What are the Fundamental TIG Torch parts and components ?
- Tungsten electrode. Tungsten electrode is a secret weapon used in TIG Welding. ...
- Gas nozzle. Gas nozzle (or gas cup) is mounted at the head of the torch, used to feed shielding gas to the welding area.
- Collet body. A collet body (located inside the white dot area) helps complete the electrical connection. ...
- Torch handle. ...
- Electrode Collet. ...
- Back cap. ...
Full Answer
What are the spare parts of a TIG welding torch?
Spare Parts of a TIG Welding Torch 1 TIG Welding Torch Components 2 TIG Torch Body / Head. The torch body is usually covered by a rigid phenolic material or a rubberised covering. ... 3 Collet Body. The TIG collet body screws into the torch body. ... 4 Gas Lens Body. A gas lens is a device that can be used in place of the normal collet body. ...
What size Tig torch do I Need?
A medium back cap: fits with longer tungsten electrodes (up to 3 inches). A long back cap: is most preferred by fabricators, as it can go with very long tungsten electrodes (up to 7 inches). To keep things simple, there are only 2 types of TIG torches: Air-cooled (or gas-cooled) torch and Water-cooled (or Coolant-cooled) torch.
What is the size of the collet body of the torch?
Collet body in 1.6mm size. Binzel part number 701.0191 10N31 compatible with all tig torch heads numbered 17, 18 and 26. Sold individually. Collet body in 2.4mm size. Binzel part number 701.0196 10N32 compatible with all tig torch heads numbered 17, 18 and 26. Sold individually. Collet body in 3.2mm size.
What are the different types of torch?
Our range covers torch types ranging from 9,9V,9F, 17,17V,17F,18,18V,18F,20,20V,20F,26,26V,26F. Gas lens insulator used to adapt #17,18,26 tig torch heads to a gas lens nozzle.
What are all the parts of a TIG torch?
Parts of a TIG Welding TorchRigid Torch Body.Flexible Torch Body (Optional)Torch Body with Argon Valve (Optional)Short Back Cap (Optional)Medium Back Cap (Optional)Long Back Cap.Back Cap 'O' Ring.Collet.More items...
What are the parts of welding torch?
Parts of a Welding TorchTorch Body (Or Handle)Two Separate Gas Tubes (Through the Handle Connected to the Hoses)Separate Control Valves.Mixer Chamber.Flame Tube.Welding Tip.
What are the parts of a TIG welder?
TIG welding gun partsTorch body/head.Collet body.Collet.Gas lens body.Ceramic cup.Tungsten welding electrodes.Back cap.
What are the two types of TIG torches?
Types Of TIG Torches – Welding BreakdownAir Cooled TIG Torches.Water Cooled TIG Torches.Air Cooled Torch Models.Water Cooled Torch Models.Torch Heads.Valves.Amperage Control. Wrap Up.
What are the parts of MIG torch?
Parts of a MIG Welding GunSwan Neck.Insulating Washer.Diffuser.Tip Adaptor.Nozzle/Shroud.Contact Tip.Liner.Switch/Handle/Cable Support.More items...
How many types of welding torches are there?
two typesOne can distinguish between two types of welding torches: injector torches for low pressure acetylene and medium pressure torches for high pressure acetylene. Figure 2.3. Gas welding torch.
How do you assemble a TIG torch?
2:507:45TFS: How to Assemble a TIG Torch with Side by Side - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide it up through the collet in the collet body now. As you put the tungsten in there make sureMoreSlide it up through the collet in the collet body now. As you put the tungsten in there make sure you leave plenty enough to stick out and then give it just a little bit of a snug with the back cap.
How does a TIG welding torch work?
2:273:59What is TIG Welding? (GTAW) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd sometimes helium or other gases keeps the molten metal from reacting with oxygen. Water vapor inMoreAnd sometimes helium or other gases keeps the molten metal from reacting with oxygen. Water vapor in the atmosphere.
What is TIG welding torch?
Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. The weld area and electrode are protected from oxidation or other atmospheric contamination by an inert shielding gas (argon or helium).
How long does a TIG torch last?
For starters there are more parts, more coordination needed, “special” (100% Argon) Shielding Gas, more expensive consumables, etc. We decided to give a run down of how long your TIG parts and consumables will last. TIG Torch- The Torch itself should last many years if used correctly and no accidents occur.
Do I need water cooled TIG torch?
There are small and large torch sizes to consider first. A larger torch with a lot of power will need to be water cooled if you want to weld for any length of time, while a smaller torch can be air or water cooled.
What is the difference between a 17 and 26 TIG torch?
the 26 torches are usually 200 amp and the 17 is usually 150 amp. These are pretty big torches , like almost as big as a chipping hammer.
What are the parts of oxy acetylene?
The basic oxyacetylene torch comprises: torch body (or handle) two separate gas tubes (through the handle connected to the hoses) separate control valves.
What is the function of welding torch?
A welding torch is used in an automatic welding system to direct the welding electrode into the arc, to conduct welding power to the electrode, and to provide shielding of the arc area.
What is torch welding called?
Oxyacetylene weldingOxyacetylene welding, commonly referred to as gas welding, is a process which relies on combustion of oxygen and acetylene. When mixed together in correct proportions within a hand-held torch or blowpipe, a relatively hot flame is produced with a temperature of about 3,200 deg.
How does a welding torch work?
When cutting, the metal is first heated by the flame until it is cherry red. Once this temperature is attained, oxygen is supplied to the heated parts by pressing the oxygen-blast trigger. This oxygen reacts with the metal, producing more heat and forming an oxide which is then blasted out of the cut.
1. What is the best TIG torch ?
If you are looking for the most suitable for your project, you should checkout top reviews and recommendations from famous brands, such as welding...
2. What are the parts of a TIG torch?
TIG Torch parts include six following basic items: (1) Tungsten electrode; (2) Gas nozzle; (3) Collet body; (4) Torch handle; (5) Electrode collet;...
3. What is a water cooled TIG torch?
Water-cooled torch uses water (obviously) to refresh the torch instantly when it gets too hot. Thus, it helps reduce cool-down time, and is capable...
4. How to hold a tig torch?
How to hold a TIG torch depends on the welding project. If it is very low amps, you may choke up on the torch with a few fingers on the cup for con...
5. How does a tig torch work?
A TIG torch generates arcs, which in turns produces heat to melt a filler rod onto the metalwork, eventually forming a weld.
6. What size tig torch do i have?
There are 6 TIG torch families relating to 6 different sizes: #24, #9, #17, #26, #20, #18. Among them, the only pairs that you can switch freely ar...
7. How to set up tig torch?
Firstly, put the Electrode collet into the Collet body. Then, adjust the back cap all the way out, to make sure you can install the Collet body - E...
8. What is a TIG torch ?
TIG Torch is the equipment directing the tungsten electrode into the arc, conducting power to the electrode, and providing shielding to the arc area.
9. Do I need a water cooled TIG torch ?
The answer depends on your budget and your job requirement. Water-cooled TIG torch is suitable for complex job that requires high welding current....
How big is a tig torch?
TIG torches have different sizes, the smallest being 9 and the largest being 26. The more sophisticated ones also have a gas- or water-cooling feature, which keeps the thin TIG torch at even temperatures so that you can weld for prolonged periods.
How does voltage affect a tig torch?
The voltage that a machine can handle will affect the maximum amperage it can produce. Thus, this affects how your TIG torch welds look in varying metal thicknesses.
What is the purpose of O rings in welding?
The role of the O rings on TIG welding is crucial as it prevents gas wastage and keeps the flow concentrated on the tip of the torch where the arc is, thus maximizing its shielding function and reducing costs.
Why is tungsten important for welding?
The tungsten's stability is important because of the demand for high accuracy and finer weld of the TIG welding process. The collet fulfills this role by acting as a stabilizer that surrounds the tungsten rod holding it in place, making sure there is no open space when the rod is inserted into the insulator.
Why is a tig welding process different from other welding processes?
The TIG method of welding is distinct from other welding processes because of its welding torch. The TIG torch is smaller than most welding torches, and TIG welding small parts such as the tungsten rod, gas lens, and collets separate it from other welding processes.
What is the role of a shield cup in a tungsten torch?
The shield cup's role in the TIG torch is to enclose the tungsten rod and let the gas envelop it , thereby “shielding” the rod and the arc from outside elements. It directs the gas toward the workpiece, ensuring that it is shielded to yield a clean and smooth metal weld.
What is the body of a welding torch?
The body is the part that holds everything together and is the largest part of the welding torch.
What size back cap for tig torches?
A medium length back cap to suit tig torches that are #17,#18,#26. These medium tig torch back caps are ideal for spots where a torch access is limited.
What tig head fits a #7?
9 Series Tig Torch Head suitable for fitting to any #9 or #7 Tig Torch. This #9 Tig Head is rigid.
What size are metalmaster tungsten collets?
A 3 pack of collets in 1.6mm size. These quality Metalmaster Tig Torch collets are used when Tig Welding with 1.6mm tungsten electrodes and are compatible...
What is a 45V26A?
This gas lens 45V26A is suitable for all #17, #18, #26 series tig torch heads. This quality Metalmaster 45V26 gas lens enables smooth dispersion of the shielding gas used in the tig welding process. This package contains 1 x 45V26 tig welding gas lens.
What is a tig torch?
The TIG welding torch is a critical part of the TIG process. It is the point at which the arc is created and whilst the majority of heat goes into the arc the TIG welding torch is subjected to high heat levels. As the TIG torch is held by the operator it must remain cool whilst still being easily manoeuvrable and compact in size.
How does a water cooled torch work?
Water-cooled TIG torches are designed so that water is circulated through the torch cooling it and the power cable . The power cable is contained inside a hose and the water returning from the torch flows around the power cable providing the necessary cooling.
What is a tungsten welding collet?
Collet. The tungsten welding electrode is held in the TIG welding torch by the collet. The collet is usually made of copper or a copper alloy. The collet’s grip on the electrode is secured when the torch back cap is tightened in place. Good electrical contact between the collet and tungsten electrode is essential for good current transfer.
What are gas cups made of?
Gas cups are made of various types of heat resistant materials in different shapes, diameters and lengths. The cups are either screwed onto the collet body or gas lens body or in some cases pushed in place. Cups can be made of ceramic, metal, metal-jacketed ceramic, glass or other materials. Ceramic is the most popular but can be easily broken.
Is Jasic a water cooled torch?
Jasic Water-Cooled TIG Welding Torch. Air/Gas cooled TIG torches require no additional cooling other than the surrounding air and gas flow. Higher current air cooled TIG torches are often larger and less flexible to use than water-cooled torches. The cable carrying the welding current must be heavier than the cable in water-cooled torches.
Do tig torches need to be water cooled?
Where TIG torches are required for high production or use high amperage then these would normally be water cooled and where lower amperage or lighter duty welding is required these would normally be air cooled.
Can a tig welding torch melt?
melt or possibly the power cable will melt. Always check the flow rate required to cool the TIG welding torch.
How many amps does a Weldcraft torch use?
Genuine Weldcraft™ water-cooled TIG torches and accessories for light to heavy duty TIG welding applications up to 400 amps.
What is a 301311 tig?
Miller® 301311 TIG/Stick Contractor Kit with RCCS-14 remote fingertip control is a 150 amp, ALL-IN-ONE air-cooled TIG/Stick welding accessory kit for your Miller TIG welder equipped with a 14-pin receptacle.
What is a Miller 235/255 TIG?
Miller® Multimatic® 235/255 TIG Kit with foot control provides everything you need for remote TIG welding with Multimatic™ 235 and 255 multiprocess welders.
