what can i use as a wreath base

Five Wreath Bases That You Can Embellish for Every Season

Full Answer

What can I use as a DIY wreath base?

Most wreaths are between 14 and 18 inches wide so you're going to need a pretty big piece of cardboard. A large shipping box could work, or an appliance box. You could also use foam core posterboard.

Whats the best base for a wreath?

a wreath base – ready made or make your own out of metal wire or flexible, bendy branches (willow being ideal). Remember, the thicker the base is, the more greenery you'll need to hide it.

Can you use straw as a wreath base?

Traditionally, wreath bases were made from straw which of course you can use today in place of moss.

How do you make a cardboard base wreath?

A cardboard wreath base is very easy to make. Find some sturdy cardboard (great use for those online delivery boxes!) Draw two concentric circles (i.e. one smaller circle inside a bigger one) to form the base, then cut it out. Wrap it in ribbon, and it's ready to decorate.

What to put on the back of a wreath to hang it?

0:262:50How to Make A Hanger on the Back of a Wreath - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with a pipe cleaner. You're going to take the ends of the pipe cleaner. And you're going toMoreStart with a pipe cleaner. You're going to take the ends of the pipe cleaner. And you're going to curl them up. And then you're going to curl this and fold this in half.

How do you secure the bottom of a wreath?

Hang your wreath with command hooks - Measure to find the middle of the door, and place a hook at the height you want your wreath to hang. Hook the back wire of your wreath on to the command hook. You can add another hook onto the bottom of the wreath, and secure it to the door, for added strength!

How do you hang a wreath without scratching the door?

Measure your ribbon from the point on the back of your door to the spot on the front of the door where you'd like your wreath to hang. Loop the ribbon through the wreath and tie it. Loop the tied end of your ribbon under your upside-down hook and drop the wreath over the top of the door so that it hangs down in front.

How do you hang a wreath on a door without an over the door hanger?

Hooks: If you don't want a wreath hanger on the exterior of your door, you can use a hook in the interior of your door instead. Place the hook upside down on the interior of your door. Then, using rope, twine, or string, make a loop on one end to fasten around the hook.

Are you supposed to fluff a wreath?

Regardless of the style you choose, you'll want your wreath to look it's best. So be sure to take some time to properly fluff your wreath before you display it!

How do you make a paper wreath base?

Shape the wreath into a circle. Cut newspaper pages into strips, about 1 to 1½” wide. Using 3 to 4 strips at a time, tape one end to the wreath and wrap the stripe tightly around the tube of newspaper. Tape the end.

How do you make a wreath from Dollar Tree?

2:093:25How to make Dollar Tree DIY Wreaths (easiest tutorial!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipForm. I saw wreaths almost like this at Target for near $40. And it's insane you can make it forMoreForm. I saw wreaths almost like this at Target for near $40. And it's insane you can make it for just 15 isn't this so pretty.

How do you make a wreath out of plastic bags?

How to Make a Wreath from Plastic BagsBend the hanger out in a circle.Cut the handles and bottoms off of the grocery bags.If there is printing on the bags, cut that part off.Fold the bag into one long strip.Cut the strip into 4 pieces.Cut the sides to make individual strips.Tie the strips to the hanger.

What glue is best for making wreaths?

Designer Tip: I highly recommend and personally only use Gorilla Glue Sticks. I mostly use the 4″ inch sticks but I have purchased the larger size sticks on occasion. In my opinion and not sponsored, Gorilla Glue Sticks are the best glue to use in all my wreath making and crafting projects!

What do you use to stick a wreath on a door?

How do you attach a wreath to a door?Use ribbon. ... Hang on the door knocker. ... Use the letterbox (secure at the back) ... Get a magnetic wreath hook. ... Use Command Strips. ... Try an over the door wreath hanger. ... Use a suction hook.

How do you hang a wreath without damaging your front door?

Measure your ribbon from the point on the back of your door to the spot on the front of the door where you'd like your wreath to hang. Loop the ribbon through the wreath and tie it. Loop the tied end of your ribbon under your upside-down hook and drop the wreath over the top of the door so that it hangs down in front.

What's the best way to hang a wreath on a wood door?

Place the hook upside down on the interior of your door. Then, using rope, twine, or string, make a loop on one end to fasten around the hook. Pull the string up and over the door onto the exterior side and tie the other end of the string around a section of your wreath and let it hang.

What kind of bags should I use for a wreath base?

If you're making this wreath base for a specific holiday like Christmas consider using white garbage bags rather than the black I used here.

What to do if you don't see an email from me?

If you don't see an email from me (Michelle Dunster) within a couple of minutes, be sure to check your spam folder just in case it landed in there!

Can you use a wreath base for Halloween?

You can use this base for Halloween, Christmas and really any other holiday you'd like.

How long is the string for a wreath?

If we want a wreath that is 16 inches across (diameter), it will have a radius of 8 (half of 16). So our string will need to be 8 inches long, from the pencil to the tack. Don’t cut the string 8″ long, you’ll need some length for tying the knots.

How many layers of cardboard do I need for a wreath?

You’ll probably want a few layers of cardboard to make a nice sturdy base. How many layers depends on what you’re glueing or attaching to the wreath. The flowers I was going to put on this wreath are fairly light, so I figured two layers of cardboard would be fine.

How to make an inner circle wreath?

To make the inner circle, tie another knot about an inch closer to the pencil. If you want a wide wreath frame, tie the knot a little closer. Put the tack back in the center hole and stretch the string out to draw a smaller inner circle.

What is a wreath frame?

Wreath frames (also called “wreath bases” or “wreath forms”) are basically the bottom layer of a wreath. Wreath frames are what you attach your flowers or greenery or whatever to, that give the wreath its shape and strength. The terms are pretty interchangeable, so don’t worry too much about that.

How wide is a wreath?

Most wreaths are between 14 and 18 inches wide so you’re going to need a pretty big piece of cardboard. A large shipping box could work, or an appliance box. You could also use foam core posterboard.

How big is the center of a poster board?

The center part of the display boards is 24″ (like foam core poster board), so it has plenty of space for cutting out the circle.

Can wreath frames be used outside?

This wreath frame works great for indoor use. It can be used outside, but just remember that its cardboard and might deteriorate in the elements.

I Want To Help You Reach Your Wreath Making Goals

To get a feel for what YOU really want to know (in addition to the questions I get asked every day), I decided to post a question on our Facebook Page and let you answer it.

Top Issues For Anyone Wanting To Start A Wreath Making Business

Here are the top issues for anyone wanting to start making wreaths for profit. This is where you’ll find help and all that juicy, insider knowledge that no one has thought to tell you before now.

How to Make a Wreath With Mesh & Other Tips and Techniques

Followers in our Facebook group gave me a long list of tips and techniques that they wished they learned sooner. In the interest of not making this post TOO long, I’m going to be brief.

Start a Wreath Making Business: Running a Business

Questions and comments concerning the business side of wreath making covered several areas. However, most of the questions centered around:

What to use for a wreath with asymmetrical flowers?

If you are hoping to make a wreath with an asymmetrical flower arrangement, grapevine wreaths would probably be the way to go. The exposed grapevine is pretty on its own.

How much does a foam wreath cost?

Sometimes called “extruded foam wreaths,” they’re made up of a very firm dry floral foam. They typically cost around $8 (use a coupon!) and are easy to find at most craft stores.

What is a straw wreath?

Straw Wreath Forms. The straw wreath form is probably the least commonly used form. It is similar in shape to the foam wreath form, but is definitely more rustic. I used in in my Easy Fall Mum Wreath, because the straw background made sense for the country farm feel of the fall mums. Straw and mums go hand in hand!

Why do I use grapevine wreaths?

I use grapevine wreaths in my garland wreaths because the branches blend in nicely with the greenery. They’re sturdy and fairly versatile, as far as the type of look you can achieve. Grapevine wreaths have a nice full base, and still look pretty with sparse flowers or greenery, which means a potentially low-cost wreath project.

What are the different types of wreath frames?

The most popular types of wreath frames are: extruded foam, grapevine, wire, straw, and hoop. Each type of wreath form is conducive to different types of greenery or flowers. And some wreath forms kind ...

What is wire wreath form?

Wire wreath forms are what people use to make burlap or deco-mesh wreaths. They can also be used for tie-on styles, like balloons, ribbons or fabric scraps. I use a wire wreath form for my Creepy Black Rose Wreath.

How many wires are in a dollar tree wreath?

They are usually a dark green, and typically have four wires that run around the circumference of the wreath form, and have a few straight wires that run across the width.

How do you make a glamorous Christmas wreath?

'For a glamorous Christmas wreath, it’s best to work tonally – different textures of the same color work well to add depth and interest whilst ensuring the overall look is tasteful and sophisticated, ' says Larry Walshe, celebrity London florist and founder of Bloom.

How to make a twinkle wreath?

Use a natural twig wreath as your base, then wire in sprigs of foliage and blooms (real or faux) as well as a set of battery-operated wire lights to create added twinkle.

What is a wreath hanger?

Wreath hangers will make arranging a row of wreaths simple. Or suspend a trio of wreaths from a ribbon or rope, tying in each one at even intervals.

How to display Christmas foliage?

Twist fresh foliage around a candle to create a simple display. Or use a ready-made wreath and pair it with a candle that fits the central hole perfectly. Full Christmas foliage will bring depth and texture to the display, so look for dense pine fronds or the small leaves and multiple stems of eucalyptus.

What is the name of the tree that forms the body of a Christmas wreath?

Christmas foliage – such as Cypress – forms the body of the wreath, with long pine branches wrapped over the top. A cut poinsettia inserted at the base of the circle adds a vivid hit of color and style.

What to hang on a mantel?

Lush foliage across a mantel is a key trend but it can look a little heavy and unbalanced. The answer: hang a coordinating wreath above to draw the eye upwards and create a full-on display.

What is the wreath on the back of a chair?

Adding a very simple wreath to the back of each chair creates a pared-back Christmas table scheme that feels well-considered and refined – the perfect nod to Christmas , but with a restrained touch.