The agitator dogs are what prevents the agitator from rotating in both directions. These are small plastic parts that will break when significant force is applied. They can wear over time or break when the machine is overloaded.
What are agitator dogs on washer?
What Are Agitator Dogs. Agitator dogs, which are also known as dog ears, ratchet cogs, or agitator cogs control what direction the top section of a dual action agitator moves in. Basically, the upper part of your washer’s agitator should only move in a single direction, while the lower portion has the ability to rotate in multiple directions.
What does the agitator repair kit do?
This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your washer to tumble your clothes during the washer cycle. Your agitator will rotate one way, and not the other.
What are agitator dogs and why do they fail?
Like any part of an appliance, the agitator can malfunction. Often, the main culprit of a failing agitator is caused by worn agitator dogs. If you’ve never heard of agitator dogs, don’t worry, we’re here to help you better understand their function and how to replace them.
Will the agitator dogs 80040 work with my appliance?
Answer Ed, the agitator dogs 80040 will work with the model provided. Was this helpful? Check your model number or use our Cross Reference Tool to determine if this part will work with your appliance.
How do you fix a dog's agitator?
0:451:41How to Replace the Agitator Dogs on a Whirlpool Vertical ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the dust cap out of the agitator. Use a 7/16 socket with an extension to remove the agitatorMorePull the dust cap out of the agitator. Use a 7/16 socket with an extension to remove the agitator bolt. Pull the top auger off of the agitator assembly. And set it on a work surface dump.
Where do agitator dogs go?
0:159:45How to Repair Agitator Dogs On A Whirlpool Washing Machine.YouTubeStart of suggested clipEnd of suggested clipDirection. These are supposed to grab on inside here and make it turn forward. Now normally when IMoreDirection. These are supposed to grab on inside here and make it turn forward. Now normally when I turn it counterclockwise. It should grab onto. The lower educator.
How much does it cost to replace agitator dogs?
The highest cost to repair a washer could be upwards of $575 for labor and parts for an agitator replacement....Other Common Washing Machine Repairs.PartAverage Repair Costs (Labor Included)Spider$275 - $400Motor$300 - $500Agitator$350 - $5753 more rows•Jan 4, 2022
What are washing machine dogs?
Dog ears in a washing machine agitator are also called dogs, cogs or agitator directional cogs. Dogs catch on a cam inside the agitator, which creates the stop-and-go movement of the agitator during the wash cycle. Typically made of nylon or a similar material, dogs eventually wear out and require replacement.
How do I remove my agitator?
0:392:50How to Clean, Remove and Replace the Agitator in your Washing MachineYouTubeStart of suggested clipEnd of suggested clipAnd then write down the center of the agitator as a little wound yard remove that just hold theMoreAnd then write down the center of the agitator as a little wound yard remove that just hold the agitator as you unscrew anticlockwise.
How do you know if the agitator is working?
The agitator should start to oscillate back and forth, mixing up the clothes in the water. If the agitator does not move, double check that the sensor is depressed. If it still does not move with the sensor depressed, the agitator is broken and should be repaired.
How long should a washing machine last?
around 10 yearsWashing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it's been having some problems, here are some signs the end may be near.
Is it cheaper to repair or replace a washing machine?
Repair Costs Are Significant As a general rule, if an appliance repair will cost more than 50 percent of the price of a replacement, it might be prudent to buy a newer model if your budget allows for it.
How long should a washer last?
10 to 13 yearsWashing Machine Lifespan The average life of a washing machine ranges from 10 to 13 years, although some brands can manufacture washing machines with an even longer lifespan than the average appliance.
What's the difference between agitator and impeller?
impellers? Washing machines with agitators use a central post that twists back and forth, rubbing against clothes to help break apart stains. In contrast, washing machines with impellers use a low-profile cone or disc that spins/rotates to rub clothes against each other to get them clean.
Why is my washer making a grinding noise when agitating?
The rotating motion of the agitator is permitted by a component called agitator dogs. You can find these in the top part of the agitator in the center column. After frequent use, it's common for agitator dogs to wear out and start slipping. As a result, you will hear a grinding noise during washing machine agitation.
How much should an agitator move?
Check if the belt is loose by gently pushing it—it should only move about ½ inch. If the belt moves more than ½ inch, you or a repair pro will need to tighten the mounting nut to return the proper tension.
Can you put a dog in a washing machine?
Wash the dog bedding in your washing machine as directed by the label, using the highest recommended temperature setting or at least 140 degrees Fahrenheit. Test the fabric for color fastness by applying the detergent on an inside seam or inconspicuous area on the bottom.
Is it OK to wash dog blanket in washing machine?
Washing Instructions Give the blanket a good shake to remove any lingering hairs. Add ½ cup of white vinegar to the wash cycle to help loosen pet hair. Run an empty wash cycle after washing the blanket to filter out fur and hair. Wipe down the washer tub after the empty cycle.
What is an agitator dog?
The agitator dog is an essential part of the washer's clutch and works to engage the agitator. New agitator dogs may be needed if the top agitator is no longer moving or if the machine is making a grinding noise. Faulty agitator dogs could also cause intermittent ...
Does the 80040 agitator dog work?
Answer Ed, the agitator dogs 80040 will work with the model provided.
Does an agitator work for a specific unit?
Answer Diana, There are different size agitators out there but the only agitator that will work for any specific unit is the one that the manufacturer has recommended for it.
Can a Whirlpool agitator dog break?
Faulty agitator dogs could also cause intermittent leaking. Sometimes the agitator dogs will break after years of use. To replace these parts, the user will need to use a screwdriver to take apart the agitator assembly itself.This part is a genuine Whirlpool part and is an OEM part sourced directly from the manufacturer, and it is sold individually.
What is an agitator dog?
Agitator dogs, which are also known as dog ears, ratchet cogs, or agitator cogs control what direction the top section of a dual action agitator moves in. Basically, the upper part of your washer’s agitator should only move in a single direction, while the lower portion has the ability to rotate in multiple directions.
Why is my agitator dog not working?
Symptoms The Agitator Dogs Are Failing. As we said earlier, a malfunctioning agitator is often caused by worn agitator dogs. Usually, the failure is simply due to normal wear and tear or old age, but overloading your washing machine on a regular basis can also speed up the deterioration of the part. The top section of your agitator should only spin ...
How to tell if agitator is working?
Taking the agitator apart is the only way to tell if this is truly the problem. The upper half of your machine’s agitator pulls the clothing to the bottom of your appliance tub. If the agitator is not working properly, due to failing agitator dogs, your clothes will remain at the top of the tub. Safety Warning: As with any washer repair, safety ...
How to remove agitator dogs from holder?
To do this, simply pull the two sections apart. Once the top and bottom sections are disconnected, turn the top half upside down. The cam, which holds the agitator dogs will fall out. Take off the plastic bearing that rests on top of the agitator dogs. Remove the agitator dogs from their holder and replace them with new ones.
Can you spin an agitator in both directions?
The top section of your agitator should only spin in one direction. If you are able to manually spin it in both directions, the agitator dogs are no longer functioning properly and will need to be replaced.
What is the one way ratcheting motion of an agitator dog?
That one-way motion combines with the back-and-forth motion at the bottom of the agitator to move garments through the water during the agitate cycle.
How to remove agitator spring retainer?
Tip: If your agitator has a plastic spring retainer above the agitator bolt with a 1/2" square hole at the top, use a 1/2" ratchet drive extension and ratchet to remove the spring retainer.
How to remove agitator cap on washing machine?
Remove the washing machine agitator cap by prying up around the outer edge with a small flat-blade screwdriver. Then unscrew the center hold-down (Photo 1). Reach in and remove the ratchet assembly. Turn it upside down and remove the snap-in retaining plate (Photo 2). Then install the new agitator dogs and retaining plate (Photo 3). Then reinstall the ratcheting assembly, tighten and pop on the lid.
What happens if your Whirlpool washer stops agitating?
If your Whirlpool washer stops agitating, the racheting pawls may be worn out or broken. The fix is inexpensive and easy, even for a beginner.
Does Whirlpool have a dog agitator?
The ratcheting pawls (called “dogs”) can wear out with age, or break if you overload the machine. When that happens, the washing machine agitator dogs won’t rotate . The parts are cheap (less than $5 at appliance repair stores) and the repair is easy. Whirlpool used two ratchet designs, depending on whether the washer has a plain agitator or one equipped with a fabric softener dispenser. Replacing the agitator dogs in a plain agitator is more complicated and that’s the one we show here.
What is the agitator in a washer?
The agitator is what creates the thrusting motion in your washer to tumble your clothes during the washer cycle. Your agitator will rotate one way, and not the other. The agitator dogs are what prevent the agitator from rotating in both directions, while allowing it to rotate in one direction.
What is an agitator repair kit?
This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.
How many bolts does a washer agitator have?
One bolt held the entire agitator unit in the washer, as well as held the upper and lower halves together. Once that nut was removed the two halves seperated and the plastic clutch pieces could easily be replaced wtih the new onces in the repair kit.
What happens if your agitator is not working?
If your agitator is no longer agitating properly, your clothes will not tumble, and will not be washed properly. The agitator repair kit includes an agitator cam, 4 directional cogs, a bearing, thrust spacer, inner cap seal, and a washer. It is constructed of plastic and rubber, and comes in black/white. See more...
How to remove plastic cup from agitator?
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
/GettyImages-559445627-56ffe1443df78c7d9e5b86d7.jpg)