What are the Parts of a Baitcasting Reel?
| A | FOOT |
| B | BRAKES |
| E | DRAG CONTROL |
| F | SPOOL |
| G | THUMB BAR |
- The Handle.
- The Spool.
- Drag.
- Line Guide.
- Brakes.
- Cast Control Knob.
- Thumb Bar or Spool Release.
- The Reel Foot.
What to look for in a baitcast reel?
- High speed reel that can bring in line at lightning speed
- Extremely smooth cast and retrieval
- Ready for both fresh and saltwater
How to put a fishing line to a baitcasting reel?
Steps To Put Line On A Baitcaster Reel
- Step: 1- Choose a Good Line. First, you will need to make sure you have or buy a suitable line. ...
- Step: 2 – Soak For A While to Prevent Tangling. You can soak your fishing line for around 30 minutes in warm water, and it will help stop the line ...
- Step: 3 – Continue Threading. ...
- Step: 4 – Rewind the Line. ...
- Step: 5 – Turn the Handle And You’re Done. ...
How to adjust and cast a baitcasting reel?
first step in properly adjusting a baitcaster is setting the spool tension. The spool tension knob is located on the same side of the reel as the handle, normally right behind the star drag. To set this, reel your bait almost to the tip of your rod (within a couple inches). Hold your rod up at a 45 degree angle to the ground. Push the
How to choose the right baitcasting reel?
What Do You Need To Know About Baitcasting Reel Sizes?
- Baitcasting Reel Size Chart
- Line Capacity. The line capacity of a baitcaster is the longest length that the reel’s spool can handle. ...
- Gear Ratio. A reel’s gear ratio determines the number the spool revolves for each handle revolution. ...
- Drag. ...
What are the parts of a reel called?
Parts of a Fishing ReelReel Body. The reel body or housing refers to the main component of a fishing reel. ... Reel Handle. The reel handle is one of the most important fishing reel parts. ... Reel Spool. ... Drag Adjustment. ... Bail. ... Anti-Reverse Switch.
What do the dials on a baitcaster do?
Magnetic brake systems use moving metal magnets and electromagnetic forces to slow the spool speed down. This system is usually controlled by a dial on the side of the reel that is tightened or loosened during the cast.
What is the knob on the side of a baitcaster?
0:143:17How to Set Anti-Backlash Settings on Baitcasting Reels - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you're getting a lot of backlash. Right at the beginning of your cast is that spool starts toMoreSo if you're getting a lot of backlash. Right at the beginning of your cast is that spool starts to spin you're going to want to tighten down this knob.
How does a baitcaster reel work?
A baitcasting reel has an open face. The spool rotates parallel to the rod. Unlike the spinning reel, the spool of the baitcasting reel actually rotates. An oscillating bail winds line onto the spool of a spinning reel.
What do the magnets do on a baitcaster?
2:2110:52Find out HOW Baitcaster BRAKES Work! (Adjusting Brakes on YOUR ...YouTubeStart of suggested clipEnd of suggested clipField the magnets put off their own magnetic field once the spool starts turning those forces opposeMoreField the magnets put off their own magnetic field once the spool starts turning those forces oppose each other and it slows the spool.
What does a flipping switch do on a baitcaster?
In a regular baitcast reel, the thumb bar stays depressed and you have to turn the handle to engage the reel. With a flipping switch engaged, the thumb bar pops back up when you release your thumb, making it easy to engage the reel without using both hands.
How tight should drag be on baitcaster?
1:263:56Setting Drag and Spool Tension, Baitcast Reel Basics ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can certainly go a little bit tighter than that but you definitely want to make sure as you'reMoreYou can certainly go a little bit tighter than that but you definitely want to make sure as you're starting out that when they you release that sinker with the rod held up at a 45 degree angle.
Where is the spool tension on a baitcaster?
0:133:07How To Setup Your Baitcaster Reel (Spool Tension, Magnetic Brake ...YouTubeStart of suggested clipEnd of suggested clipIt's usually between the handle and the spool it increases the resistance of your weight of yourMoreIt's usually between the handle and the spool it increases the resistance of your weight of your lure.
Why is my baitcaster not casting far?
DON'T FILL THE SPOOL If a spinning reel spool is half full, it will not cast as well because there is increased friction as the line uncoils off the spool. With a baitcaster, you can cast to the very bottom of the spool with the same lack of friction as you would if the spool was full.
Why is Baitcaster better than spinning?
Baitcast reels can handle heavier line and actually allow for longer casts than spinning gear in the same size range. Bass anglers regularly use line in the 14- to 17-pound-test range. Muskie and catfish anglers use even heavier line.
Why do bass fishermen use Baitcasters?
For using “power techniques”, working with heavier lures like crankbaits and ½ oz. spinnerbaits, or fishing in heavy weeds where you need strong line, Nels recommends baitcasters because they have more torque and handle heavy line better.
How do you rig a baitcaster?
7:079:20How To Set Up NEW Fishing Rod with Baitcaster - Beginners 101 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd that's going to lay completely flat. Now a little trick that you can also do to hide this hookMoreAnd that's going to lay completely flat. Now a little trick that you can also do to hide this hook is to put it right up underneath. The worm. So just push it up and then back onto the barb.
What is the knob on the side of a baitcaster?
The knob on the side of a baitcaster is the spool tensioner adjustment. It is the most important step in setting up a baitcasting reel.As outlined...
Why are baitcaster handles on the right side?
Newsflash! That was true until relatively recently, but newer models now have handles available on both sides of the baitcasting reel.The original...
What does the tension knob do on a baitcaster?
The tension knob is protection against backlash. The knob located just behind the handle should be adjusted on most reels before casting with diffe...
What are the adjustments on a baitcast reel?
There are three adjustments you can make with a baitcasting reel. They are the line tension, the brakes, and the drag.To set the line tension, foll...
Why do bass fishermen use baitcasters?
The simple reason that bass fisherman use baitcasters is for control. A baitcaster provides the control bass fishermen require for accurate casts i...
What is the button on a baitcaster called?
The button is called a spool release button, and it’s used to release the spool at the precise time during a cast. After a little practice, you’ll...
What is the key feature of baitcasting reels?
An essential feature that you need to master on baitcasting reels is controlling spool rotation during a cast . When you cast with a baitcasting reel, the weight of your lure causes the spool to rotate, which essentially ‘unwinds’ the line during the cast.
How does a baitcasting reel work?
In the case of low profile baitcasters, the foot is recessed, and as a result the reel body nestles right on top of the rod, without sticking out. This helps to make it extremely ergonomic, and easy to handle for long periods of casting.
What should you look for in a baitcaster?
A great way to judge the quality of a baitcaster is by looking at the performance of its parts. The specific features you’ll want to look for in a baitcaster depend on what application you’ll be using it for.
How many brakes does a baitcaster have?
Many baitcasters have 6 centrifugal brakes, and setting them to maximum would mean sliding all 6 to their active position. If your baitcaster has magnetic brakes, these can usually be adjusted externally with a dial on the side of the frame (on the side of the reel which is opposite to the handle – see photo above).
What does a spool tensioner do?
Unlike the centrifugal and magnetic brakes, the spool tensioner slows down spool rotation more towards the end of the cast, when the lure is about to hit the water, and stops pulling line off the spool.
Why are slow reels better than big game reels?
Slow reels have more torque, which can be helpful when you’re fighting big, strong fish. Because of this, big game reels (which are basically super sized baitcasters), have two gears: a high gear for retrieving the lure, and a low gear for fighting the fish. See also: baitcasting reel gear ratio explained.
Why are baitcasters so popular?
by Bill Laney. Baitcasting reels are very popular among many anglers, due to the fact they have greater casting accuracy and distance compared to other types of fishing reels, most notably spinning reels. In addition to better casting performance, baitcasters also tend to be more lightweight than spinning reel sizes that are comparable in term ...
What are the brakes on a baitcasting reel?
Brakes. Baitcasting reels have brake systems to assist in the reduction of backlash. Brake systems are either magnetic or centrifugal. The brakes are adjustable, allowing you to tune your reel to conditions, rig, and desired casting distance.
How Do You Set Up a Baitcasting Reel?
Once you’re rigged up, you need to set up for fighting fish and for casting.
What is the difference between a baitcaster and a spin spool?
The benefit of this configuration is strength and rigidity. However, the most critical difference between a baitcaster and a spin spool is that a baitcaster spool rotates.
Why do baitcasters have brakes?
As an aid to avoid overrun or backlash, baitcasters have a set of adjustable brakes that allow you to regulate the amount of pressure on the spool so that your spool does not spin faster than the line is traveling from the reel.
What are baitcasting reel knobs made of?
The knobs come in a significant variety of shapes and styles, often made from plastic, EVA, and cork. There’s little more to be said about the handle. However, in my opinion, it’s one of the most critical parts of the overall reel feel. For me and many other anglers, choosing a baitcasting reel is all about feel.
What is the foot on a spinning reel?
The reel foot connects the reel to the rod. You’ll notice a significant difference between spinning reels and baitcasters here.
What does it mean to have more brakes on a reel?
By and large, more brake means less chance of backlash. However, more brake will also mean reduced casting distance – and significantly in many cases. Magnetic brakes are adjusted using a conveniently located dial on the side of the reel.
What is brakes on baitcasting reel?
The brakes are a unique part of the baitcasting reel that come into play when controlling backlash (the tendency of the line to tangle). This backlash is a challenge of the baitcasting reel set-up which tends to dissuade beginners from use.
Where should the foot be on a baitcasting reel?
This placement ensures the line comes straight from the starting guides and passes into the water for smoother and a relatively friction-free cast.
What is the foot on a fishing reel?
Common on most fishing reels is the foot, the point of attachment between reel and rod. Shaped rectangularly or squarely to fit the frame of the rod holder, it’s integral that a baitcasting reel’s foot is solid, firmly fixed and durable enough to withstand the pressure and torque of casting and retrieving.
How does a spinning reel line guide work?
Analogous to the power roller on a spinning reel, the line guide moves back and forth left and right as the angler rotates the reel handle. This motion is often described as being similar to an “ old typewriter ”.
What is the reel foot on a baitcaster?
The reel foot of a baitcaster also pairs up with the reel seat. This is the part of the rod that houses the reel and usually has a threaded keeper that is moved down by hand to fix the detachable reel into place. Ensuring these two components match up is critical in ensuring that neither part separates.
How does a magnetic brake work?
Magnetic brake systems use moving metal magnets and electromagnetic forces to slow the spool speed down. This system is usually controlled by a dial on the side of the reel that is tightened or loosened during the cast.
What is spooling on a rod and reel?
Spooling the line is one of the most important things you can do when setting up your rod and reel. Line that has been spooled incorrectly or with insufficient pressure can very quickly loop off the reel, tangle, and break.
What is the first component of a baitcasting reel?
The first component of the baitcasting reel that you need to know about is the foot.
What is the next baitcasting reel component?
The next baitcasting reel component that plays a very important role is the handle itself , which is of course the part of the reel that you turn in order to retrieve that lure, and hopefully a fish on it too.
How does a Baitcasting Fishing Reel Work?
When you go to cast, right when the rod reaches the right angle (the exact angle you choose to release the line at depends on the casting distance you hope to achieve), you have to press the thumb bar.
What Is The Thing On The Side Of The Baitcaster?
Unfortunately, we cannot be more precise with our answer here because the simple reality is that the thing on the side of your baitcasting reel could be the handle, the tension control knob, the drag control knob, the brakes, or anything else of this sort. There are many things located on the side of a baitcasting reel.
What is the most common type of fishing reel?
One very common type of fishing reel that is often used by professional anglers is the baitcasting reel which has a lot of cool, and essential features.
What does it mean when a fishing reel is locked?
So, when the fishing reel’s spool is locked so that it can only retrieve line instead of letting it go, if you have the drag set to 10 pounds, it means that a fish would have to exert 11 pounds of force in the other direction in order to cause line to come off the spool.
Where is the foot of a baitcasting reel?
Unlike a spinning reel, where the reel is fixed to the bottom of the rod, on a baitcasting reel, the foot and the rest of the reel are fixed to the top of the rod.