What is techno metal post technology?
Technology that has at its foundation, an engineered system of on-going research and development, continuous innovation of machine and helical pile design, and technician classroom education and field training. What is a Techno Metal Post? Helical piles have been used for more than 100 years - mostly in heavy duty, commercial construction.
What is techno metal post helical pile?
The Techno Metal Post helical pile is a giant metal screw that is installed by a certified technician using proprietary hydraulic machinery. The pile is screwed into the ground until the desired bearing capacity is achieved.
Why techno metal post of Albany?
Techno Metal Post of Albany is the foundation solution provider for virtually any type of structure you build. The Techno Metal Post helical pile is like a giant metal screw that is installed by a certified technician using proprietary hydraulic machinery. The pier is augered into the ground until the desired bearing capacity is achieved.
Why techno metal post deep foundation?
Over the years, Techno Metal Post has developed a network of quality dealers offering Techno Metal Post deep foundation system, a reliable technique recognized around the world by thousands of clients, construction professionals and competent authorities.
What are helical piles used for?
What are helical piles used for? Helical piles are hollow steel tubes that are used to stabilize structures by anchoring the load to the surrounding ground, much like a driven pile. However, helical piles are screwed deeply into the earth, section by section if necessary.
How much does helical piles cost?
$2,000 to $3,000Each individual helical pier location costs an average of $2,000 to $3,000 in Southern California and Arizona. These prices may even be steeper depending on your state due to the increase in steel prices and the current transportation fiasco due to COVID-19.
Can you install helical piers yourself?
Can You Install Helical Piers Yourself? Yes! PierTech offers a helical installer certification seminar once a month. There are no requirements to be completed prior to the course, you could be a beginner in the industry, or have several years experience.
What is a helical pier?
A helical pier is a foundation pin made of steel that contains helices just like screws. It is driven into the soil, to depths below the frost line by use of a hydraulic system.
Are helical piers cheaper than concrete?
Price Comparison between Helical Piers and Concrete Footers Every pier is around $175, and there are two piers required per hole. That puts you somewhere in the range of $350 per hole, of which a project typically needs six to eight. For hard materials, you're sitting around $2,100 to $2,800.
How long do helical piles last?
As per the condition and load helical piers can last up to 120 years and even more.
Are push piers better than helical piers?
Helical piers hold your home in place just like screws hold a shelf up. Installing helical piers is a faster, more efficient process than push piers. There will be minimal excavation, noise pollution, and can be installed inside or outside the home.
What is the average cost of helical pier installation?
The average cost of installing helical piers ranges from $48 to $143 per foot. Therefore, for standard installations where 21-foot long piles are used, the price will be between $1,000 and $3,000 per pier.
Do helical piles rust?
Helical piles are made up of galvanized steel to protect it from rusting. They are generally round hollow shafts or square solid shafts made from steel.
What does a helical pier look like?
0:166:18Helical Piers for Foundation Repair? Pros, Cons & Homeowner TipsYouTubeStart of suggested clipEnd of suggested clipWhen the piers reach load-bearing soil a steel foundation bracket is attached to your home's footingMoreWhen the piers reach load-bearing soil a steel foundation bracket is attached to your home's footing. And connected to the helical piers.
What is the difference between footings and piers?
A pier is a concrete columns that's cast atop of a footing and is connected to the footing by steel rebar. The pier, built between the footing and the ground level, usually extends above ground level so wooden posts can be mechanically anchored to the pier.
Do helical piers lift?
Jack stand is attached to helical piers system to lift foundation transferring load to helical plates in load-bearing soil.
New dealer in U.K
Stephen Angus has recently joined Techno Metal Post by creating Techno Metal Cambridge! Well… to tell the truth, Stephen...
An Environmentally Responsible Solution
Caring about our planet is a priority for Techno Metal Post. As important as durability and security, protecting and...
New Dealer in Poland
Techno Metal Post is very pleased to announce our unique, highly effective helical pile foundation system is now available...
New Dealer in Chester Springs, PA, USA
Tim Durham is the newest dealer to join our Techno Metal Post family, establishing TMP Chester Springs (Chester County...