What are the safety rules for parking the lift truck?
- Select an area to park. Do not park in an unauthorized area. Do not block an aisle or exits. Follow your company's parking procedures.
- Apply brake slowly and stop.
- Neutralize the controls.
- Set the parking brake.
- Turn off the ignition.
- If the truck is parked on an incline, block the wheels.
- Always try to find a level surface to park on. ...
- Lower forks, or the forklift attachment, all the way to the ground. ...
- Put the gear into neutral.
- Make sure the wheels are straight. ...
- Set the parking brake every time you park the forklift. ...
- Turn off the engine before dismounting the forklift.
How to maintain the safety of the lift truck?
What are the safety rules for parking the lift truck? Select an area to park. Do not parkin an unauthorized area. Do not block an aisle or exits. Follow your company's parking procedures. Apply brake slowly and stop. Neutralize the controls. Set the parkingbrake. Turn off the ignition. If the truckis parkedon an incline, block the wheels.
How to Park a forklift safely?
Apr 30, 2021 · Do not park at an incline, unless the forklift’s wheels are blocked. Park in an area designated for forklifts. Ensure a forklift is parked away from fire equipment, stairways, and aisles and does not block traffic. Use the parking brake. …
How to use the parking brake on a lift truck?
Make people stand back, even if the lift truck is stopped. Pedestrians may not understand that the lift truck has rear steering and there are visibility restrictions. If the view is blocked because of the load, travel backwards. If the lift truck must move forward, make sure that people are out of the way and move the lift truck slowly. Use a
What are the rules for driving a forklift on railroad tracks?
Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. Set the parking brake and set the directional control to neutral. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.
When parking a lift truck you should?
When parking a forklift, the operator should lower the forks to the floor. The operator should also verify that the forks are touching the ground before he or she leaves the lift. And, the operator should engage their lift's emergency brake.Apr 30, 2021
When parking a lift truck the forks should be raised off the ground?
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.
What is the most important safety feature on a lift truck?
Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. If the brakes malfunction, accidents are unavoidable. At the beginning of each shift, operators are required by law to complete a full safety inspection.Oct 10, 2018
How should the forklift blades be when parked?
Forks should always be in the tilted downward position when parked. The best way to achieve this is for the operator to tilt them forward before lowering them to the ground.
What should you not do when you park your lift truck?
Maintain a safe working limit from all overhead power lines. Do not turn on ramps. Do not elevate the load when the forklift truck is on an incline. Do not allow riders, unless a safe place for the rider has been povided by the truck's manufacturer.
When leaving the lift truck unattended the forks must be placed?
In addition, an unattended powered industrial truck is mentioned in rule 4081.2174, Parking (1) When leaving a powered industrial truck unattended, an operator shall fully lower the forks flat to the floor, neutralize the controls, set the brakes and shut the power off.
What do the front wheels of a lift truck serve as?
The front wheels of a lift truck serve as the Fulcrum Point between the weight of the truck and the weight of the load being carried. If the weight of the load is equal to the weight of the truck, with equal distances between the centers of gravity, it is possible to "seesaw" a lift truck on its front wheels.
Can you drive a lift truck over any type of surface?
Do not travel over surface that cannot support the weight of the lift truck, its load and its operator.
What safety gear should you look for when visually inspecting your forklift?
Seatbelt and/or operator restraint device (if equipped) – belts and restraints work properly; no visible wear or damage; anchors, buckles, etc.
Where can you not park a forklift truck?
Do not park an industrial lift truck near doorways, switches and electricity boards, fire fighting equipment, blind corners, on inclines, on soft ground, middle of an aisle, fire exits or pedestrian walk ways.
What are the OSHA regulations for forklift?
OSHA 29 CFR 1910.178(I) requires that employers provide forklift operators training for vehicle inspection and maintenance. Operators must be over 18 years of age and be recertified at least once every three years. The similar CSA standard is B335-04 (R2012).
Can a forklift be left unattended?
When a powered industrial truck is left unattended, load-engaging means shall be fully lowered, controls neutralized and brakes set. Unless the truck is in view and within 25 feet (7.62 m) of the operator, power shall be shut off. Wheels shall be blocked or curbed if the truck is on an incline.
Why are forklifts important?
Forklifts play a very important function to make the work much easier in the warehouse and in places where they are utilized. They make the transfer of goods and materials very quickly. But despite of their good reputation, they create a potential hazard when the operator parks or leaves it in an undesignated location.
When to apply parking brake?
Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment. The emergency brake of the vehicle should be engaged so that it would be firm resting on its position.
Can a forklift cause injury?
Forklifts can cause damage to property, injury and even death if it is operated by an untrained individual. One circumstance of it is when parking or leaving the forklift, the operator should do the following as mentioned above. Parking the forklift and leaving it for a period of time in an undesignated area create danger and risk.
What does "chok the wheels" mean?
attempt to turn on or travel across a ramp or a slope;leave a lift truck on a gradient except in an emergency, in which case always chock the wheels.
Where can I find HSE guidance?
For information about health and safety, or to report inconsistencies or inaccuracies in this guidance, visit www.hse.gov.uk. You can view HSE guidance online and order priced publications from the website. HSE priced publications are also available from bookshops.