what can you use an oscillating tool for

What is an oscillating tool used for?

• 1. Trimming pipes and screws Fitted with the right oscillating multi-tool blades, your multi-tool can soon become a plumber or labourer's best friend. ...
• 2. Plunge cuts in your decking ...
• 3. Trimming wood and floorboards ...
• 4. Cutting out openings in drywall ...
• 5. Removing rust from metals ...
• 6. Sanding down furniture ...
• 7. Scraping adhesive ...
• 8. Removing mortar ...

Full Answer

What can you do with an oscillating tool?

What is an oscillating tool used for?

1. Trimming pipes and screws. Fitted with the right oscillating multi-tool blades, your multi-tool can soon become a plumber or labourer's best friend.
2. Plunge cuts in your decking. Plunge cuts can be difficult, dangerous and almost impossible to get right with a standard power tool.
3. Trimming wood and floorboards. ...
4. Cutting out openings in drywall. ...

More items...

What is the best oscillating tool for the money?

• BEST OVERALL: BOSCH Power Tools Oscillating Saw GOP40-30C
• RUNNER UP: PORTER-CABLE Oscillating Tool Kit PCE605K52
• BEST BUDGET: BLACK+DECKER Oscillating Multi-Tool BD200MTB
• BEST CORDLESS: DEWALT 20V MAX XR Oscillating Multi-Tool Kit DCS356D1
• MOST VERSATILE: DEWALT DWE315K Corded Oscillating Tool Kit

More items...

Which drill tool kit is good for home use?

• 1/2" chuck drill, (corded and cordless) possibly angle drill, to drill big holes and large lag screws.
• Impact drill, (cordless) for driving screws.
• Roto-hammer drill, (corded) for drilling masonry and chipping.
• 3/8" chuck drill (corded or cordless) for drilling smaller holes

What are the uses of an oscillating tool in carpentry?

What is an Oscillating Tool Used For

• Plunge Cuts. The head of an oscillating tool is used to make plunge cuts. ...
• Scribing. The oscillating tool is handheld and used to scribe onto the workpiece. ...
• Wood Cutting. ...
• Grout Removal. ...
• Sanding. ...
• Angle Grinding. ...
• Cutting Tile & Stone. ...
• Removing paint. ...
• Cutting Metal. ...

What is an oscillating tool good for?

The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. Its versatility lets you accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.

Is an oscillating tool worth it?

Are oscillating tools worth it in general? For the most part, yes. In two out of the three tests (cutting and sanding), even those on the bottom of the oscillating pile were more effective than the control tools.

What can I use a multi-tool for?

An oscillating multitool is a saw, scraper, sander, and grinder in one handy power tool. You'll wonder how you ever lived without it. If you don't own an oscillating multitool, buy one and you'll wonder how you ever got along without it. It's a saw, scraper, sander, and grinder in one handy power tool.

What is the difference between a multi-tool and oscillating tool?

0:163:42Oscillating Tool vs Rotary Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipTools that said it is often used interchangeably with the word rotary. Tool. Okay so a rotary toolMoreTools that said it is often used interchangeably with the word rotary. Tool. Okay so a rotary tool is a small handheld power tool one that does look similar to an oscillating multi. Tool.

Which is better angle grinder or oscillating tool?

If you want to cut, sand, polish, or scrape all types of materials with finesse and precision, then the angle grinder is your best bet. However, if you're used to working in tight spaces, then choose oscillating tools.

Can I cut tile with an oscillating tool?

Sure, the tool can be used for cutting tiles and are suitable for making small cuts on tile edges or cutting holes in the center of the tiles. For some DIYers, an oscillating tool is among the best tools for cutting tile.

Can you cut nails with an oscillating tool?

The bi-metal oscillating tool blades can be good for cutting nails and screws, and are especially good for jobs that involve cutting both wood and metal. If you are looking to make a straight cut into a piece of high quality metal, then you may want to go with semi-circular metal cutting blades.

Can an oscillating tool cut a 2x4?

It can certainly cut it, but it would be slow and depending on your skill, won't be very straight. It's definitely not the right tool for the job. Best tool would be a miter saw or a table saw.

Will an oscillating tool cut metal?

Fitted with the right oscillating multi-tool blades, your multi-tool can soon become a plumber or labourer's best friend. Set up as a multi-cutting tool, it can slice through plastic, copper or even galvanised metal piping with ease. Yes – multi-tools such as the Milwaukee M12FCOT-0 Cut Off Tool can cut through metal.

Is an oscillating tool the same as a Dremel?

Now, both of these tools do look quite similar, and yes, they can both perform many of the same tasks, but no, they are not the same thing.

Is a Dremel an oscillating tool?

DremelMulti-Max 3.5A Variable Speed Corded Oscillating MultiTool Kit+3Pk Universal 1-1/8 in. Carbide Flush Oscillating Blade. Ideal for a wide range of projects from opening drywall, cutting nails, fitting windows, and changing PVC pipe on vertical surfaces and difficult to reach areas.

Can Dremel be used as oscillating tool?

Dremel currently offers a wide variety of oscillating accessories, including cutting, scraping and grout removal blades, as well as sanding and grinding pads.

What should I look for when buying an oscillating tool?

Your Next Oscillating Tool • The Choices & FeaturesCorded or Battery Powered? The first thing to consider is whether you need a cordless or battery-powered operating tool. ... Available Replacement Parts. ... Additional Features. ... Variable Speed Control. ... Price Ranges You May Expect. ... Here's to Your Successful Home Projects!

Can a oscillating tool cut a 2x4?

It can certainly cut it, but it would be slow and depending on your skill, won't be very straight. It's definitely not the right tool for the job. Best tool would be a miter saw or a table saw.

Do oscillating tools make good Sanders?

Your Oscillating Tool is an Effective Sanding Tool, Too With the sanding pad attachment, an oscillating multi-tool can be great for sanding in tight spaces and around corners. For home DIY, the Sonicrafter F303. 5 Amp Oscillating Multi-Tool can be used for sawing and scraping.

How do you cut a straight line with an oscillating tool?

How to Cut Straight. To create a straight cut, a round or half-moon saw blade works best. You want to lightly press down on your tool creating a cut no more than 1/4 inch deep. Run your blade across the length of the cut multiple times with each pass making it a little deeper until you cut through your material.

What is oscillating tool?

Oscillating tools are perfect for tight situations where no other tool will fit. Use it to cut pipe in cramped quarters, to section out dry rot in a beam where a router or saw can't reach, to quickly cut out damaged flooring and more.

What tool to use to cut through door jambs?

If you're installing a new floor, a flush-cutting blade on an oscillating saw tool will slice through doorjambs like butter! With a scrap of flooring as a guide, the oscillating tool will make straight, clean cuts so that the new flooring will easily slip into place.

What blade to use to cut metal?

Use a Bimetal Blade to Cut Metal. Beware: Most blades sold in stores are meant for soft materials like wood and plastic. Cutting metal destroys them in a few seconds. For metal cutting, be sure to buy blades labeled bimetal.

What blade to use for plunge cuts?

A straight blade is best for plunge cuts, where you stab the blade into the surface. For long, linear cuts, use a round oscillating saw blade. You'll get cleaner cuts with the round blade if you make a shallow scoring cut first, then gradually deepen it with an oscillating saw.

What is the best blade for cutting pipe?

Extra-wide blades like this 2-1/2-in. version are perfect for cutting round stuff like pipe because they don't slip off a curved surface the way narrow blades do. For other jobs, narrower blades are usually best: They plunge-cut better and put less strain on the motor.

Can you use a reciprocating saw under a sink?

And you can forget about using a reciprocating saw under the sink deck—there simply isn't enough room. But you may be able to pull off the impossible by using an oscillating saw tool equipped with a high-quality bimetal cutting blade. Angle the tool against the nut and start it off at slow speed until it cuts a groove.

What is an Oscillating Tool?

An oscillating multi-tool (also known as an oscillating saw, multi-tools, multi-function tools, or oscillating tools) is a power-tool that uses rapid oscillating movement to do an assortment of jobs; including, but not limited to, cutting, sanding, scraping, polishing, and grinding. The power tool can accept different types of blades such as cutting blades, scrapers, rasps, sanding pads, etc. The unique design of the tool enables it to reach and maneuver at tight spaces with ease.

Which is better: oscillating saw or multi tool?

You will have more control over your tool with the higher angular movement of the blade. This means that an oscillating saw with 1.8 degrees is better for precise cutting than an oscillating multi-tool with 3.2-degree oscillating angle.

What tool do you use to cut a hole in a wood floor?

All you need to do is mark the opening that you need and use an oscillating saw with a wood cutting blade to plunge cut the opening. The other tool you can use to do plunge cutting is the reciprocating saw. However, they are heavy-duty tools suitable for demolition work.

What can a power tool accept?

The power tool can accept different types of blades such as cutting blades, scrapers, rasps, sanding pads, etc. The unique design of the tool enables it to reach and maneuver at tight spaces with ease.

Why do you need a multitool?

My reasoning is that since the purpose of a multi-tool is to do a lot of jobs with one tool and to reach tight spaces, you do not want to be constricted by their being an outlet nearby. Since you are going to be using the multi-tool all around the house, you want to have a lot of freedom of movement.

How to remove paint from a wall with a multitool?

Thankfully, removing paint with an oscillating multi-tool is very easy. Simply attach the metal scraping attachment and then proceed to scrape away the paint.

What is the angle of oscillation?

The high-speed side-to-side movement or oscillation looks like a vibration action. The angle of oscillation generally varies from 2 to 3 degrees. How oscillating multi-tool works to cut wood.

What is oscillating multitool?

The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. Its versatility lets you accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.

What is a multitool?

Designed for smaller applications, a multi-tool does its best work in areas where accessibility is key. Typically, when you need an oscillating multi-tool, no other tool will get the job done. Using an oscillating multi-tool simply involves attaching the appropriate accessory and turning it on. Originally, every tool had its own type of connection.

How does Bosch Starlock work?

You simply flip a lever to release the accessory or open the mount. Then, you physically press the oscillating multi-tool onto the new accessory which automatically snaps it into place.

What blade to use for nailing?

If you suspect you might hit nails, opt for a carbide blade that can tackle wood and nails. Not only will it get the job done, but it should last for dozens of jobs. The technique uses a tile or piece of wood which the tool sits atop. This sets the height of the undercut.

Can you use OIS with Starlock?

Most Starlock accessories now come with OIS-compatible holes, however, no OIS accessories are compatible with Starlock due to the 3D “bottle cap” shape of the interface .

Can you use an oscillating multitool as a detail sander?

The action on an oscillating multi-tool gives it a sort of orbital sanding action when used over small areas. Swapping the blade attachment for the sanding attachment, you can use the oscillating multi-tool as a small detail sander. It’s not a replacement for other handheld sanders, but it will work for small areas.

Can oscillating multitools be used for undercutting?

Perhaps the best way Pros use an oscillating multi-tool is for undercutting doors when tiling or flooring. We did quite a bit of flush-cutting when we did our Pergo Outlast laminate flooring review. Get a good Japanese tooth blade when going after hardwood trim, and you’ll be done in no time. If you suspect you might hit nails, opt for a carbide blade that can tackle wood and nails. Not only will it get the job done, but it should last for dozens of jobs.

What is an oscillating multitool?

An oscillating multitool is a saw, scraper, sander, and grinder in one handy power tool. You'll wonder how you ever lived without it. If you don’t own an oscillating multitool, buy one and you’ll wonder how you got along without it. It’s a saw, scraper, sander, and grinder in one handy power tool. It not only does those jobs, it does them in ...

What tool is used to cut slots?

Whether you're installing cabinets; modifying them to accommodate a new sink or dishwasher; or installing new hardware, such as a slide-out pantry, the fastest way to cut slots, squares, and notches is with an oscillating tool and a saw blade. The ability to offset the tool axis relative to the saw blade is a distinct advantage that speeds and simplifies the cut.

What blade to use for drywall cutouts?

Bosch. A clean, simple way to make a cutout in drywall for a switch box or outlet receptacle is to use an oscillating multitool with a bimetal or carbide-grit blade that will not only cut the drywall but will withstand impact with a drywall nail or screw.

How to improve the appearance of old wood windows?

You can improve the function, appearance, weather tightness, and energy efficiency of old wood windows with an overhaul that includes sanding, cutting slots for weather stripping, and removing layers of old paint. An oscillating mutlitool's sanding, grinding, and saw-blade attachments provide for all of these.

Can you cut a wall with an oscillating tool?

Before the advent of the oscillating tool, adding or modifying interior partitions involved more demolition than construction. Now, you can make a surgical cut along anywhere on the wall, but especially along baseboard and other trim surfaces.