A transit bolt, also called a washer shipping bolt, is installed through the back a washing machine to keep the tub from moving around during shipping.
Can I safely remove the transit bolts from my washing machine?
A great video from Indesit demonstrating exactly how to safely remove the transit bolts from appliances such as your washing machine or tumble dryer. The transit bolts are there to hold the drum in place during transport. When you get a new appliance, you must remove them before using it or it can damage the machine.
What is the purpose of transit bolts?
The transit bolts stop the springs and dampeners from moving while the machine is in transit. This is because the machine being in a moving van can cause excessive motion in the springs which could damage the machine. If these are locked in place while being used then they won’t be able to soak up any machine vibrations.
What are transport bolts in a washing machine?
Transport bolts in the washing machine serve as a kind of fuses, protecting the insides from damage Transport costs often have to be incurred, and therefore knowledge of the need for transport bolts can always be useful. Transport bolts are elements intended for temporary fastening of parts in order to avoid damage to them during transportation.
What happens if you don’t remove transit bolts correctly?
If you do not remove the transit bolts correctly you risk damage to your washing machine, in some cases this can be considerable, to the point where you can comprehensively wreck your shiny new washing machine.
What happens if you leave transit bolts in washing machine?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
Do I need transit bolts for washing machine?
The 'spinny thing' she is referring to is the machine's drum that is held in place with transit bolts so it doesn't move and break during delivery. The bolts, located at the back of the machine, need to be removed before using as it can cause serious damage and even void the warranty.
What happens if I dont remove shipping bolts from washer?
The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could cause damage to the suspension. Before installing the washing machine, it is required that you remove all shipping bolts from the back of the unit.
Why do you remove transit bolts from washing machine?
Washing machines are almost always supplied with 'transit', 'shipping' or 'packaging' bolts to help prevent any damage to the inside of the washing machine during transit to your home. Failure to remove all these bolts before use causes the washing machine to make excessive noise or vibrate abnormally when in use.
What should I remove from a new washing machine?
0:041:23What are transit bolts? why are they there and what should I do with them?YouTubeStart of suggested clipEnd of suggested clipWhen you set up your new washer remember to remove the transit bolts from the rear of your applianceMoreWhen you set up your new washer remember to remove the transit bolts from the rear of your appliance.
How do I stabilize my washing machine drum?
Preventing a washing machine's drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.
Do top load washers have shipping bolts?
Of course it does. These are to be removed by the installer or whomever does the installation. The bolts are worth saving somewhere if you ever move, or if you sell the washer to someone else for them to move.
How do you remove shipping bolts from a washing machine?
0:562:14Front Load Washer Noisy - Shipping Bolt Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd operation use a wrench or socket to loosen the shipping bolts and remove by pulling them outMoreAnd operation use a wrench or socket to loosen the shipping bolts and remove by pulling them out from the washer. Be sure to remove both the plastic spacer and the shipping. Bolt.
How do you put transit bolts back in washing machine?
0:061:17Samsung Washer Shipping Bolt Replacement #DC97-14489AYouTubeStart of suggested clipEnd of suggested clipUse a 10 millimeter socket or the wrench provide it with the washer to tighten the bolt. You canMoreUse a 10 millimeter socket or the wrench provide it with the washer to tighten the bolt. You can secure the power cord under the retaining tab of each bolt.
How do I stabilize my washing machine for moving?
0:161:06How to Cheaply Stabilize a Washing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipMachine you only need to determine what size of bottle you'll need to buy drink. It up use it up andMoreMachine you only need to determine what size of bottle you'll need to buy drink. It up use it up and then just stick it behind your washing machine. It's not easy alright thanks for watching.
How do you move a washing machine by yourself?
Moving stage: How to move a washing machine by yourself [5 steps]Fasten the power cord. ... Pull out the washer completely. ... Pack the washing machines in blankets. ... Load the washer onto the appliance dolly. ... Load the washer into the moving truck.
Do Bosch washing machines have transit bolts?
All new washing machines are fitted with a transit bolts to protect the machine against damage in transit.
How do you transport a car washing machine?
The most important thing to remember when moving the machine is to keep it upright. This stops any residual water from getting into the machine's electrical wiring and damaging it. To keep it upright you can wrap the machine in a blanket or towel and tie it to a trolley, also known as a dolly.
Do top load washers have shipping bolts?
Of course it does. These are to be removed by the installer or whomever does the installation. The bolts are worth saving somewhere if you ever move, or if you sell the washer to someone else for them to move.
Are washing machine bolts universal?
The short answer is no, washing machine transit bolts are not always the same size. The reason for this is because different companies tend to use different sizes of bolts on their machines. One company that manufactures washing machines could use a 1/2″ bolt, while another company could use a 5/8″ bolt.
Do Bosch washing machines have transit bolts?
All new washing machines are fitted with a transit bolts to protect the machine against damage in transit.
How many transit bolts does a Samsung washing machine have?
This is a typical example shown below on a Samsung washing machine with three transit bolts fitted, one to the top and two to either side lower down.
Why do you need to put a transit bar on a washing machine?
Whenever you buy a new washing machine there are what is known as "transit bars" or "transit packaging" to stop the drum unit inside from moving about and banging off the insides of the outer cabinet. This packaging is essential to prevent damage to the washing machine whilst it is in transit ...
How to tell if a washing machine drum is moving?
Once the bolts are removed the drum should be able to freely move, you can check this easily by simply opening the door of the washing machine and gently trying to move the drum. If it sways and moves about then it is fine, if it is locked solid in place then there is some transit packing still in place preventing it from moving.
How many bolts does a washing machine have?
Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine.
What happens if you don't remove the transit bolts?
If you do not remove the transit bolts correctly you risk damage to your washing machine, in some cases this can be considerable, to the point where you can comprehensively wreck your shiny new washing machine. The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through ...
What does failure to remove transit bolts mean?
Failure to remove the transit bolts correctly, apart from the potential for damage, will mean that any fault or damage caused by failure to do this will almost inevitably not be covered under the manufacturer's warranty as it is not a failure of the machine, but a failure of the user or installer to install the machine correctly.
What happens when you put bolts on a washing machine?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed.
Why do washers have transit bolts?
The transit bolts normally lock the springs in a washing machine in place, these springs are designed to stop the washing machine from bouncing around when in use. If you leave these in and then your machine gets to a spin cycle it is likely to start bouncing around the room. What destruction it causes to the machine during this walkabout will generally come down to luck.
What happens if you leave a washing machine in for a while?
If you have somehow left them in for a while and not noticed the vibrations then more lasting damage could have been caused. The machine will have been shaking like mad which could have damaged countless internal parts. The only real way to know is to wait and see what happens to your washing machine.
Can you remove transit bolts before using a machine?
this obviously falls outside of any warranty. The manufacturer’s instructions will definitely tell you to remove the transit bolts before using the machine so you won’t be covered here, at all.
What is transit bolt?
Transit bolts are meant to prevent the washing drum for rotating, vibrating, moving while the machine is in transit or transport. These bolts must be removed once machine is installed and ready to be operated. One or more of the following can happen if you don’t:
Why do you need to remove transit bolts?
In transit on the vehicle, to avoid drum displacement due to vehicle inertia transit bolta are applied to lock the drums . Drum has two suspension springs & two shock absorbers so as to run the machine stable. So you need to remove transit bolts while taking in service.
Which is more economical, front load or top load washing machine?
Front Loading wa shing machines are most economical when it comes to saving water and it uses less water than Top Load washing machines.
Why do we need washing machines?
Washing Machines cleans our clothes and helps us to do our household chores. These machines have made our lives simple. But do you know how to maintaining your Washing Machine?
How much does a new washer cost?
A new washer will cost from $400 for the bottom of the line, to well over $1000. If you get eight years out of it your lucky. If you don’t have any repairs in the first three years your are even luckier.
What would happen if a bolt was called a permanent bolt?
If the bolts were called permanent bolts they would be left in situ, quite simple really.
When did Whirlpool stop making direct drive washers?
It did an excellent job getting clothes clean and it is also very easy to repair. Of course, they stopped making this direct drive in the early 2000’s. Most everyone that had one and decided to buy new instead of having it repaired, wished they had kept it.
Where are shipping bolts on a washing machine?
You can typically find shipping bolts in the back of the unit on a front load washing machine . There are usually 4 shipping bolts in place, but some manufacturers only install 2 shipping bolts. Not all washing machines have shipping bolts, and that includes top load washers which generally have none.
How to install shipping bolts on front load washer?
First insert the bottom left bolt, bottom right, then the top left and top right shipping bolts.
How to test the durability of a washing machine?
You can test the durability by shaking the washing machine and seeing how much leeway the blankets give . Ideally, you’ll have enough blankets to fill the drum without overstuffing it and damaging the inside.
How to move a front load washer without bolts?
Follow along as we dive into how to safely move a front load washer without shipping bolts. Step 1. Drain the Washer. You need to fully drain your front load washer before you can safely transport it. First, turn off the washing machine, unplug it from the outlet, and tape the cord to the top of the washer.
How to load washers on truck?
Load the washer onto the truck by walking into it backward for safety purposes. Once the washer is inside of the truck, make sure that it is standing up straight on an even surface, and strap it in. If you must move a washer without shipping bolts, take every precaution and do it safely.
Why do you walk in backwards when loading a washing machine?
When you load the washing machine into the truck, walk-in backward for safety purposes. That way, the washer won’t fall on you or anyone else if it happens to come loose from the dolly.
What is a trough sink?
Trough sinks in bathrooms have come into their own in recent times. The popularity of trough-style bathroom sinks has grown. In many new homes, a trough sink has replaced the double sink installation...
