what are the safety precautions associated with portable tools

What are the most important safety rules for portable power tools?

• Keep floors dry and clean to avoid slipping while working with or around dangerous tools.
• Keep cords from presenting a tripping hazard.
• Never carry a power tool by its cord.
• Use tools that are double-insulated or have a three-pronged cord and are plugged into a grounded receptacle.

Full Answer

What are the safety precautions for portable electrical power tools?

101.1 State the safety precautions for portable electrical power tools. •Ensure all personnel are trained in usage, hazards, and safety precautions. Include in the training how to recognize symptoms of electrical shock and electrical shock trauma as well as emergency first-aid responder techniques.

What are the precautions to be taken while using hand tools?

Hand Tools : A tool held in the hand and operated without electricity or other energy. The tools like hammer, chisel, screw driver, shovel, Pickaxe is comes under hand tools. Slipping while using. Falling from height. While climbing ladder carrying tools in hand. Inspection should be done before use. Always keep clean. Always keep tools in box.

What should I wear when using power tools and hand tools?

Appropriate personal protective equipment, such as safety goggles or gloves, should be worn for protection from potential hazards that may be encountered while using portable power tools and hand tools. Hand tools are non-powered and include everything from axes to wrenches.

Are power tools hazardous?

Power tools are hazardous when improperly used. There are several types of power tools, usually categorized according to the power source (electric, pneumatic, liquid fuel, hydraulic, steam and explosive powder actuated). Employees should be qualified or trained in the use of all power tools used in their work.

Why are power tools dangerous?

How many volts should a hand tool be?

What is required to be installed on an air supply valve?

What are pneumatic tools?

What is the best way to hold a tool?

How to make cutting tools cut faster?

What happens if a bit is long enough to pass through material?

See 2 more

What are some safety precautions for tools?

10 Basic Safety Rules For Using Hand ToolsInspect regularly. Regularly inspect your tools to make sure that they are in good condition.Wear gloves. ... Carry with care. ... Don't pocket sharp objects. ... Be aware of your surroundings. ... Use the right tools. ... Follow instructions. ... Clean and return.More items...•

What are the precautions in using hand tools and power tools in electrical and electronics?

What should you avoid when using powered tools?Do not wear gloves, loose clothing or jewelry while using revolving power tools. ... Do not use a tool unless you have been trained to use it safely and know its limitations and hazards.Avoid accidental starting by ensuring the tool is turned off before you plug it in.More items...

What are four hazards of using portable power tools?

Power tools create hazards such as noise, vibration, electrical, moving parts and projectiles.

What safety precautions do you advise to avoid these unsafe measures?

General PrecautionsYour safety is your personal responsibility.Always follow the correct procedures.Never take shortcuts.Take responsibility and clean up if you made a mess.Clean and organize your workspace.Ensure a clear and easy route to emergency exits and equipment.Be alert and awake on the job.More items...

What is the purpose in following the safety precautions in using the electrical power tools?

Many power tools with blades must have safety devices that allow the user to shut the tool off in a single motion. One of the most serious workplace injuries involving tools is electrical shock from power tools. Electrical shocks can cause heart failure and burns.

What are the things that you need to consider when working with the hand and power tools?

Here are 10 quick and easy tips for safely working with hand and power tools.Inspect your tools. Never issue or use a damaged or defective hand or power tool. ... Pick the right tool. ... Wear your PPE. ... Don't alter your tools. ... Handle with care. ... Keep your distance. ... Pick up after yourself. ... Unplug and disconnect.More items...•

Which of the following basic safety rules should you not follow when using hand and power tools?

Never carry a tool by the cord or hose. Never yank the cord or hose to disconnect it from the receptacle. Keep cords and hoses away from heat, oil and sharp edges. Disconnect tools when not using them, before servicing and cleaning them, and when changing accessories such as blades, bits and cutters.

What should you do before using power tools and while using it?

Safety Precautions to Take Before Using Power ToolsRead the instruction manuals and warning. Power tools come with safety information that is relevant to the handling of the equipment. ... Invest in and use safety gear. ... Inspect the tools for disrepair. ... Clean and properly mark the work space.

10 safety tips when handling hand and power tools

Its is really cool blog i found on internet today love to read these kind of blog that has lot of information here i deeply found the right information about handling the hands and power tool. i am not a professional handyman but using tools an handle them is my passion i love using the tools but here i got the the right information here about the tools that i needy from last many years.

Hand and Portable Power Tool Safety

Tools are such a common part of our lives that it is sometimes difficult to remember that they may pose hazards. All tools are manufactured with safety in mind, but occasionally an accident may occur before tool-related hazards are recognized.

ILO Content Manager

" DISCLAIMER: The ILO does not take responsibility for content presented on this web portal that is presented in any language other than English, which is the language used for the initial production and peer-review of original content. Certain statistics have not been updated since the production of the 4th edition of the Encyclopaedia (1998)."

Hazards of Hand Tools

Hand tools are tools that are powered manually. Hand tools include anything from axes to wrenches. The greatest hazards posed by hand tools result from misuse and improper maintenance. Some examples include the following:

Electric Tools

Employees using electric tools must be aware of several dangers. Among the most serious hazards are electrical burns and shocks. Electrical shocks, which can lead to injuries such as heart failure and burns, are among the major hazards associated with electric-powered tools.

Portable Abrasive Wheel Tools

Portable abrasive grinding, cutting, polishing, and wire buffing wheels create special safety problems because they may throw off flying fragments.

Pneumatic Tools

Pneumatic tools are powered by compressed air and include chippers, drills, hammers, and sanders. There are several dangers associated with the use of pneumatic tools.

Liquid Fuel Tools

Fuel-powered tools are usually operated with gasoline. The most serious hazard associated with the use of fuel-powered tools comes from fuel vapors that can burn or explode and also give off dangerous exhaust fumes.

Powder-Actuated Tools

Powder-actuated tools operate like a loaded gun and must be treated with extreme caution. In fact, they are so dangerous that they must be operated only by specially trained employees.

Hydraulic Power Tools

The fluid used in hydraulic power tools must be an approved fire-resistant fluid and must retain its operating characteristics at the most extreme temperatures to which it will be exposed.

What to do if a tool is damaged?

If a tool is found to be damaged or defective, immediately remove it and clearly label it with a tag reading “Do not use.”. Avoid accidental starting. Do not place fingers on the switch button when carrying a plugged-in tool. Never carry a tool by the cord or hose, or yank the cord to disconnect it.

What can get caught in a tool?

Loose clothing, jewelry and ties can get caught in a tool’s moving parts. Disconnect tool from energy source and compressed air (when in use) before performing repairs or maintenance, and before replacing bits, blades and cutters.

Is it safe to use portable power tools at home?

Reprints. Power tool safety. Unsafe habits can develop from using portable power tools at home, and these habits can creep into the workplace, according to California OSHA. Such equipment may be commonplace, but that does not reduce the potential danger.

What happens if you don't adjust your equipment?

If not, they could cause injury, or damage the equipment being repaired or adjusted.

What is the danger of hacksaws?

The chief danger in the use of a hacksaw is injuring the hand when a blade break. Breaking is caused by one of following two things:

How to push a scraper over a work?

Hold the blade of scraper firmly in one hand using the other hand to push the scraper over the work.

What is a single handle tool?

Single-handle tools for power tasks: A tool with a handle diameter in the range of 1 ¼ inches to 2 inches.

What are spark resistant tools made of?

Where this hazard exists, spark-resistant tools made from brass, plastic, aluminum, or wood will provide for safety.

Why not crowd a saw through a cut?

Do not crowd or force a saw through the cut because the saw may buckle or fly out.

What to do if you have a stroke and it is not possible?

If it is not possible, keep your body clear off the stroke and wear protective clothing.

When to use non sparking wrenches?

Always use non-sparking wrenches when in the presence of flammable vapors or dusts.

What are spark resistant tools made of?

Where this hazard exists, spark-resistant tools made from brass, plastic, aluminum, or wood shall be used.

What to watch for when using a hammer?

Have an unobstructed swing when using a hammer and watch for overhead interference.

What to wear when using a chisel?

Always wear safety goggles or a face shield when using a chisel.

Can you use a screwdriver on electrical equipment?

Most screwdrivers are not designed to be used on electrical equipment. Use an insulated screwdriver.

What is a portable hydraulic access and rescue system?

The portable hydraulic access and rescue system (PHARS) is designed to be used by damage control personnel for providing access to damaged or burning compartments.

What is the real danger of a Halon 1301/HFP?

The real hazard of HALON 1301/HFP FM200/HFP lies in the products of combustion from the fire. Combustion products such as CO, combined with the oxygen depletion, heat, and smoke pose a greater hazard to personnel. Personnel should not remain in a space where HALON 1301/HFP FM200/HFP has been released to extinguish a fire unless a self-contained breathing apparatus (SCBA) is worn. Additionally, personnel must be aware that there is a 30-second discharge delay time to allow for evacuation from the space and time for ventilation fans to shut down.

When securing the sound-powered telephone, it is important to replace the jackbox cap.?

When securing the sound-powered telephone, it is important to replace the jackbox cap. Failure to do so may result in dampness, dirt and foreign matter to get inside and short out the jackbox locally or ship-wide or prevent tight connections and degrade signals transmitted or received. (101.22)

Can you operate an internal combustion engine without the exhaust hose?

Carbon monoxide is odorless and poisonous and can cause injury or death when inhaled. Do not operate internal combustion engines in an enclosed area without the engine exhaust hose connected and routed safely into the outside skin of ship. (101.14).

Is a PECU a fire hazard?

When operating the PECU be aware that the fumes are toxic and require adequate ventilation. When the cutting rod is ignited, a fire hazard exists. The oxygen cylinder can also be a hazard; oxygen under pressure combined with oil or grease may explode.

What are the hazards of using portable power tools?

Employees who use portable power tools may potentially be exposed to the hazards of falling, flying, abrasive, and splashing objects, and to harmful dusts, fumes, mists, vapors, or gases. They must be provided with the appropriate personal protective equipment. All electrical connections for these tools must be suitable for the type of tool and the working conditions (e.g., wet, dusty, flammable vapors). When a temporary power source is used for construction, a ground-fault circuit interrupter should be used.

What are the hazards of power tools?

Some of the potential hazards of power tools include electric shock, which is specific to electric powered tools, while other hazards such as moving parts are general to all power tools.

What is the proper personal protective equipment required for employees?

Employees who use hand and power tools and who are exposed to the hazards of falling, flying, abrasive and splashing objects, or exposed to harmful dusts, fumes, mists, vapors, or gases, must be provided with the proper personal protective equipment necessary to protect them from the hazard.

What is effective dissemination of safety information?

Effective dissemination of safety information is an integral part of the Injury and Illness Prevention Program. This document was created to facilitate worker safety training. Training must be completed before the use of any tool or piece of equipment, exposure to any hazardous conditions, and/or when new hazards are identified.

Why are power tools dangerous?

Power tools have inherent risk because of its extreme mobility. It can easily come in contact with operator’s body. At the same time it is difficult to guard such equipment completely.

How many volts should a hand tool be?

In wet locations such as in tanks and boiler or on wet floors, low voltage hand tools up to 24 volts are recommended. Additional precautions such as rubber mat and rubber gloves shall be

What is required to be installed on an air supply valve?

Air hoses shall be coupled, locked and secured from undesired movement before opening air supply valve. A safety clip or retainer must be installed to prevent attachments such as chisels on a chipping hammer from being ejected during tool

What are pneumatic tools?

Pneumatic tools are powered by compressed air and include chippers, drills, hammers, and sanders. There are several dangers associated with the use of pneumatic tools. First and foremost is the danger of getting hit by one of the tool’s attachments or by some kind of fastener the user is using with the

What is the best way to hold a tool?

Use clamps, a vice or other devices to hold and support the piece being worked on, when practical to do so. This will allow user to use both hands for better control of the tool and will help prevent injuries if a tool jams or binds in a work piece.

How to make cutting tools cut faster?

Avoid excessive force to make cutting tools cut faster. Feed material only as fast as the tool is designed to accept to prevent excessive wear and decreased control.

What happens if a bit is long enough to pass through material?

If bit is long enough to pass through material, protection against damage to property and injury to personnel must be provided at the far end.