11 Different Types of Drywall Texture (Finishes)
- 1. Splatter Knockdown This is an interesting wall texture. ...
- 2. Orange Peel This is another common wall texture. ...
- 3. Popcorn Ceiling This is a stucco ceiling with small bumps all over it. ...
- 4. Skip Trowel This is a wall texture that has been around for many years. ...
- 5. Slap Brush ...
- 6. Comb ...
- 7. Santa Fe Drywall ...
- 8. Rosebud Dry Wall Texture ...
Full Answer
What is Type X drywall?
What is the thickness of drywall?
What is soundproof drywall made of?
What is the advantage of drywall?
What is blue board drywall?
Is blue board drywall good for mud?
Is purple drywall the same as regular drywall?
See 2 more
What is the most popular drywall finish?
The orange peel design is perhaps the most common wall texture. It's common because it's easy to apply and affordable for anyone to access. The orange peel texture looks and feels like a citrus rind, hence the name.
What is Level 5 drywall finish?
A Level 5 finish is a premium finish, and the highest degree of quality in drywall. It requires all aspects of a Level 4 finish and an additional skim coat of joint compound to cover the entire surface. A Level 5 finish provides a uniformly smooth surface that is obvious in the most severe lighting conditions.
What is the latest trend in drywall texture?
Smooth texture. Smooth texture is all in the name—it has a sleek and finished look that lends itself to the modern and minimal style that is all the rage today.
What are different types of drywall textures?
7 Types of Wall Texture and the Techniques Behind ThemComb. The comb texture is produced using techniques that create lines of various widths and shapes in drywall compound. ... Popcorn. Photo: istockphoto.com. ... Orange Peel. ... Knockdown. ... Sand Swirl. ... Slap Brush. ... Slap Brush Knockdown.
Is level 4 drywall finish good enough?
If the drywall is to be wallpapered, textured, or painted with flat paint, a Level 4 finish is perfectly acceptable. But at this level of finish, any joints and imperfections can show when they're under a coat of glossy paint or flooded with bright light.
Is there a level 6 drywall finish?
There are six finish levels for drywall surfaces, used for walls, ceilings, or other drywall construction, that are defined by the major drywall construction, painting, and manufacturing trade associations. The levels are numbered from 0 to 5.
What Sheetrock texture is best?
Probably the best-known drywall texture, “popcorn ceiling” gets its name from its slightly extruded, rounded knob-like texture. Its uneven distribution makes it particularly popular when there's a need to cover up ceiling repairs. Plus, it has the benefit of slight sound dampening.
Are textured walls in for 2022?
Are textured walls in Style 2022? Yes, textured walls are definitely in style for 2022. If you're looking to add a bit of interest and dimension to your space, consider textured walls. There are a variety of ways to achieve this look, so you can find the perfect option for your home.
Which is better orange peel or knockdown?
Orange peel can be considered more durable for most cases as there's not much material to be damaged. Knockdown texture is more susceptible to breaking since the textures' area is much larger than orange peel.
What are the 4 types of texture?
There are four types of textures that appear in music, Monophony, Polyphony, Homophony, and Heterophony. These four textures appear in music from around the world.
Are orange peel walls outdated?
It was popularized in the housing boom of the 1960s and is therefore still present today in many American homes. This, however, also means that it does feel and look a little dated. On the other hand, the orange peel texture feels and looks smoother comparatively but isn't, really.
What is the most common wall texture?
Orange Peel This “orange peel” finish is perhaps the most common wall texture. It can be applied with a thick nap roller, or more commonly sprayed on using a mud hopper and air compressor.
Do you need level 5 drywall finish?
Some drywall tradesmen are able to use a level four finish (everything but the skim coat) to create a suitable smooth finish on walls. Ceilings that are finished smooth will always require a level five finish. In areas of critical lighting a level five finish is absolutely necessary.
Is level 5 drywall expensive?
You can expect to pay around $2.25-$3.00 per square foot for level 5 finish drywall.
How do you paint a level 5 drywall finish?
0:544:44Level 5 Drywall Finish - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd give it a light sanding before priming then painting a skim coat is the more traditional methodMoreAnd give it a light sanding before priming then painting a skim coat is the more traditional method of achieving a level 5 finish. Because it can be time-consuming.
What is a level 4 finish on drywall?
Drywall Level 4 This level is typically used where flat paints, light textures, or wall coverings are to be applied. In critical lighting areas, flat paints applied over light textures tend to reduce joint photographing. Gloss, semi-gloss, and enamel paints are not recommended over this level of finish.
What is knockdown drywall?
Knockdown is a term that refers to the general technique of spraying, stomping, or brushing on drywall mud, and then dragging a tool over the still-wet material, flattening it into a random pattern.
How to create wall texture?
Wall texture types can be created by using a paint sprayer, a special brush, or a trowel or knife. Some designs call for a combination of these methods. Here’s a gallery of the visually appealing styles and patterns you can produce within each of the three application categories.
What brush do you use to make sand swirls?
The mesmerizing patterns of the sand swirl texture can be made with a thickly bristled brush, like a wallpaper brush. The arched designs can vary, from half fans to spirals to interlocking C shapes.
What do people think of drywall?
However, once you make your choice, you would be amazed at how much you can do to makeover a room. When people think of drywall, they think "boring.". If that's your thinking, the following five types of drywall finishes and textures will change your mind. 1.
What is a good knockdown for drywall?
Some types of knockdowns to try are California Knockdown, Slapbrush Knockdown, and Drywall Knockdown. 3. Swirl. Swirl is an excellent choice for a drywall finish if you prefer a smooth looking wall to the rough and "bumpy" appearance of some of the other drywall finishes.
Why is knockdown more expensive than other textures?
Knockdown. This takes more work than many of the other textures because you have to prime and paint it . It also tends to be more expensive than the other drywall finishes. The textured wall is "bumpy" when finished, with unique shapes that are raised from the walls.
Is spray sand a good finish for drywall?
If you're on a budget and need to keep your costs down, Spray Sand is one choice to explore for a drywall finish. It's a cheaper way to finish the drywall, requiring only one coat of paint to be applied to the texture. Like the name suggests, the finished wall looks like sand, creating tiny bumps on the wall. It doesn't look cheap, either. With the right coat of paint, your finished walls can look like any one of the more expensive textures.
Does drywall look cheap?
It doesn't look cheap, either . With the right coat of paint, your finished walls can look like any one of the more expensive textures. The type of drywall finish and texture you select depends on the room and its decor.
Intro to Drywall Texture – What is Drywall Texture?
Drywall texture is created using drywall joint compound, which is commonly known as mud. Anyone who does drywall is familiar with mud because it is used in every drywall installation, regardless of texture. Mud is a smooth, clay-like substance that is used to cover joints (joint tape), fasteners, imperfections and create an even finish.
Why Use Drywall Finish Textures?
There are three main reasons why drywall finish textures are so popular among homeowners.
What Are the Different Drywall Texture Types?
There are many drywall textures that are known by more than one name. The chart below offers a quick look at well-known texture types with their common name, appearance, and cost. We also include with each texture whether or not it requires a sprayer.
Downsides of Drywall Texture
While there are plenty of great reasons to consider drywall texture for your home, there are also a few cons that are good to know before you begin your project.
Why use texture drywall?
Remember that the reason most drywall texture types are used is that they’re easier to install than making a surface smooth. So the next time you see a truly smooth drywall finish take a moment to appreciate the skill and artistry that went into its creation! How to apply a skim coat for the perfect Level 5 finish.
How to make a ridged texture on drywall?
An older technique that’s a lot of fun to apply, the stomp brush technique involves dunking a large brush in a bucket of drywall mud, pressing it against the ceiling, then sharply pulling it back down to create a distinctive, ridged texture.
What is a sand swirl finish?
A sand swirl finish is a combination of two other drywall texture types, namely the sand spray and comb techniques . The swirls are created by using a medium or thick bristled brush (think of a wallpaper brush, shown here, or the bristles on the back side of an ice scraper). The pattern can be orderly rows of half fans, or it can be more complex such as interlocking Cs or spirals. The swirls can be created in a pre-applied bed of mud, or the brush can be dipped into a bucket and the swirls laid down like paint.
What is spray sand ceiling?
The spray sand ceiling texture is exactly what it sounds like! Sand is mixed with primer, water, or very thin mud, and then sprayed onto the ceiling through a hopper gun (shown here). When done properly it gives a textured surface that doesn’t crack and separate like an orange peel texture. Often applied as a subtle accent, spray sand is primarily found on ceilings, but can be found on walls, as well.
Can you paint lace drywall?
First, a layer of drywall mud or paint is laid down on the ceiling or wall. If drywall mud is used, it should either be painted or mixed with a color (you can’t paint it after the next step!).
Can drywall mud be sculpted?
Of course, drywall mud isn’t the only unusual material that can be sculpted. If you’d rather start with something less permanent, here are 14 incredible ice and snow sculptures for inspiration.
How many levels of drywall finishing?
Drywall finishing requires a good deal of craftsmanship, which is why the gypsum wallboard industry and drywall professionals have codified a set of professional standards that breaks the process of finishing drywall into five distinct levels.
What level of drywall do you use for wallpaper?
Level 4: This is the classic drywall finish. Here, you apply another coat of joint compound to the tape and screws and sand the dried compound. This is the level that typically is used when a wall surface will be painted or covered with wallpaper.
What is level 3 finish?
Level 3: At this stage, finishers apply a coat of joint compound to the tape and screws. Walls that will receive a heavy texture, such as knockdown texture, can end at this level. It would be pointless to progress beyond this level since texturing will produce a finish that is rougher than level 3.
Can you spray finish drywall?
Spray finish: Professionals have spray equipment to allow them to spray on drywall compound. This type of equipment can be rented at rental yards or even at some home improvement stores.
When do you need a level 5 finish?
There are two instances when you need a level 5 coating: when the finish will be glossy; or when light is be angled low enough to highlight bumps and depressions. A level-5 finish is like icing on the cake. It's a premium finish that you will not get by default; you absolutely will need to discuss this with your contractor or drywall installer, as it is not normally considered part of the finishing process.
Is hanging drywall a do it yourself project?
Hanging drywall is a relatively straightforward project, even for do-it-yourselfers. And because it is an interim step in the overall process of finishing a wall, any mistakes that do occur can still be covered up. But the final task of finishing drywall can easily frustrate even very skilled do-it-yourselfers.
Can you talk to a contractor about finishing drywall?
Drywall finishing levels, in numeric terms, are not a normal part of the conversation between homeowners and contractors. Instead, you might discuss the final look or effect that you're aiming for. You might indicate that you want the dining room walls to be as smooth and flawless as possible or that the garage can have largely unfinished walls. It'll be up to the contractor to translate your requests to the drywall technician.
What is the best way to cover up cracks in sheetrock?
Changing up textures is also a great strategy for covering up cracks and other cosmetic problems in your sheetrock.
Is the texture of a sandbox smooth?
While not perfectly smooth, the plain color hides most of the texture, and it comes nowhere close to the rougher look of something such as the popcorn or spray sand textures.
Can popcorn texture be used on walls?
Although the popcorn texture could theoretically work on walls , people most commonly use this texture on ceilings. It’s an extremely popular drywall texture for multiple reasons, the most important being that it is low maintenance.
Is there anything wrong with drywall texture?
Many people just assume they should stick with the standard drywall texture of a classic smooth finish. There’s nothing inherently wrong with this, but you shouldn’t shy away from more creative textures because you think they are difficult .
Can you use swirl texture on walls?
There are a variety of ways you can use a swirling texture on your wall, and this example showcases how the large swirls look.
Can plaster relief texture be flattened?
The plaster relief texture showcased in this example highlights the fact that even an intense texture can be flattened into a more subtle look.
Can you customize drywall textures?
Hopefully, you now have a good idea of how much style and creativity drywall textures can bring into your house. The textures range from subtle and cheap to lavish and expensive, and you can customize most of them to fit your specific décor.
What is Type X drywall?
Type X drywall is made with special noncombustible fibers.
What is the thickness of drywall?
It probably is the most economic drywall type and comes in different sizes ranging in thickness from 3/8 inches to one inch. This is the most common type used and is normally available in four by eight foot panels.
What is soundproof drywall made of?
Soundproof drywall is composed of laminated drywall made with a mix of wood fibers, gypsum, and polymers increasing the STC (sound transmission class).
What is the advantage of drywall?
One important advantage that drywall offers is the presence of tapered edges on the long edges of drywall sheets that, when joined together, form a shallow recess for drywall tape and joint compound that allows for invisible finished joints. There is also an ECO board made from recycled material to create drywall that looks like concrete.
What is blue board drywall?
Blue board drywall is also known as plaster baseboard. Blue board is used for veneer plastering, and the surface paper has special absorption qualities.
Is blue board drywall good for mud?
It has a high water and mold resistance and there are fewer steps involved in veneer plastering. Blue board drywall is not made for mud, tape, or paint. It works extremely well in bathrooms or places with a lot of moisture and helps reduce noise.
Is purple drywall the same as regular drywall?
Purple drywall offers the same advantages as regular drywall, but with superior moisture- and mold-resistant characteristics.
