What are Bessler stairs made of?
Ladder rods under each tread for added strength and rigidity. Bessler stairs are made with kiln dried yellow pine, full length handrails and grade A 1 3/8″ hollow core doors on most models. Sliding stairs are fully counterbalanced for weight control to respond to the lightest touch.
Can you walk up Bessler stairs?
With angles as small as 53 degrees, you don’t climb a Bessler, you walk up it. For residential or commercial use (Space Saver is for residential use only). Bessler stairs are available in eight models, including a folding space saver model.
What is the size of the Bessler be series fire rated stairs?
Brochure – Bessler BE Series Fire Rated Size: (434.84 KB) Instructions – Bessler BE Series Fire Rated Size: (1.86 MB) Faq Bessler BE-119 Series One Hour Fire Rated Wood Attic Stairs - 350 lb Capacity Specifications
Where are Bessler stairways ladders made?
High end folding attic ladders manufactured by both Bessler Stairways and American Stairways. All of these attic ladders are made in the USA.
What are pull down attic stairs called?
An attic ladder is a retractable stairway that pulls down from the ceiling to provide access to attic space, then folds up into a ceiling frame out of the way when it is not needed.
What are disappearing stairs?
Disappearing stairs are any configuration for stairs that can be used to move from one floor to another, but is not fixed in place permanently. Some designs for these types of stairs call for retracting sections that fold and can be recessed in the floor between the two levels.
How do you make attic stairs safer?
0:231:51Make Your Attic Stairs Safer! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can move around your attic storage space with ease and peace of mind because versa rail providesMoreYou can move around your attic storage space with ease and peace of mind because versa rail provides a safety guard rail around three sides of the ladder opening.
How do you make attic stairs?
0:1217:23How to Install Attic Stairs | Mitre 10 Easy As DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSpace or you've got an existing attic that's difficult to access then a set of pull-down atticMoreSpace or you've got an existing attic that's difficult to access then a set of pull-down attic stairs are the perfect way for you to safely get into your roof.
How much weight can attic stairs support?
Heights can range from around 8 to 16 feet, and weight load capacity is usually about 200 to 300 pounds, with some heavier-duty ladders holding up to 375 pounds.
How long do attic stairs last?
You can expect a pull-down attic ladder to last 30 to 60 years, with an average of 40 years. Factors that will shorten the lifespan include heavy usage, excessive weight on steps, and homeowner modifications. Regular inspections and tightening of loose nuts, especially at hinged sections, is also important.
Are attic stairs safe?
Attic ladders are safe and reliable to use provided it is assembled and installed correctly. Most injuries from attic ladders occur from incorrect installation or broken ladder components on old attic ladders.
How much are pull down attic stairs?
Cost to Install Attic Ladder or Stairs The average cost of installing attic ladders or stairs ranges from $220 to $647, with an average rate of $445 including parts and labor. Labor charges for a professional contractor average $240 per project, with an hourly rate of $60.
Are attic ladders easy to install?
For most homeowners, aluminum attic ladders are the easiest to install. They're durable and lightweight, which makes them easier to fit properly. Here are a few tips for choosing the right ladder: Look for the right length.
What size are attic stairs?
Standard openings are 22.5” x 54”, but some homes have wider openings. Conversely, some homes have smaller openings (or hatches). It's important to understand the opening size you have or will create to ensure you select the correct attic ladder product for your home.
About Bessler Stairways
The Bessler sliding attic stairway is the first of its kind, developed in 1909! Over the years builders and contractors have been installing the Bessler Stairway for the discriminating homeowner.
One-piece design & counterbalanced!
With Bessler’s one-piece design and counterbalanced assembly, opening and closing the Bessler is smooth and easy. The stairway glides into position almost effortlessly. With ratings up to 800 lbs., and a range of ceiling heights & opening widths, most residential or commercial applications can be accommodated.
You don't climb a Bessler Stairway - you walk up it!
For more information about Bessler Attic Stairways, kindly phone us at (914) 248-6100 – or if after hours, please complete our simple form which you can find here.
