what can you use for anti seize

What is anti seize compound used for?

The goal of using anti-seize compound is to coat the threads with the compound preventing corrosion and adhesion between the thread and the fastener. Too much anti-seize applied to the thread can attract debris that may contaminate the thread and prevent the fastener from being removed cleanly.

What is the best anti seize compound for brakes?

Copper grease is an anti seize compound, so whilst technically it isn’t a lubricant, it’s often used for these purposes. Using Copper Grease is a sure way to seize up the slider pins – When I first started doing this type of thing many years ago, many people were using copper grease for their entire brakes.

What is the best way to apply anti-seize?

For the application of a thin layer of anti-seize, a brush is normally most effective. Using a brush will produce a more even layer than using a gloved hand/finger, especially on threads.

What are anti-seize products?

Anti-seizes can be pastes, greases and coatings, and they can be based on a wide range of materials (e.g. copper, nickel) to suit particular systems. Therefore, the selection of the correct anti-seize product for the particular system is crucial. A selection guide is available 2. Why use Anti Seize?

Can you use WD-40 as anti seize?

WD-40 should not be used on lug nuts whether to try to remove them or to clean off rust. By applying oil, grease, or an anti-seize preparation to the threads, you run the risk of over-torquing them when you tighten up your wheels. WD-40 tends to be more of a band-aid fix than anything.

Can grease be used as anti seize?

However, anti-seize is not suitable for fast-moving applications, as its high solids content can cause parts to jam....Anti-Seize.GreaseAnti-SeizeGood for fast-moving, low contact, low pressure applicationsGood for slow-moving, extremely high contact and high-pressure applications2 more rows•May 1, 2020

What is anti seize material?

Anti-seize compounds, also known as anti-stick compounds or thread lubricants, prevent threaded couplings from binding or sticking. They are applied to the threads of bolts and other mechanical fasteners.

What is anti seize compound made of?

What is Anti-Seize? Straight out of the tube or bottle, anti-seize is made up of a high-quality grease base and lubricating solids (copper, graphite, aluminum, calcium oxide etc.), which are suspended in the grease.

Is brake grease anti seize?

What Is Anti-Seize? Anti-seize is also a greasy lubricating substance, but unlike brake grease, it can take some heat. It can withstand temperatures up to 2600 degrees, thanks to its high-solids content. The flip side of that is that it can't be applied to fast-moving metals.

How do you stop a bolt from seizing?

Use a Lubricant Examples include MRO Solutions Antiseize, Permatex® Anti-Seize Lubricant, Finish Line™ Anti-Seize Assembly Lube and USS Ultra Tef-Gel®. Even a standard lubricant, such as WD-40®, can help reduce friction and prevent galling. Some nuts are available with a waxed finish to reduce the risk of galling.

When should you not use anti seize?

Do not use anti-seize as a lubricant such as on caliper slide pins or on threads for a bushing press or any mechanical assembly that requires a lubricant. Do not use anti-seize on exposed threads because the compound can attract contaminants that may contribute to thread damage when the fastener is removed.

What is the best type of anti seize?

The Best Anti-Seize ProductsPermatex 80208 Anti-Seize Lubricant. ... Permatex 81464 Anti-Seize Lubricant. ... Permatex 81343 Anti-Seize Lubricant. ... Permatex 77164 Nickel Anti-Seize Lubricant. ... Permatex 31163 Copper Anti-Seize Lubricant. ... Loctite 299175 Paste Anti-Seize Lubricant. ... Loctite 37617 Anti-Seize Lubricant.More items...•

Is copper grease anti seize?

Copper grease is an anti seize compound designed to operate at extremes of temperature. Note, it is not a lubricant. It is often used to help prevent seizing and corrosion at high temperatures in the automotive industry.

Will anti-seize cause bolts to loosen?

Adding anti-seize will cause the bolts to loosen and quite quickly. This is due to the extreme vibration of the 2 stroke engine. However using low strength locite not only stops the bolts from loosening, but also slows corrosion.

What anti-seize for brakes?

3M Copper Anti-Seize Brake Lube is a metal to metal lubricant for brake systems, spark plugs, oxygen sensors and more. This blend of particle-sized metals in a semi-synthetic grease is engineered to withstand extreme pressures and intermittent temperatures up to 2000 degrees F, maintaining free movement between metals.

What is anti-seize food grade?

FOODLUBE Anti-Seize is a white, non-toxic lubricating grease designed for use as an anti-seize, assembly lubricant and thread compound.

Can I use grease instead of anti-seize on spark plugs?

Metal shell stretch changes the heat rating of the spark plug and can result in serious engine damage caused by pre-ignition. Do not use anti-seize or lubricant on NGK spark plugs. It is completely unnecessary and can be detrimental.

Can you use white lithium grease as anti-seize?

White lithium grease is used to keep components moving smoothly, free of friction and seizing. You can also apply it preventatively to protect against rust and corrosion.

Is Moly grease anti-seize?

Product Description. Moly-Lit is an extra heavy-duty, extreme-pressure, and low-friction Anti-Seize Compound and lubricant.

Is copper grease the same as anti-seize?

Copper grease is an anti-seize grease as opposed to a lubricant.

What Are the Benefits of Anti-Seize Compounds?

There are multiple preventative benefits to utilizing anti-seize compounds, such as:

What Types of Anti-Seize Compounds Are There?

GorillaPro® anti-seize compounds come in two forms: copper-based and nickel-based. They are highly refined, heavy-duty, high-temperature lubricants that provide a barrier between metal surfaces to prevent galling, seizure and corrosion in extremely stressful environments.

Why Copper Grease is a No Go

The question brake grease vs anti seize is hard, because technically copper grease fits into both of these categories. It’s a grease, but it’s actually an anti seize compound.

What to Use Instead

Instead of using copper grease on your brake pads, you should look to use a lubricant that’s specifically designed for greasing brakes. There are a few options on the market to choose from, and I’ll share with you a couple of my favorites.

How to Grease the Brake Slide Pins

Once you know how to grease your slide pins, it becomes an easy task. But at first, it can be a little daunting if you don’t know what you’re doing properly.

Conclusion

Overall, these are the best options for you if you’re trying to grease your brake pins. They are definitely the best options – if you’re trying to grease your own brakes, you’ll undoubtedly want to opt for a lubricant specifically designed for this need.

Brake grease, not anti-seize is the go-to lubricant for disc brakes

Many people use anti-seize to lubricant caliper slide pins. Then they wonder why their caliper slide pins seize. First, anti-seize is specifically NOT recommended for brake applications. It’s not a lubricant. It was never designed as a lubricant.

Anti-seize is a high solids lubricant which is the last thing you want for caliper slide pins

Would you add sand to a caliper pin lubricant? I didn’t think so. Well, that’s kinda what you’re doing when you use anti-seize on caliper slide pins. But instead of sand, you’re adding aluminum, nickel or copper chips; all of which inhibit movement. As the carrier grease burns off at high temps, you’re left with degraded grease and metal chips.

Anti-seize causes more corrosion, not less

Any time you have two different types of metal in close proximity, you get galvanic action. In brake applications you have steel caliper slide pins inside a caliper pin bore that’s made from aluminum or a magnesium alloy. When you lubricate the pins with anti-seize, you’re adding yet another metal that can accelerate galvanic action.

Where should you use anti-seize?

Anti-seize is designed to prevent metal components from seizing. So brush a thin film of anti-seize around the wheel hub to prevent the rotor from seizing to the hub.