The weight of the product is 1.7 pounds. Some of the active ingredients are Sodium, Water, Hypochlorite, N-methyl-N- (1-oxododecanoyl)- sodium salt. It is very easy to use; you can easily remove the stains without the need for heavy scrubbing.
How do you eliminate mold and mildew?
Remove all of the shelves, trays ... use a solution of water and vinegar, which kills mold and mildew, and leave the door open for several days. Then stuff the fridge or freezer with rolled-up newspapers, allowing it to sit for several days before washing ...
What is the best mold and mildew cleaner?
- Hydrogen Peroxide
- Vinegar – Pour undiluted white vinegar into a spray bottle and use it safely.
- Baking soda
- Bleach
- Dettol
- Isopropyl alcohol
- Microfibre cloths
How to safely remove mold and mildew?
- Wear a mask or an N-95 respirator to avoid inhaling mold.
- Wear gloves that extend to the middle of your forearm. If you’re just using water and a mild detergent, household rubber gloves work fine.
- Wear goggles that don’t have ventilation holes to avoid getting mold or spores in your eyes.
Does Tilex work on black mold?
does tilex remove mold? Tilex disintegrates and removes mold and mildew with just one spray. It kills 99.9% of household mold & mildew and eliminates stains before your eyes. It contains Clorox bleach so don't use it on fabric or materials that will be damaged by chlorine bleach. The other is called Mold Armor.
What are the active ingredients in Tilex?
Active Ingredient: Sodium Hypochlorite - 2.40%. Other Ingredients - 97.60%. Total - 100.00%.
How toxic is tilex?
Harmful if swallowed. May cause nausea and vomiting if swallowed. The following medical conditions may be aggravated by exposure to high concentrations of vapor or mist: heart conditions or chronic respiratory problems such as asthma, emphysema, chronic bronchitis or obstructive lung disease.
Is Tilex mold and mildew safe?
This mold and mildew remover spray is safe to use on glazed and unglazed ceramic tile, grout, vinyl, fiberglass, and plastic. Use this no scrubbing bleach cleaner to clean and disinfect tubs, shower doors, vinyl shower curtains, counter tops, no wax floors and sinks.
Does Tilex mold and mildew have bleach?
Powered by Clorox Bleach, this mold and mildew disinfectant spray delivers a powerful clean without scrubbing common bacteria found in homes such as Staph, Strep and Athletes foot fungus. It penetrates and lifts off soap scum with detergent-type surfactants to kill the mildew lurking below the surface.
Did they discontinue tilex?
Luckily, it is still available.
What happens if you breathe in mold remover?
Burns in the airway or gastrointestinal tract can lead to tissue death. This may result in infection, shock and death, even several months after substance was swallowed. Scar tissue in the affected areas can lead to long-term problems with breathing, swallowing, and digestion.
How do you make homemade tilex?
A Simple DIY Tilex Recipe However, I was selling my house and it kept the shower clean without much extra work. A formula I found on the Internet (don't remember the source) is 1/2 tsp. shampoo with 1/2 cup vinegar and 2 cups water. Sponge on tub or shower and let sit a few minutes.
What is the best mold and mildew remover?
Best Overall: RMR-86 Instant Mold & Mildew Stain Remover The RMR-86 Instant Mold Stain & Mildew Stain Remover spray is our best overall pick because it meets all of our criteria: a mildew remover that can tackle almost every surface, is budget-friendly, and works quickly.
Will vinegar get rid of mold?
Vinegar has antifungal and antibacterial properties, and it can be a cheap and effective treatment for many types of mold. Household white vinegar typically contains about 5 to 8 percent acetic acid.
How long do you leave tilex on?
To kill mold & mildew on hard, porous surfaces such as grout and cement: Spray surface until thoroughly wet, let stand 10 minutes and rinse. Rinse immediately after use on rubber, plastic and vinyl.
Does Scrubbing Bubbles remove mold?
Scrubbing Bubbles Foaming Bleach Bathroom Cleaner is a deep penetrating foam that clings to your bathroom surfaces, scrubbing away bathroom stains. The unique trigger dispenses a foam that erases mold and mildew stains, cleans soap scum, and leaves behind a brilliant shine.
Should bleach be used to clean mold?
The EPA does not recommend using bleach to kill or remove mold, except in special circumstances. In most cases, “a background level of mold spores will remain” after the application of bleach. “Bleach only kills surface mold, not the membrane underneath,” according to ServiceMaster. “That means the mold will grow back.
How long can you leave tilex on?
So it's a good thing we've discovered Tilex® Mold and Mildew. Tilex® Mold and Mildew Remover contains Clorox® Bleach, and disinfects as it kills 99.9% of household mold and mildew on hard, nonporous surfaces. There is no scrubbing required – just spray it, let it sit for 5 minutes and rinse. Say what?!
How good is tilex?
It's the best product I've find to date that really works well. Leaves the shower looking and smelling fresh and clean. Works extremely well you will never be disappointed with this product. You can't go wrong with the antibacterial it definitely works and you can smell it working.
How do you remove mold and mildew from tilex?
Wipe with a wet sponge or cloth, and rinse. Heavy mildew buildup may require longer contact time or two cleanings. To kill mold & mildew on hard, porous surfaces such as grout and cement: Spray surface until thoroughly wet, let stand 10 minutes and rinse. Rinse immediately after use on rubber, plastic and vinyl.
Does tilex contain bleach?
PHYSICAL AND CHEMICAL HAZARDS: This product contains bleach. Do not use or mix this product with other household chemicals such as products containing ammonia, toilet bowl cleaners, rust removers, vinegar or acid.
Overview
Tilex Mold & Mildew Remover Spray is used for Wounds, Microbial infections and other conditions. Tilex Mold & Mildew Remover Spray may also be used for purposes not listed in this medication guide.
Uses
Tilex Mold & Mildew Remover Spray is used for the treatment, control, prevention, & improvement of the following diseases, conditions and symptoms:
Side-effects
The following is a list of possible side-effects that may occur from all constituting ingredients of Tilex Mold & Mildew Remover Spray. This is not a comprehensive list. These side-effects are possible, but do not always occur. Some of the side-effects may be rare but serious.
Precautions
Before using Tilex Mold & Mildew Remover Spray, inform your doctor about your current list of medications, over the counter products (e.g. vitamins, herbal supplements, etc.), allergies, pre-existing diseases, and current health conditions (e.g. pregnancy, upcoming surgery, etc.).
Interactions with Tilex Mold & Mildew Remover Spray
If you use other drugs or over the counter products at the same time, the effects of Tilex Mold & Mildew Remover Spray may change. This may increase your risk for side-effects or cause your drug not to work properly.
When not to use Tilex Mold & Mildew Remover Spray
Please consult your physician or pharmacist or product package for this information.
Composition and Active Ingredients
Please note that this medicine may be available in various strengths for each active ingredient listed above.
Tilex Mold & Mildew Remover, Refreshing Breeze
How does it rate: Scores for similar cleaners ranged from A to F . Search for a better Mold and Mildew Remover
Product ingredients
Moderate Concern: chronic aquatic toxicity; Some Concern: skin irritation/allergies/damage, developmental/endocrine/reproductive effects
