool to remain calm.
How do swimming pool Jets affect water quality?
If you aim the jets straight, or up toward the surface, the effects on the pool water will be the opposite – more heat loss, evaporation and burn off, and less efficiency in the turnover of the water. The jets will do a lot of the circulation work, but you have to make sure other areas are fully operational as well.
What direction should pool jets face?
Return jets The jets should all point in the same direction, ideally at a 45-degree angle that's directed toward the bottom of the pool. One way to remember it: Point the jets at 4 o'clock or 7 o'clock and ensure that the jets are not pushing water toward the skimmers.
How do you adjust the direction of a pool Jet?
How to Adjust Pool Jets for SkimmersTurn off the pool filter. ... Locate the pool jets in various locations on the inside sides of the pool. ... Grasp the tip of the jet you want to adjust and move it so the tip is pointing toward the nearest skimmer. ... Repeat Step 4 for each additional jet you want to adjust.
How do I aim back my pool jets?
But where should I point them? Most people like to point the jets in a unified direction, clockwise or counterclockwise. On older pools, return jets might have been built on one side or end of the pool with the skimmer opposite the return jets.
Which way should the return jet point in an above ground pool?
It's good practice to point your return jets in a direction that will circulate the water in your pool. If your pool only has one jet, point the jet toward the skimmer and downward. This will circulate the water, and push the water at the bottom of the pool to the surface.
How do I aim the jets in my inground pool?
0:261:54Where Do You Aim Pool Return Jets? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you would aim to do with your return eyeballs is aim them such that you can only just begin toMoreWhat you would aim to do with your return eyeballs is aim them such that you can only just begin to see the surface of the water having just a slight bit of motion. And agitation.
How do I make my pool Jet stronger?
If you want stronger jets, you need to increase flow rate and/or pressure. Assuming that your plumbing can handle higher flow rates, a larger pump would make for stronger jets.
Where do I put the jets in my pool?
The best way to position your pool jets is angled slightly downward and all pointing at the same direction or depending on the shape of your pool, that will create one “flow” or circular motion in your pool. The direction should be away from the skimmers.
Why are my pool jets weak?
The most common reason for weak jets is an air leak. An air leak would come from the suction side of the system. This would be the area between the skimmer and the pump. One way to determine if you have an air leak is by looking for air bubbles coming out of the return jets.
Is a pool pump supposed to be on all the time?
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
How do I increase water circulation in my pool?
Improving Pool CirculationTo ensure proper circulation, you need to switch on the pump for at least 8 hours a day. ... Make sure you size the pump, i.e: get a pump according to your pool volume. ... Just as you clean the pool, you also need to clean the pump and the filtration system. ... Your pool may have a cartridge filter.More items...
How many return jets should an above ground pool have?
Install Enough Of Them For most pools, 2 or 3 return jets will do the job, but for larger pools, you'll have to install more to keep the water fully circulated and the pool properly filtered. Placement of the jets will also be important as you don't want to have them grouped together.
Why are there 2 holes in the bottom of a pool skimmer?
A skimmer is a necessary element of keeping a pool clean. The skimmer sits at the waterline and catches leaves, bugs and trash so they do not clog the filter. Skimmers with a second hole help keep the pump from running dry if the water level is unstable.
What Do Pool Jets Do?
Pool jets are added to a pool to help increase the circulation of water and ensure that the flow of water remains stable throughout the pool. If water doesn’t get proper circulation, it becomes stagnant. Stagnant water may be alright in a bathtub, but in a pool, it becomes a major health hazard.
How Should Pool Jets Be Positioned?
Whether it’s one jet or 50 jets that line your pool, their positioning all should have the same goal in mind. Your jets’ goal is to help circulate the water as much as possible. This means that you should try to position your pool jets as follows:
Related Questions
Though the bubbles might look cute, you really shouldn’t be able to see bubbles coming out of your pool jets. This suggests that your pool pump isn’t pushing water. Rather, it’s forcing air through the system. This may indicate a serious problem with your pump or water levels, such as a leak or a lack of water. Fix this immediately!
How to position pool jets?
The best way to position your pool jets is angled slightly downward and all pointing at the same direction or depending on the shape of your pool, that will create one “flow” or circular motion in your pool. The direction should be away from the skimmers. This will allow the water that isn’t normally getting pulled into the skimmers to be circulated properly (especially the deeper parts of the poo) and be given their chance to be drawn into the pool’s filtration system.
Why do you point your pool jets up?
While it looks terribly fun, pointing your pool jets up to create bubbles for that spa effect, it’s not advisable to do so for extended periods of time! The reason for this is that this causes aeration in the pool, which in turn increases the rate of outgassing in your pool which will raise the pH levels in your pool!
Is there a dead spot in the middle of a pool?
While this may provide some circulation in the far ends of your pool, this will create a bit of a dead spot in the middle of your pool, which isn’t really good as well.
Do pool jets have adjustable jets?
Depending on the pool builder, some pools may have return jets that aren’t adjustable so it might be a good idea to replace them when you have a chance. They’re a really affordable way to improve your pool’s circulation without breaking the bank!
Why do you put jets in the bottom of a pool?
Aiming the jets to the bottom of the pool has a few advantages. There’s less heat loss, less evaporation, and less burn off of the chemicals in the new water. Also , as the water is shot into the deep sections of the pool, there’s more water turnover – meaning it’s helping cycle the pool water more efficiently.
Why is it important to place jets in a pool?
Placement of the jets will also be important as you don’t want to have them grouped together. This will lead to inefficient water circulation, and that will be the quick est way to start having problems with your pool water.
What size eyeballs should I use for a pool skimmer?
Eyeballs sizes you’ll find are ⅜”, ½”, and ¾”.
Why are return jets called return jets?
They’re called return jets because of how the chain of circulation works in a pool. Dirty water gets sucked out of the pool via the skimmers and main drains, it then goes through the pool filter system, before being “returned” to the swimming pool by the jets. Most pools will use a minimum of 2 or 3 return jets, and install them in the deep end, ...
How many return jets are needed for a pool?
Most pools will use a minimum of 2 or 3 return jets, and install them in the deep end, shallow end, and any other area of the pool that provides balanced circulation to the water. Additionally, if the pool is designed with a swim out, step jets are usually installed on either side, to keep the water circulating around them.
What chemical is used to make pool water?
They Distribute Your Pool Chemicals. Chlorine isn’t the only chemical that makes up balanced pool water, and for the most part, you’ll be forever adding things to the water to keep it from going haywire. Conversely, if the water has already gone sideways, you’ll have to add things to it to bring it back into harmony.
How to make sure your jets are working?
The easiest way to make sure your jets are fully operational is to place your hand over them and feel how much water is being injected into the pool. If the stream feels weak, there is probably an issue somewhere in the filtration chain that needs to be fixed. An air leak can affect the return jet pressure.
