You can be creative with ways to hide the wires of your home electrical devices:
- Bind power cords with tubing or cable ties. Place a decorative basket next to a table and insert the bound cords into the basket and out of sight.
- Use dark-colored plastic zip ties to attach power cords to furniture legs.
Full Answer
How to hide your TV wires in 30 minutes?
- Pick a drawer or lower cabinet at your desk that is near an outlet.
- Use a drill with a hole saw bit to drill a hole in the back of the drawer or cabinet. ...
- Feed the plug from the power strip through the grommet you just drilled in the back of the drawer or cabinet.
How to safely hide cables behind a wall?
- Measure the wall to determine the length of the cords you want to cover.
- Cut the cord cover to match the length you just measured.
- Use a pencil to mark the anchor points on the wall. ...
- Use anchors and screws to mount the base of the cord cover to the drywall. ...
- Lay the cables over the base and snap the cover on to conceal.
What's the best way to hide office wiring?
How to Hide Cables and Wires in an Office
- Your Options. If you are looking for a professional, organized and safer solution for hiding your cables, take a look at cable management.
- Overhead Cable Trays. In overhead cable management, cable trays or raceways are installed which support your wires near the ceiling.
- Furniture: Hiding Messy Cables. ...
- Cable Management Floor. ...
How to hide wires around the House?
CHARGER WIRES…
- SOLUTION #8 – USE A CABLE ORGANISER. ...
- SOLUTION #9 – CREATE A CHARGING STATION IN A DRAWER. ...
- SOLUTION #10 – MAKE A BOX INTO A CHARGING STATION. ...
- SOLUTION #11 – CREATE A CHARGING STATION OFF THE WORK SURFACE. ...
- SOLUTION #12 – BUY A CHARGING STATION. ...
- There you have it – loads of ideas for ways to hide wires at home. ...
What can be used to hide wires?
You can be creative with ways to hide the wires of your home electrical devices: Bind power cords with tubing or cable ties. Place a decorative basket next to a table and insert the bound cords into the basket and out of sight. Use dark-colored plastic zip ties to attach power cords to furniture legs.
How do you hide unsightly electrical wires?
0:323:23HIDING THOSE UNSIGHTLY ELECTRICAL CORDS - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use duct tape or you can use some simple scotch tape such as this it's very light in weightMoreYou can use duct tape or you can use some simple scotch tape such as this it's very light in weight and it won't leave much residue behind as well.
How do interior designers hide cords?
Add Some Area Rugs. ... Hide Cords Under Furniture. ... Move Cords Under the Floorboards. ... Add Some Cord Protectors. ... Run Electrical Cords Along Your Walls. ... Get Some Power Strips. ... Hide Electrical Cords In Baskets and Boxes. ... Use Them in Your Decorating.More items...
How do you cover exposed wires?
Electrical tape is the simplest method of making electric wires safe. You also use tape on capped live electric wires as an extra precaution. Tapes can be used on loose live wires that do not fit the cap. You can simply use tape over the live wire to fit into the cap.
What do you do with wires after removing light fixture?
0:041:32How to Cap Off Light Fixture Wires : Electrical Work - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore. You get the other one put two back together you want to make sure that those caps are onMoreBefore. You get the other one put two back together you want to make sure that those caps are on your wires. So that way somebody doesn't get electrocuted.
How do I hide the wires from my wall mounted TV?
For a less invasive but still stylish method, a cord cover raceway is a good bet. These nifty pieces can be either drilled or taped onto your wall. They run down your mounted TV to your TV stand, completely hiding the wires behind them! You can also paint them to make it blend in with your room.
How do I hide the wires to my wall mounted TV?
If your TV is mounted, you can use a wall cord concealer kit to hide your wires without cutting into your walls. This type of raceway usually has an adhesive backing, so you can stick it to your wall without damaging it. Then you can hide your TV wires and other cables inside it before snapping the cover on.
How to Hide Wires with Cord Covers
You’ll find a tangled mass of wires and cables in the area of the room where your TV is. That’s also where the cable box, DVD player and gaming system are along with their associated power cords. Hiding wires on a wall with a cord cover is uncomplicated and can be done in a short time.
How to Hide Wires in a Wall
It helps to know how to how to hide wires in the walls if you plan to buy a flat-screen TV, especially when installed using wall TV mounts. This task greatly reduces the number of power cords around this entertainment area.
How to Hide Electrical Cords
You can conceal power cords with a length of flex tubing and a few cable ties.
How to Cover Cables on the Floor
Cable wires and power cords on the floor are not only unsightly. They can be a safety hazard if someone trips over them. Cable protectors are thick covered plastic or rubber ramps designed to protect wires and cables from foot traffic. Many are modular designed to allow pieces to connect.
How to Hide Wires in Crown Moulding
Crown moulding is effective in concealing the electrical wiring from an outlet, running cable from one part of a room to another, or hiding the wires of a sound system you’re installing. If you are putting up crown moulding or taking down moulding you’ve previously installed, use cable raceways to enclose the wiring.
How to Create a Charging Station
A well located charging station is essential if you have a number of electrical devices in your home. It is easy to build one that hides the wires and cords from view.
Other Ways to Hide Wires
You can be creative with ways to hide the wires of your home electrical devices:
How to hang a basket upside down?
Use the metal hooks to hang the basket upside down underneath the desk. Run an extension cord from the outlet to the power strip. Use command hooks and the wire mold cord protector to hide the extension cord under a rug and attach it to the leg of the desk. Run wires from lamps and computers to the power strip.
How to hide wires under desk?
You can hide computer wires under your desk using binder clips. You use a washer and a screw to attach the binder clip underneath the desk. Once that is complete you can string cords where they need to go and clip them up with the binder clips.
How to hide wires on a flat screen TV?
Start by cutting your fabric to the length of the cords that you are trying to hide. You can hem the edges by sewing them or by using no-sew hem tape. Wrap the cord around the cables and secure it with Velcro. Congratulations your flat screen tv wires are hidden!
How to manage cable in furniture?
Small command hooks can help you with cable management by contouring cords to even the curviest of furniture . Don’t let different shaped furniture become overly tricky or hard to hide cables around. Just grab yourself some command hooks, place them on the piece of furniture where your cord is least likely to be seen, and attach your cord. You now have a great-looking piece of furniture without all of the dangling power cords!
How to hide cords on a table?
Using command hooks can be another great alternative to hiding cords. By attaching command hooks to the back of a table or other piece of furniture you can keep the excess cord hidden out of sight. It’s a great way to manage the cables on end table lamps and not have them laying on the floor. Overall, command hooks are an easy and affordable way to keep cords out of sight.
How to hide power cords in a metal stand?
If you have a piece of furniture that has metal, you are in luck! This DIY cable management system uses fabric and magnets to hide power cords. You cut a piece of fabric to the size of the space you would like to cover and attach the fabric to the stand using magnets. This is a quick and easy installation that lets you change the fabric as often as you would like. You could even change the fabric based on holidays, seasons, or if you redecorate.
How to keep cords organized?
Keeping extra cords organized can be hard. This cable management hack uses empty tic-tac containers to keep cords untangled and easy to find. Once you wind up your cord and place it inside the tic-tac container, add a label so you know what the cord goes to without having to open the container to check. Long gone are the days of a box stuffed with random cords!
How to cover a router?
Consider bookending your home library with a DIY router cover using this tutorial from BuzzFeed’s Nifty team. Grab a binder that’s wide enough to fit your router and use hot glue to cover the back, front, and spine of the binder with colorful scrap fabric, or better yet, the real jacket of an old book. Slip the router upright inside the binder, then sandwich the binder vertically between some books on an end table, desk, or shelf so that the router cables discreetly run down the length of the wall behind the furniture. Voilà! An instant classic that cuts cord clutter.
How to wrap cords in a home office?
Can’t manage the melange of cords in your home office for PCs, monitors, phones, printers, and other devices used daily? A cable wrap (e.g., Cable Slinky, available on Amazon) provides an easy way to consolidate all the loose cords that dangle from your desk. Simply bundle them together in your hands, and wrap the two-foot-long pieces of flexible foam tubing around the wires to corral them into one larger one and minimize chaos. Thanks to the slinky shape, you can break out and redirect wires from the group anywhere along the stretch so that they can reach exactly where they need to go.
How to hide cables behind TV?
If you’re feeling a bit craftier, you can hide a tangle of cables behind a stand-mounted TV by incorporating built-in cord storage into the design of your DIY TV stand. This one designed by Heidi from Kruse’s Workshop (and featured on Tatertots & Jello) keeps cables contained in a notch that runs down the middle leg at the back of the unit. You can recreate the stand from scratch with reclaimed wood: Follow the blogger’s detailed instructions for how to use a table saw to create a recessed groove in the back leg, then run the cords for your TV and other entertainment essentials down the groove in the leg to keep them out of sight.
How to hide cords from TV?
If the cords dangling from your wall-mounted TV are distracting you from what’s on screen, conceal them with cord covers (e.g., SimpleCord Cable Concealer Kit, available at Amazon ). Plastic tracks like these mount directly to the wall on top of wires.
How to make a dangling cord disappear?
1. Hook Cords to the Back of Your Furniture. Dangling cords disappear quickly when you anchor them to the silhouette of the nearest furniture. To do so, adhere clear Command Cord Clips (available in medium and large sizes on Amazon) along the back edges of your furniture.
How to keep cords out of wall?
The best solution for keeping the cords of a wall-mounted TV out of sight involves hi ding them behind the wall itself using recessed cable plates ( e.g., Datacomm Cable Organizer Kit, available on Amazon ). Remove the TV from the wall (or move it aside if your TV has an adjustable arm), and then use a stud finder to find two stud-free sections of the wall: one behind where the screen would sit, and another further down the wall near an outlet. These are where you’ll make your cuts using a utility knife, fit two cable plates, and feed the TV cords in and out of the wall. Your guests may just mistake your new media setup for a wireless entertainment system!
How long do you need to press 3M clips?
Like most of the line of renter-friendly solutions from 3M, you’ll need to press the clips in place for 30 seconds and, an hour later, you can hook in one or more cords and have them run neatly down the legs of your console. (These hooks help hide charging cords and cables at your desk really well, too!)
How to hide wires behind a computer?
Stick a cable catch at the back of your desk to hide wires behind it. Sometimes, you just need a basic cable management solution. If you've got wires hanging from your PC down behind your desk, stick cable catches on the back of the furniture. These look like small circles with a slit across the center. Stick the flat side of the catch to your desk. Then, push the wires through the slit so they run down the length of the desk instead of dangling.
How to hide wires in a cable box?
1. Set the box behind your desk on the ground to hide a lot of wires. It's easy to find stylish cable management boxes that match your room's aesthetic. Just set it on the ground behind your desk and place your power strip or surge protector in the box. Feed the cords through the slits at the end of the box.
How to hide cords on computer?
Gather the wires that are hanging from your PC and clip them together. Then, pull back one of the binder handles and press it flush against the back of your desk. Hammer a nail into the desk so the binder clip hangs from it and hides your cords.
How to protect wires from a desk?
A flat cord protector will not only protect your wires, it'll help conceal them, too! Buy a long cord protector and lay a strip of double-sided tape on the ground. Press the cord protector on the tape so it lies flat. Then, push the wires into the protector so it surrounds them. You can use the cord protector if your desk is in the middle of the room or if you have to run wires across a room to reach an outlet. The cord protector can be a slight tripping hazard, so you may want to run it along the baseboards of your wall if you can so it's not sticking out in the middle of the room. It's a simple and effective way to keep your wires protected from getting scraped or run over by chairs.
How to clean wires from PC?
Even after you hide most of the wires in a tray or box, you'll still have wires hanging from the PC to the storage system. To clean them up, pinch the hanging wires together and wrap them with a plastic zip tie or rubber tie.
How to make a zip tie look more polished?
For something more decorative than a zip tie, take a strip of braided sleeving or a piece of split tubing. Gather the wires and place them in the center of the sleeving or tubing. Then, wrap the material around the wires to hide them and give your wires a more polished look.
How to keep wires from hanging on desk?
These look like small circles with a slit across the center. Stick the flat side of the catch to your desk. Then, push the wires through the slit so they run down the length of the desk instead of dangling down. It'll keep them contained and out of view. It's also a great way to conceal wires or keep them out of the way if your desk is in the middle of the room. The cable catch will be visible from one side, but won't be visible from the front of your desk.
How to hide wires in a rug?
All you need to do is buy a carpet or a rug that is big enough to cover the area. This is used often with lighting chords in furniture arrangements placed in the middle of the room . Try to run the cord under the rug where it won’t be walked on too much (to avoid creating a tripping hazard).
What is going wireless?
Going wireless is an easy solution to cut the chord. Wireless systems were introduced purposefully for ease of access.That means no annoyance caused by wires. These days everything has the potential to go wireless, so you can have one centralized hub that holds the router, sound system, hard drives, cable boxes etc. across the room from where you’re TV or laptop are stationed.
What to look for when moving into a new space?
By Rachel Stinson, Freelance Writer#N#When you move into a new space it’s important for everything to look as sleek and stylish as ever, including all those fancy technological connections entertaining us, not to mention keeping us informed about the world around us.#N#Furnishing aside, if you’re someone whose into electronics you want to pull out all the stops. Surround sound, home theatre, computers, TV’s, top quality speakers are a MUST in any home, the only problem is setting these up in a way that the wires/cables are concealed from the human eye.#N#That requires hours of planning. If you like taking charge and doing everything yourself then you’ve come to the right place. We will guide you in a way that you get the best end result keeping your ‘manhood’ intact as well.
Is wire a menace?
So, we come to the conclusion that wires are a visible menace in an otherwise beautiful composition. They need to be dealt with so that your place doesn’t turn into an electrician’s warehouse.
Is surround sound a must in a home?
Surround sound, home theatre, computers, TV’s, top quality speakers are a MUST in any home, the only problem is setting these up in a way that the wires/cables are concealed from the human eye. That requires hours of planning. If you like taking charge and doing everything yourself then you’ve come to the right place.
