what are the parts of a gas grill

What Are the Different Parts of a Gas Grill?

• Igniters. These small parts are designed to make lighting your gas grill easier. ...
• Burner Tubes. These are long cylinders of metal, perforated by rows of small holes along their length. ...
• Manifold. Grill manifolds are metal pipe assemblies that connect the gas supply to the burner tubes. ...
• Regulator. ...

Full Answer

What are the different types of gas grill parts?

What Are the Different Parts of a Gas Grill?

• Igniters. These small parts are designed to make lighting your gas grill easier. ...
• Burner Tubes. These are long cylinders of metal, perforated by rows of small holes along their length. ...
• Manifold. Grill manifolds are metal pipe assemblies that connect the gas supply to the burner tubes. ...
• Regulator. ...

How does a gas grill differ from an electric grill?

While an electric grill will provide more even cooking than a gas grill—the gas version delivers a more authentic char-grilled flavor. Electric grills allow you to just plug-in and cook. Gas grills demand a little more preparation and cooking skill—although they’re still not as complicated to control as charcoal types.

What can I do with an old gas grill?

What can I do with my old gas grill?

• Remove the tank. The first thing you need to do is to remove the gas tank from the grill.
• Dismantle the grill. Although this will take a little time, it's absolutely necessary.
• Recycle the parts. All those parts ( the cooking grate, rock gate, igniter, and burner assembly) should be taken to a recycling center.

How to clean your gas grill and grill parts?

Light Cleaning

1. When your grates are completely cool, scrub the grates with a nylon bristle grill brush to remove any food residue.
2. Using grill grate cleaner, spray the grates and warming rack, holding the spray 8 to 12 inches from the surface of the grates.
3. Scrub the grates again and wipe them thoroughly using a soft, dry cloth or paper towel.

More items...

What are the things in a grill called?

A gas grill anatomy is broken into three sections : The Hood, The Cooking System and The Grease Management System. The Cooking System is composed of the firebox and its interior components - Burner, Cooking Grates, Heat Distribution and Ignition.

What is the bottom part of a grill called?

grease tray / drip panWhat is the bottom part of the grill called? The bottom of the grill is called a grease tray / drip pan. It is a separate part in some grills that catches the grease and drippings from the delicious food you cook on your gas grill.

What is the thing hanging on the side of the grill?

This chain is called the matchstick holder and is used to manually light the grill in case an issue should arise with the electronic igniter system.

Can you replace parts of gas grill?

Parts You Can Replace or Upgrade The most common points of wear for gas grills are the burner tubes, burner shields, cooking grates, thermometer, electric igniter and the propane regulator.

What is the rack on a grill called?

The warming rack is a grate found on most medium- and large-sized grills that's used to either cook food at a lower temperature or keep food warm. It's typically located several inches above the grill's main cooking grate. As a result, food placed on the warming rack is exposed to less heat.

What part of the grill is hottest?

Even when you're grilling with the lid off, you need to think about the bottom vent. The more open it is, the more oxygen is supplied to the charcoal, which makes it burn hotter.

What is the metal stick on a grill for?

Most of our full-size gas grills come with a little chain that has a small metal stick attached to the end of it. This chain/stick is called the match-stick holder, and it can be used to manually light the grill if there's a problem with the electronic ignition system.

What is the firebox on a gas grill?

Firebox. This is the section where your burners are located. This is usually the area that fails first on cheap grills. Since it can't be repaired, it forces the owner to buy a new grill.

Can you flip grill grates?

Start by flipping your GrillGrates over so that the flat side is facing up while on your grill. Turn your grill on. Using our Grate Scraper Tool or a clean paint scraper gently scrape the flat side to remove any built-up crud. Let the thickness of the type of food you are cooking dictate how hot your grill should be.

Is it worth it to fix an old grill?

Even if you keep your grill clean and covered, parts can wear out. If your grill is still under warranty, fixing it is a no-brainer. Otherwise, compare the cost of new parts and the grill's overall condition with the cost of a new one.

How long does a gas grill usually last?

5 to 15 yearsThe average American replaces their grill every three years. However, routine maintenance and timely repairs can extend that lifespan by many years. Business Insider says proper cleaning and care can keep a gas grill in peak operating condition for 5 to 15 years.

What is a manifold on a gas grill?

Grill manifolds are metal pipe assemblies that connect the gas supply to the burner tubes. They're usually installed on the front of a gas grill, beneath the burner control knobs and a protective cover.

What is a grill grate?

The grate is the part of the grill that the food is placed on. It is the only part of the grill that comes in direct contact with the food.

What is the difference between grill and Grille?

Grill: a grated metal cooking utensil (noun); to cook over direct heat (verb). Grille: a network of metal, wooden, or plastic bars that acts as a barrier or screen.

What is a grill door?

A grille or grill (French word from Latin craticula, small grill) is an opening of several slits side-by-side in a wall, metal sheet or another barrier, usually to allow air or water to enter and/or leave and prevent larger objects (such as animals) from going in or out.

What is grill in metal?

A grille is a framework of metal bars or wire which is placed in front of a window or a piece of machinery, in order to protect it or to protect people.

Why do venturi grills clog?

The environment surrounding your grill can have a great effect on the venturi burner system. Often insects and dirt are attracted to the tubes, and both can clog the small openings that allow air to flow into the tube. If the tubes get too clogged, they can become a safety hazard. Tubes have exploded in the past because of clogs and the changes in pressure in the tubes. You don't want to have clogged tubes for cooking reasons as well. Clogged tubes can distort the level of heat that you think you are sending to the grill, changing the level that the grill's burners actually receive. With new tubes, you will be able to properly control the temperature, turning up the heat when you need it and cooling it down when you want to slow cook your food.

How does a grill get clogged?

During rough storms, water can find its way into even the covered parts of the grill. During wind storms , dirt and other debris can pelt the grill and get clogged in important grill parts. The venturi tubes are particularly susceptible to dirt and insects clogging the small holes in the tube that allows air to mix with gas in gas grills. In some cases, if they get clogged, the tubes can even explode, causing a very dangerous situation. Grill cleaning not only keeps your grill looking good, but it can keep you safe as well.

What type of burner is used in a Solaire grill?

Traditional Blue Flame Burner Infrared Burners in a Solaire Grill

Why do you need a grates on a grill?

If you cook smaller foods like pepper or mushrooms on the grill, you will want grates that have few open spaces because these grates prevent smaller foods from falling into the fire. Grates can also leave great grill marks on meats when you let them get hot enough to sear the meat.

What is a gas grill burner?

Gas grill burners are the heart beat of the grill and part of the cooking system. They allow gas (natural or propane) to enter at one end and then allowing it to escape. Typically burners are lined with tiny pin-size holes along an edge which is where the gas “escapes”.

Why does my grill make a mess?

If you have had your barbeque for a while, you have probably noticed that the grease and fat from the meat you cook can make a mess on the different grill parts. Over time, the grates that you use to cook the meat can become encased with debris from cooking, even if you habitually clean and oil the grates.

How do barbecue burners work?

Burners distribute heat/flames across a barbecues cooking surface by delivering gas via tiny openings that allow gas to escape. Burners, are the heartbeat of the grill, they quite literally “Bring the Heat”. Regardless of what material your burners are made from, odds are they will eventually wear down, and need replacing.

What is a side burner?

Side burners are built in to the side shelves of some grills and are great for preparing side dishes and sauces , allowing for the whole meal to be prepared on the grill.

What is an ignition source for a grill?

Igniters are the ignition source for your grill. If your igniter is not working check that the battery is good and that the electrodes are connected and not damaged.

What is a cooking grate?

Cooking Grate: Cooking grates are the workhorse of your grill. They are exposed to the most wear and tear of any part on your barbecue and for that reason require regular care and maintenance such as cleaning and seasoning.

Why use a warming rack on a grill?

The warming rack helps to keep cooked food warm while freeing up space for more food to be cooked on the grill. It’s also great for warming buns.

Is a gas grill a complex machine?

Every gas grill will look slightly different, but gas grills generaly aren’t very complex machines. Understanding the function of the key components of your barbecue will help you to take better care of your grill, extending its lifetime and saving you money in the long run.

What are the parts of a gas grill?

What are the parts of a gas bbq grill? Unlike a charcoal grill, gas BBQs have a lot more options depending on size, the number of burners, and accessories like hot plates and sink areas. A gas BBQ grill’s cooking area consists of a cooking grate on a lower shelf with a warming rack above it.

What is a BBQ regulator?

A BBQ regulator controls gas flow from your propane tank to the grill. It basically reduces high pressurised gas to the lower pressure pipes and burners on the bbq.

Why replace a bbq grill?

Spare bbq grills are a popular and inexpensive item. You might want to replace them because of bending or sudden shock damage or simply because they’ve become rusted. Outdoor grill racks & attachments are, thankfully, easy to come by.

What are the parts needed for a bbq?

One of the most fiddly bbq spare parts you might find yourself need are venturi tubes and clips. V enturi tubes are tubes that extend from the burner to the control valves. These have openings at the ends to allow air to mix with the gas as it leaves the control valve.

What is drip tray?

Drip Trays. Like an ash catcher on a charcoal grill, a drip tray deals with everything that falls to the bottom of a bbq. In gas bbqs, this means fat and grease. Whilst most b arbecue parts like drip trays are designed to be removed and clean, you may find yourself wanting to replace it after years of use.

How to fix a grill that is not getting hot?

If your grill isn’t getting hot or flames are flickering and dying – it may be in low-flow safety mode. If so, close the tank valve, turn off the knobs, detach the regulator, and turn the knobs to high. Wait for 1 minute, shut off the knobs, and reconnect the regulator. Then slowly open your valve.

When to replace gas burners?

Check first for kinks and leaks at your connection point. Otherwise, replace if the leak is in the gas hose.

How to search for a grill brand?

How to Search by Grill Brand: If you don't have a part number, but know your grill brand, click on your brand in the box below. This will take you to the brand parts page for your grill with all the information we have including illustrations or photographs with part numbers, prices, descriptions and measurements. Some parts lists by model number are sometimes available there. If your brand is not listed in the large box below, please use the drop down brand list in the small box immediately following to find and click your brand.

How to order bbq parts?

How To Order: All orders are placed through our website: bbqparts.com. Please use our online brand shopping carts for efficient order processing. To maintain accounting and shipping accuracy, we do not combine orders or change quantities or change parts ordered after the shopping cart is closed out. If you need to change or cancel, let us know as soon as possible and we will do out best to catch the order before shipping.

How many letters are in MHP?

If you have the Modern Home Products (MHP) replacement part number from the web for the part you need, (usually a combination of 3 to 5 letters and 1 to 3 numerals, for example DCSU1) enter that in the box below.

Is propane dangerous for grills?

Copyright © 1997- 2021, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.