Buses must never carry:
- Division 2.3 POISONOUS (Toxic) GAS.
- Division 6.1 EXTREMELY DANGEROUS POISONOUS (Toxic) LIQUID.
- Paranitroaniline.
- More than 45 kg (100 pounds) of a solid Division 6.1 Poison.
- More than 225 kg (500 pounds) total of allowable hazardous materials and no more than 45 kg (100 pounds) of any one class.
Can hazardous materials be carried on a bus?
Most hazardous materials cannot be carried on a bus. The Federal Hazardous Materials Table shows which materials are hazardous. They pose a risk to health, safety, and property during transportation. The rules require shippers to mark containers of hazardous material with the material's name, identification number, and hazard label.
What can you carry on a medical transportation bus?
Buses may carry small-arms ammunition labeled ORM-D, emergency hospital supplies, and drugs. You can carry small amounts of some other hazardous materials if the shipper cannot send them any other way. 3.
How does the Department of Transportation regulate transportation of hazardous materials?
The Secretary of the Department of Transportation receives the authority to regulate the transportation of hazardous materials from the Hazardous Materials Transportation Act (HMTA), as amended and codified in 49 U.S.C. 5101 et seq. The Secretary is authorized to issue regulations to implement the requirements of 49 U.S.C.
What should I look for when traveling with hazardous materials?
4.2.1 – Hazardous Materials Watch for cargo or baggage containing hazardous materials. Most hazardous materials cannot be carried on a bus. The Federal Hazardous Materials Table shows which materials are hazardous. They pose a risk to health, safety, and property during transportation.
What are the safety requirements for a bus?
What can a bus carry?
What is the line on a bus called?
What to check in the interior of a bus?
Can you discharge a rider?
See 2 more
About this website
What is the only hazardous material allowed to be transported in the passenger compartment?
No Class 1 (explosive) material, except small-arms ammunition, may be carried in the passenger-carrying space of any motor vehicle transporting passengers for hire.
Which of the following types of emergency equipment must you have on your bus?
Passenger EndorsmentQuestionAnswerWhich of the following lists the tree types of emergency equipment that you must have on your bus:Fire extinguisher, spare electric fuse(unless equipped with circuit breakers),reflectorsBus may carry baggage or freight only if it is:Secured and out of the way of any exit41 more rows
Can a passenger carry a car battery onto a bus?
Hazardous Materials Riders sometimes board a bus with an unlabeled hazardous material. They may not know it is unsafe. Do not allow riders to carry on common hazards such as car batteries or gasoline. The Federal Hazardous Materials Table shows which materials are hazardous.
Does it matter where you make a disruptive passenger get off the bus?
Does it matter where you make a disruptive passenger get off the bus? Yes it matters, so it may be safer at the next scheduled stop or a well-lighted area where there are other people.
When carrying permissible hazardous materials a bus must not carry more than what weight of any one class of material?
The gross weight of any given class of hazardous material other than Class 1 (explosive) materials shall not exceed 45 kg (99 pounds), and the aggregate weight of all such other dangerous articles shall not exceed 225 kg (496 pounds).
What is the most important piece of safety equipment on a bus?
Eye Protection This is probably single-handedly the most important piece of safety equipment and the most essential.
What type of batteries are considered to be hazardous material?
Lithium batteries are regulated as a hazardous material under the U.S. Department of Transportation's (DOT) Hazardous Materials Regulations (HMR; 49 C.F.R., Parts 171-180).
What items have lithium batteries?
Lithium-Ion batteries are rechargeable and are used in vaping devices, many personal electronics such as cell phones, tablets, and laptops, E-Bikes, electric toothbrushes, tools, hoverboards, scooters, and for solar power backup storage.
Are car batteries considered hazardous material?
It's safest to say that like all batteries, lithium-ion batteries are hazardous and therefore cannot be disposed of in the regular garbage disposal.
How far does the danger zone extend around the bus minimum?
The danger zones are any area outside of the bus that extend as much as 15 feet from the front bumper, 15 feet from the left and right sides of the bus and 15 feet behind the rear bumper of the school bus. These areas are where children are in the most danger of being hit, either by another vehicle or their own bus.
When the bus is in motion where are riders prohibited from standing forward of?
No rider may stand forward of the rear of the driver's seat. Buses designed to allow standing must have a 2-inch line on the floor or some other means of showing riders where they cannot stand. This is called the standee line.
What four things related to cargo are drivers responsible for?
Whether or not you load and secure the cargo yourself, you are responsible for:Inspecting your cargo.Recognizing overloads and poorly balanced weight.Knowing your cargo is properly secured and does not obscure your view ahead or to the sides.Knowing your cargo does not restrict your access to emergency equipment.
How do you transport a battery?
Regulations prohibit storing and transporting smaller battery packs in a metal box. If there is a danger of an electrical short, wrap each battery individually in a plastic bag. Do not mix batteries with coins and house keys in your pocket.
How do you carry a car battery?
Follow these steps to safely carry a car battery:First, put it in a plastic bag. ... Next, cover the terminals with non-conductive tape.Place the taped and bagged batter in a box so that it doesn't move around too much when you transport it.From there, you can move your battery freely!
How do you transport an inverter battery?
The batteries must be placed upright. Place a non-conductive divider to separate each battery. Place terminal protection on the batteries. The batteries must be subjected to pressure differential and vibration testing.
How do you ship a car battery?
Protect terminals by completely covering them with an insulating, non-conductive material (e.g., using electrical tape or enclosing each battery separately in a plastic bag), or packing each battery in fully enclosed inner packaging to ensure exposed terminals are protected.
CDL General Knowledge Practice Test #12 | Trucker Country
This is CDL General Knowledge Test 12 in our original Classic Mode. Simply click in your answer to each CDL practice test question. When you're finished, check your score and results.
CDL Permit Test Sections 2.17, 2.18, and 2.19 Flashcards - Quizlet
Driving Emergencies Anti-lock Braking Systems (ABS) Skid Control and Recovery Learn with flashcards, games, and more — for free.
Section 4 Passenger Transport Flashcards | Quizlet
Study with Quizlet and memorize flashcards containing terms like Name some things to check in the interior of a bus during a Vehicle inspection., What are some hazardous materials you can transport by bus?, What are some hazardous materials you can't transport by bus? and more.
What are the safety requirements for a bus?
Make sure these things are in good working order before driving: Service brakes, including air hose couplings (if your bus has a trailer or semitrailer). Parking brake. Steering mechanism. Lights and reflectors. Tires (front wheels must not have recapped or regrooved tires ). Horn. Windshield wiper or wipers. Rear-vision mirror or mirrors. Coupling devices (if present). Wheels and rims. Emergency equipment. Access Doors and Panels Close any open emergency exits. Also, close any open access panels (for baggage, restroom service, engine, etc.) before driving. Always check the interior of the bus before driving to ensure rider safety. Aisles and stairwells should always be clear. The following parts of your bus must be in safe working condition: Each handhold and railing. Floor covering. Signaling devices, including the restroom emergency buzzer, if the bus has a restroom. Emergency exit handles. The seats must be safe for riders. All seats must be securely fastened to the bus. Never drive with an open emergency exit door or window. The "Emergency Exit" sign on an emergency door must be clearly visible. If there is a red emergency door light, it must work. Turn it on at night or any other time you use your outside lights. Roof Hatches You may lock some emergency roof hatches in a partly open position for fresh air. Do not leave them open as a regular practice. Keep in mind the bus's higher clearance while driving with them open. Make sure your bus has the fire extinguisher and emergency reflectors required by law. The bus must also have spare electrical fuses, unless equipped with circuit breakers.
What can a bus carry?
Buses may carry small-arms ammunition labeled ORM-D, emergency hospital supplies, and drugs. You can carry small amounts of some other hazardous materials if the shipper cannot send them any other way.
What is the line on a bus called?
This is called the standee line. All standing riders must stay behind it.
What to check in the interior of a bus?
1. Name some things to check in the interior of a bus during a pre-trip inspection. Make sure these things are in good working order before driving: Service brakes, including air hose couplings (if your bus has a trailer or semitrailer). Parking brake. Steering mechanism.
Can you discharge a rider?
Don't discharge such riders where it would be unsafe for them. It may be safer at the next scheduled stop or a well-lighted area where there are other people.
Why do transporters clean up hazardous waste?
A transporter must clean up a hazardous waste discharge so that the hazardous waste discharge no longer presents a hazard to human health or the environment.
Who are the Regulated Hazardous Waste Transporters?
Subtitle C of the Resource Conservation and Recovery Act (RCRA) defines a hazardous waste transporter as any person engaged in the off-site transportation of the hazardous waste within the United States. Off-site transportation of hazardous waste includes shipments from a hazardous waste generator’s facility or property to another facility for treatment, storage, or disposal (TSDF).
How long can hazardous waste be stored without a permit?
A hazardous waste transporter may hold waste without a storage permit in containers at a transfer facility for 10 days or less as long as the waste is manifested and kept in U.S. DOT specification containers. Storage in stationary containers is prohibited unless the transfer facility has a RCRA permit or interim status.
What is the exemption from manifest requirements for SQGs?
This exemption is intended to facilitate the recycling of small quantities of hazardous wastes that are transported in a protective manner.
How long can hazardous waste be stored?
A hazardous waste transporter may hold waste without a storage permit in containers at a transfer facility for 10 days or less as long as the waste is manifested and kept in U.S. DOT specification containers. Storage in stationary containers is prohibited unless the transfer facility has a RCRA permit or interim status.
What is the EPA hazardous waste manifest system?
EPA’s hazardous waste manifest system is designed to track hazardous waste from the time it leaves the generator facility where it was produced, until it reaches the off-site waste management facility that will store, treat or dispose of the hazardous waste. The manifesting responsibilities vary depending on the mode of transportation (highway, water, rail or air).
Why is a manifest needed for hazardous waste?
Because hazardous waste is also regulated by the DOT under its hazardous materials laws, the Manifest was developed to meet both EPA’s requirements for a manifest, and DOT’s requirements for "shipping papers.".
What to check in the interior of a bus?
Name some things to check in the interior of a bus during the pre-trip inspection. Parking brake and steering mechanism. Lights, reflectors, and horn. Tires and windshield wipers. All of the above. 2. As you check the outside of the bus, you should close any open emergency exits or open access panels. True.
How far before the draw of the bridge should you stop?
Stop at least 40 feet before the draw of the bridge.
Can hazardous materials be carried on a bus?
6. Most hazardous materials cannot be carried on a bus, but some hazardous materials are allowed.
Do you have to complete a written inspection report for each bus driver?
15. If you work as an interstate carrier, you must complete a written inspection report for each bus driver.
Can you push a disabled bus?
Don’t tow or push a disabled bus with riders aboard.
Can you use recapped tires on a bus?
No , recapped or regrooved tires are not allowed on buses.
What are the regulations for transporting hazardous materials?
They tell shippers how to package the materials safely and drivers how to load, transport, and unload the material. These are called "containment rules."
What is the responsibility of shippers to communicate the risk of a hazard?
To communicate the risk, shippers must warn drivers and others about the material's hazards. The regulations require shippers to put hazard warning labels on packages, provide proper shipping papers, emergency response information, and placards.#N#These steps communicate the hazard to the shipper, the carrier, and the driver.
How to get a hazardous materials endorsement?
Assure Safe Drivers and Equipment. In order to get a hazardous materials endorsement on a CDL, you must pass a written test about transporting hazardous materials. To pass the test, you must know how to: Identify what are hazardous materials. Safely load shipments.
Where to find hazardous materials identification number?
Identification numbers are in column 4 of the Hazardous Materials Table. The rules require black 100 mm (3.9 inch) numbers on orange panels, placards, or a white, diamond-shaped background if no placards are required. Specification cargo tanks must show re-test date markings.
What is shipping paper?
A shipping paper describes the hazardous materials being transported. Shipping orders, bills of lading, and manifests are all shipping papers. Figure 9-6 shows an example shipping paper.
How long do you have to keep a record of hazardous materials training?
Hazardous materials employers are required to keep a record of that training on each employee as long as that employee is working with hazardous materials, and for 90 days thereafter.
How big are cargo placards?
Placards must be readable from all four directions. They are 10 3/4 inches square, square-on-point, in a diamond shape. Cargo tanks and other bulk packaging display the identification number of their contents on placards or orange panels or white square-on-point displays that are the same size as placards.
Why should hazardous materials packages be secured in a transport vehicle?
Hazardous materials packages should be secured in a transport vehicle to prevent damage during transportation. The motor carrier is responsible for blocking and bracing HM for shipment by highway. Therefore a carrier who removes and or alters blocking and bracing material installed by the shipper is not necessarily in violation of federal law. If the hazardous materials leaks or spills during transport due to insufficient blocking and bracing, the motor carrier is at fault.
Who regulates hazardous materials?
The Secretary of the Department of Transportation receives the authority to regulate the transportation of hazardous materials from the Hazardous Materials Transportation Act (HMTA), as amended and codified in 49 U.S.C. 5101 et seq. The Secretary is authorized to issue regulations to implement the requirements of 49 U.S.C. The Pipeline and Hazardous Materials Safety Administration (PHMSA) (formerly the Research and Special Provisions Administration (RSPA)) was delegated the responsibility to write the hazardous materials regulations, which are contained in 49 CFR Parts 100-180. In order to accomplish his responsibilities under the HMTA the Secretary "...may authorize any officer, employee, or agent to enter upon inspect, and examine, at reasonable times and in a reasonable manner, the records and properties of persons to the extent such records and properties relate to: (1) the manufacture, fabrication, marking, maintenance, reconditioning, repair, testing, or distribution of packages or containers for use by any "person" in the transportation of hazardous materials in commerce; or (2) the transportation or shipment by any "person" of hazardous materials in "commerce."
What is the PHMSA?
The Pipeline and Hazardous Materials Safety Administration (PHMSA) (formerly the Research and Special Provisions Administration (RSPA)) was delegated the responsibility to write the hazardous materials regulations, which are contained in 49 CFR Parts 100-180.
How long does it take to complete hazmat training?
A new hazmat employee who changes job functions may perform those functions prior to completion of training, provided the employee performs those functions under the direct supervision of a properly trained and knowledgeable hazmat employee; and the training is completed within 90 days after employment or job function.
When did hazmat requirements take effect?
In addition to the communications requirements that took effect on October 1, 1993, hazmat employers must have trained hazmat employees hired prior to 07/02/93. For complete definition of hazmat employer and hazmat employee please see definitions contained in appendix A.
When is immediate notification required for hazardous materials?
Immediate notification of a hazardous materials incident by a carrier is required at the earliest practical moment for incidents that occur during the course of transportation (including loading, unloading, and temporary storage) in which as a direct result of the hazardous materials any one or more of the following occurs:
When did the hazardous materials regulations become effective?
The applicability of the hazardous materials regulations was extended to all intrastate shipments of hazardous materials by highway effective October 1, 1998, as published in the final rule, Docket HM-200 dated January 8, 1997.
What are the safety requirements for a bus?
Make sure these things are in good working order before driving: Service brakes, including air hose couplings (if your bus has a trailer or semitrailer). Parking brake. Steering mechanism. Lights and reflectors. Tires (front wheels must not have recapped or regrooved tires ). Horn. Windshield wiper or wipers. Rear-vision mirror or mirrors. Coupling devices (if present). Wheels and rims. Emergency equipment. Access Doors and Panels Close any open emergency exits. Also, close any open access panels (for baggage, restroom service, engine, etc.) before driving. Always check the interior of the bus before driving to ensure rider safety. Aisles and stairwells should always be clear. The following parts of your bus must be in safe working condition: Each handhold and railing. Floor covering. Signaling devices, including the restroom emergency buzzer, if the bus has a restroom. Emergency exit handles. The seats must be safe for riders. All seats must be securely fastened to the bus. Never drive with an open emergency exit door or window. The "Emergency Exit" sign on an emergency door must be clearly visible. If there is a red emergency door light, it must work. Turn it on at night or any other time you use your outside lights. Roof Hatches You may lock some emergency roof hatches in a partly open position for fresh air. Do not leave them open as a regular practice. Keep in mind the bus's higher clearance while driving with them open. Make sure your bus has the fire extinguisher and emergency reflectors required by law. The bus must also have spare electrical fuses, unless equipped with circuit breakers.
What can a bus carry?
Buses may carry small-arms ammunition labeled ORM-D, emergency hospital supplies, and drugs. You can carry small amounts of some other hazardous materials if the shipper cannot send them any other way.
What is the line on a bus called?
This is called the standee line. All standing riders must stay behind it.
What to check in the interior of a bus?
1. Name some things to check in the interior of a bus during a pre-trip inspection. Make sure these things are in good working order before driving: Service brakes, including air hose couplings (if your bus has a trailer or semitrailer). Parking brake. Steering mechanism.
Can you discharge a rider?
Don't discharge such riders where it would be unsafe for them. It may be safer at the next scheduled stop or a well-lighted area where there are other people.
