Answer: Erosion control wattles are an extremely versatile product that has been used in a wide range of erosion and sediment control applications, including the following:
- Erosion Control Along Stream Banks
- In Low Flow Streams such as a Check Dam
- Along Construction Entrances for Sediment Control
- Curved Around Drains as a BMP
What are erosion control wattles used for on construction sites?
In addition to filtering out sediment on construction sites, the erosion control wattles are used as check dams in low flowing streams and as construction erosion control measures along banks. Every construction site has an erosion and sediment control plan to stay in compliance with local and federal regulations.
What are wattles and how do they work?
Wattles are materials designed and installed to control sediment at construction sites, thus preventing sediments from moving into waterbodies or waterways. Proper installation of wattles can reduce the rate of soil erosion, control sediment on site, reduce stormwater runoff velocity, and also promote water quality.
What is a straw wattle used for?
Straw Wattles are an excellent way to control sediment, erosion, and storm water runoff. Available in 9", 12" or 20" diameters, these straw wattles are able to effectively filter out sediment while still allowing water to flow into a storm drain.
How do you install straw wattles for erosion control?
Installation of Straw Wattles. Installation for the straw wattles typically involves the following procedures: Dig a small trench for the erosion control wattles (typically 2" to 5" in size). Place straw wattles in the trench and backfill with soil. Secure the straw wattles with stakes.
How effective are straw wattles?
Straw Wattles increase infiltration, add roughness, reduce erosion, and help retain eroded soil on the slope. Straw Wattles should be effective for a period of one to two years, providing short term protection on slopes where permanent vegetation will be established to provide long term erosion control.
How do you use wattle for erosion control?
Fit wattle in trench snugly up against the sidewalk or curb. Around storm drains or inlets, the wattle should be back 1–1½ ft. and should direct water flow toward the angle of drainage. If all drainage angles into the inlet, snake the wattle all the way around the inlet, using more than one wattle if needed.
How do wattles work?
They do a good job in catching water as it goes down the slope. Wattles can be made out of straw, and as time passes, it blends in with the soil and adds moisture. Wattles also work very similarly as erosion control blankets since they maintain ideal conditions for the soil below.
What is the most effective form of erosion control?
Erosion prevention practices, which mostly include soil preparation, vegetation, and the application of a mulch, blanket, mat, or other cover on bare soil, are the easiest, cheapest, and most effective approach for addressing runoff from construction sites.
Is straw wattle biodegradable?
Straw Erosion Control Wattles Product Details Because of their biodegradable nature, straw wattles are used for perimeter erosion control and to slow channel erosion.
How do you slow down the slope of water?
Divert or Slow Down Water Divert flow away from steep areas. A swale or berm along the top of a slope or diagonally across a slope can be used to divert runoff to a more stable area and prevent erosive flow down the slope.
How do erosion control mats work?
They work by trapping soil and sediment on the surface of the mat, which reduces the amount of material that can be carried away by wind or water.
What do erosion control blankets do?
Erosion control blankets (ECBs) are typically biodegradable, open-weave blankets that provide temporary cover and support for establishing vegetation on bare soil areas.
How do you control erosion?
For heavy erosion in areas of concentrated flow, the most effective solutions are check dams or terraces.Replant Vegetation Suited to Site Conditions. Well-established vegetation can stabilize the soil in cases of light erosion. ... Footpaths with Exposed Soil: Cover with Mulch or Gravel. ... Terraces. ... Build Check Dams.
How do you keep soil from washing away on a slope?
Techniques for steep slopes include wood retaining walls, interlocking concrete blocks, rock retaining walls, riprap (loose rock) areas, and terracing. If you choose wood, make sure the wood is treated with a wood preservative to prevent rotting.
How do you prevent erosion on a sloped yard?
Cover bare patches of soil, hill sides, and spaces between plants with 1 to 2 inches of mulch. This will protect soil from overhead watering and rain, keeping it in place. It also minimizing evaporation and feeding soil at the same time. Consider adding extra seed to cover ground and fill in bare patches in your lawn.
What are 3 methods of erosion control?
The 3 main principles to control erosion are to: use land according to its capability. protect the soil surface with some form of cover. control runoff before it develops into an erosive force.
What is a hay waddle?
INTRODUCTION. Straw wattles are an effective and economical alternative to silt fence and straw bales for sediment control and storm water runoff. Wattles are cylinders of recycled, compressed, 100% agricultural straw wrapped in tubular, UV-stabilized black synthetic netting.
What is a brush mattress?
A brush mattress is a layer (mattress) of interlaced live branches placed on a bank face, often with a live fascine and/or rock at the base. The live branches are cut from any adventitiously sprouting (sprouts roots from stems) woody plant, such as willow and some species of shrub dogwood and alder.
What are erosion control wattles used for?
In addition to filtering out sediment on construction sites, the erosion control wattles are used as check dams in low flowing streams and as construction erosion control measures along banks.
What is wattle used for?
Hills and Slopes ? Wattles are one of many sediment control products that can also be used for construction erosion control on hills or slopes around an uneven site, such as interstate ramp construction.
What is a coir wattle?
Answer: Coir Wattles are effective and environmentally-friendly construction site BMPs that control silt or sediment during your project. They are used around drains, dams, and other low flow areas to help filter sediment or silt out of the water.
Why do construction sites have erosion control?
Every construction site has an erosion and sediment control plan to stay in compliance with local and federal regulations. Sediment must be controlled around every part of the area that may lead to waterways and sewer systems.
How to contact sediment control?
Questions about sediment control products? We can help! Call our team at 1-863-270-8118 or fill out our quote request form to discuss your requirements.
Why are wattles used in erosion control?
Wattles are made from a range of different diameters to accommodate different slopes, requirements or water flows. For long erosion control areas, multiple wattles can be ...
What is erosion control wattle?
Erosion control wattles are used around construction sites, storm drains and low flow channels to filter and control stormwater runoff. Often implemented as a pollution control device, these wattles are made from all natural fibers such as coconut coir or straw. These materials are designed to filter out pollutants and then naturally biodegrade over time. This eliminates environmental concerns and removes the need for cleanup or disposal.
Can you join wattles together?
For long erosion control areas, multiple wattles can be joined together until the required length is formed. Contact Us. If you have questions about products, give us a call at 1-863-270-8118 or request a price quote.
What are erosion control wattles made of?
The standard erosion control wattles that we offer are products made from an all-natural coir material. This coir fiber is created from coconut husks and cured to help increase the strength offered by your product. Features include: 1 Inside Material: Double Cleaned Unsorted Coconut Fiber 2 Outer Material: High Strength Coir with Knotted Junctions 3 Mesh Openings: 2" x 2" Rhombic Shapes 4 Standard Diameters: 6" or 9" 5 Standard Lengths: 10' or 20'
Why are coir wattles used?
They have been used on construction sites to help direct the flow of water runoff or protect drains from sediment contamination.
How big is a coir wattle?
Features include: In terms of the information you have requested, the coir wattle is available in the standard diameters of either six or nine inches (6" or 9"). Choosing your coir diameter can depend on the area you are trying to control, as well as specific inlets or drains you may need to protect.
Can wattles be joined together?
Choosing your coir diameter can depend on the area you are trying to control, as well as specific inlets or drains you may need to protect. To achieve the extended length you have requested, wattles can be joined together using a coir twine material.
Why do we supply Wattles?
We supply a variety of wattles in order to provide options for fill, sock and size.
What is a straw wattle?
The Straw Wattle is filled with straw and wrapped in a photodegradable netting. The straw matrix filters sediment laden runoff in ditches, slopes and construction perimeters. Similar to the Curlex® Sediment Log®, the Straw Wattle is lightweight and has an open weave encasement netting.
What is erosion control log?
Wattles and erosion control logs trap sediment, control runoff and prevent erosion. Most erosion control wattles are filled with a natural material and are wrapped in a synthetic netting.
What is a travel lane wattle?
It has built-in handles for lifting and internal sandbags for weighted support. This wattle is a reusable option for slope interruption or inlet protection.
What is an Excelsior Log?
The Excelsior Log (aka the Curlex Sediment Log) is one of the industry’s most popular multi-functional wattles. These logs are filled with naturally strong aspen wood fibers. Excelsior Logs have a high flow capacity and filter nutrients from runoff at a very high rate. This 12″ x 10′ log is lightweight and biodegradable. Use the Excelsior Log for diversion dikes, slope interruption, and inlet protection.
What is erosion control?
Erosion control products are an essential part of any soil stabilization, reinforcement, or restoration project. Perfect for banks, slopes, hillsides, or channels, these sediment erosion products reinforce surrounding areas to prevent erosion and allow vegetation to take root.
Why Shop Erosion Control Products With Us?
Erosion Control Products aims to meet the needs and requirements of any project or area needing erosion conrol. With a wide selection of geotextiles, erosion control mats, erosion control blankets and coir, our erosion control products can be implemented in a wide range of applications for erosion and sediment control, as well as pollution prevention.
What is synthetic nonwoven geotextile?
For areas that require a long-term solution, Synthetic Nonwoven and Woven Geotextiles are also available to help with stabilization, aggregate separation, erosion control, road stabilization and filtration. Available products include:
How big are erosion control wattles?
Dig a small trench for the erosion control wattles (typically 2" to 5" in size).
What is a straw wattle?
Straw wattles are an excellent way to control sediment, erosion, and storm water runoff. Available in 9", 12", or 20" diameters, our straw fiber rolls effectively filter out sediment while still allowing water to flow into a storm drain.
How to contact straw wattle?
Questions about the straw wattle? We can help! Call our team at 1-863-270-8118 or fill out our quote request form to discuss your requirements.
