Here's a basic list of essential maintenance chemicals that every spa or hot tub owner must have:
- Spa Sanitizer – Usually Bromine or Chlorine
- pH Increaser and Decreaser
- Total Alkalinity Increaser
- Calcium Hardness Increaser
- Spa Shock – Either Chlorine or MPS
- Spa sanitiser such as bromine or chlorine.
- A pH increaser and decreaser such as FreshWater® pH/Alkalinity Up and FreshWater® pH/Alkalinity Down.
- Spa shock solution, such as chlorine or MPS.
What chemicals to use to start a hot tub?
- AquaChek 6in1 Test Strips (50 Strips)
- Granular pH Minus (2 lbs.)
- Granular pH Plus (1.5 lbs.)
- Granular Non-Chlorine Shock (2 lbs.)
- Liquid Prevent II (16 oz.)
- Granular Chlor-Aid (2 lbs.)
What are the best hot tub chemicals?
iONRx is hands down the best natural hot tub water treatment on the market today. It completely gets rid of harsh chemical smells, keeps hot tub water clean, and is one of the most gentle hot tub chemicals for sensitive skin out there. There is a reason why it is the most-used natural hot tub chemical for both residential and commercial hot tubs.
What chemicals should I use in my inflatable hot tub?
What chemicals should I use in my inflatable hot tub? Chlorine. Chlorine is the most popular inflatable hot tub water sanitizer by far. Chlorine tablets. You use chlorine tablets in the plastic chemical floater that comes with your inflatable hot tub. Chlorine granules.
Which chemicals should you use to disinfect your hot tub?
- Sanitize with hot tub chlorine or bromine on a weekly basis. This keeps the water clean.
- Clean the filter monthly to remove trapped debris and grime. ...
- Clean the hot tub shell every 3 to 4 months to prevent buildup.
- Keep the hot tub lid free of dust and leaves by cleaning it monthly.
- When not in use, keep the hot tub protected with a lid.
What to do if your hot tub is cloudy?
How does hot tub water stay sanitized?
How to balance pH in water?
What is the ideal alkalinity of water?
What should the pH of water be?
Is Hot Tub Digest an affiliate?
Does bromine smell like chlorine?
See 2 more
What order do I add chemicals to hot tub?
What Order Do You Add Hot Tub Chemicals?Add metal sequestrant or stain preventer if necessary. If you need to add this to your water, do so before adding any other chemicals. ... Adjust alkalinity and pH. Your pH helps your sanitizer work more effectively. ... Adjust calcium hardness levels.
Can I use my hot tub for the first time without chemicals?
While you could use a hot tub without chemicals, you could not soak safely. Water needs to be circulating and treated in order for it to be good for soaking. When you don't use chemicals in your hot tub or use too little, you are creating the perfect environment for algae, bacteria, and other contaminants to thrive.
How much chemicals should I put in my hot tub for the first time?
Typically, the amount of chlorine you need to put in your hot tub for the first time is around one teaspoon of chlorine granules for every 100 gallons of fresh water. Generally, you need to aim for a chlorine level of between 5 and 8 ppm.
How do I treat my first hot tub?
Filling Up a Hot Tub for the First TimeFill your hot tub with water from a garden hose. ... Turn thermostat(s) OFF at equipment system in cabinet, and at command center (if your spa is equipped with one).Turn power ON at your disconnect box.Be sure ON/OFF switch is ON at equipment system in cabinet.More items...
How soon can you use a hot tub after installation?
Enjoy Your New Hot Tub. It will take around four to eight hours, or longer, for your new hot tub to reach appropriate temperatures (100 to 106 degrees Fahrenheit). You may also want to wait a day to ensure that the chemicals in your water are balanced correctly and that any chlorine level is safe.
Do you need to shock a new hot tub?
Shocking your hot tub is the easiest way you can ensure that the water is safe and free from all contaminates. Whenever you open your hot tub, or after a period of inactivity or even heavy use, it is a good idea to shock it before you begin using it.
How do you shock a hot tub for the first time?
Most products require 17g of non-chlorine shock per 1500 litres of water or 35g of chlorine shock per 1500 litres. Carefully pour the treatment into your spa near the water inlets. This will allow it to circulate evenly. Wait for at least 20 minutes before using your spa.
When should I shock my hot tub?
once a weekGenerally it is recommended that you shock your hot tub once a week – more often if it's seeing heavy use. If your levels are all good, but the water is a bit cloudy or doesn't quite smell right, it's time for a shock. You should also shock the tub if you haven't used it for an extended period of time.
How long can you leave a hot tub without chemicals?
If you do not want to put any chemicals in to your hot tub, no problem. But you must drain down and refill after each use and ensure that the water is never in the spa for more than 12 hours!
What spa chemicals do I need?
Here's a basic list of essential maintenance chemicals that every spa or hot tub owner must have:Spa Sanitizer – Usually Bromine or Chlorine.pH Increaser and Decreaser.Total Alkalinity Increaser.Calcium Hardness Increaser.Spa Shock – Either Chlorine or MPS.
How long does it take to heat up a hot tub for the first time?
Typically, water heats up by five to ten degrees Fahrenheit in an hour. Heating your hot tub to the desired temperature in the 100 to 102 degrees Fahrenheit range can take three to eight hours.
When should I add chlorine to my hot tub?
You should generally add chlorine to your hot tub every 1-3 days depending on usage. A typical use of one person taking a 15-minute soak once a week might only require adding chlorine every 2-3 days, while more frequent use can mean topping up the chlorine every day.
Can you use hot tub straight away?
As such, you'll need to wait for it to reduce naturally before using your spa. During this time, the cover should remain off for at least 20 minutes while running a regular jet cycle. This will reduce the risk of chemical damage to the tub and any accessories.
How long can you run a hot tub without chemicals?
Bacteria could start growing in a hot tub without chemicals within 2-3 days.
How long can you hot tub without chemicals?
If you do not want to put any chemicals in to your hot tub, no problem. But you must drain down and refill after each use and ensure that the water is never in the spa for more than 12 hours!
Can you run a spa without chemicals?
Bromine has less of a smell, it's not quite as harsh on skin and hair, and it has other advantages over chlorine. But seriously, the real answer is YES! You can run your spa without chlorine OR bromine, and still have a safe and sanitary spa.
When and how do I put chemicals in the hot tub?
The first step is to remove the hot tub cover. The hot tub must be kept open during this time as when the chemicals are put in the hot tub; they release gas.
How long does it take to use a spa?
Well, it depends on how much amount of chemicals you have put in your spa. It can take anywhere from 3 hours to 24 hours. The safe way is to use your spa after 24 hours
How to make your water crystal clear?
To make your water look crystal clear, you need to use clarifiers. Clarifier chemicals are generally used for spa filters or when water is cloudy. Clarifiers don’t clean the problem from its root, so it is better to use chemicals along with the clarifiers. Clarifiers act as polymers and attract themselves to particles floating around in the water.
What is the purpose of sanitizer in a hot tub?
Maintaining a sufficient level of sanitizer is very crucial. Sanitizers are used as a disinfectant against various pathogens and purify the hot tub water. The sanitizers used by most hot tub owners are:
What is a pre filter for a hot tub?
(Don’t overthink the “pre-filter” designation; you are simply filtering the water before it enters your hot tub.) One of our favorite pre-filter products is the Pure Fill Spa Pre-Filter by Blue Water.
What to do if you left your hot tub filter in?
Clean the Filters. If by mistake you left your filters in the hot tub when it was closed, you will want to make sure they receive a thorough cleaning. If you have a spray nozzle attached to your garden hose, this should do the trick.
How hot should my hot tub water be?
But, before you begin, make sure your hot tub’s water reaches a temperature of at least 82º Fahrenheit.
How to get rid of bacteria in hot tub?
This is one of the easiest steps. Simply attach a garden hose and spray down the shell.
Why is it important to clean jet lines after balancing your pH?
That is why it’s important to follow the steps in a particular order so you are no re-contaminating your hot tub.
How to check the chemistry of a hot tub?
To ensure the chemistry of your hot tub is correct, sample the water’s alkalinity by using a test strip such as AquaChek Test Strips (found in MSP’s Hot Tub Chemical Starter Kit ). These test strips make it easy to check the balance of your hot tub’s pH and chlorine levels.
Do you need to turn off power to hot tub?
During the process of starting up your hot tub, you may want to ensure your pump is firmly connected, there are no loose connections or fittings , the heater is plugged in, and any drain valves are closed. And, if you are working around any areas with electrical components, be sure to turn off power to the hot tub first. So let's get started with the first step, shall we?
Why do I need to use chemicals for my hot tub?
The hot tub temperature is perfect for bacteria to breed and multiply, so the need to use chemicals in your hot tub is not optional. It does not matter how good your filtration is; dirt must still make its way into your hot tub through the air or from bodies that bath/soak in it.
What chemicals should I put in my hot tub for the first time?
Every hot tub requires a balanced chemical level to ensure that the water is always crystal clean and clear. The following are steps you need to follow to ensure that your hot top is chemically balanced
Why you need the right hot tub chemicals
It is essential to use the appropriate chemical for the appropriate problem because when you use the wrong chemical to solve a problem, it creates more problems than a solution. It will not be wise for you to save costs when trying to clean or treat your hot tub because it will end up costing more in the nearest future.
Steps on how to add chemicals to your hot tub
Some various measures and steps need to be followed when adding chemicals to your hot tub, and they are as follows;
How to store hot tub chemicals
It is essential to ensure that hot tub chemicals are appropriately stored and always out of children’s reach. Some chemicals are sensitive to high and low-temperature change. When some chemicals are exposed to high temperatures, they begin to expand; also, it affects their potency when exposed to shallow temperatures.
How to care for your hot tub
It is very important that you use chemicals in your hot tub so that your hot tub is always clean and crystal clear
Conclusion
As a hot tub owner, you need to ensure that you take proper care of your hot tub so that you can continue to enjoy the benefits and pleasure that come with it. All you need to do is test your water daily, adds an alkaline increaser/decreaser, a pH increaser/decreaser, a good sanitizer, shock anti-foamer, enzymes, and clarifier when necessary.
How to keep pH in check in hot tub?
To keep your hot tub pH in check, you should have a pH increaser and a pH decreaser. Just like as the name indicates, you will use a pH increaser if your pH is low and a pH decreaser if the level is high. But what is pH and why should you care? It indicates how acidic or “basic” your hot tub water is.
What to use in hot tub water?
A sanitizer keeps the water balanced and safe to use. You can use either chlorine or bromine.
Why is my hot tub water turning brown?
A sequestering agent helps remove calcium and heavy metals from your water. The presence of metals or minerals can cause your hot tub water to turn an unsightly hue— brown, red, orange, or green.
What does it mean when your hot tub water is cloudy?
This measurement will tell you how much magnesium and calcium in the water. If this is not balanced, though, your hot tub water could be foamy or cloudy. You might also notice scale build-up or, worse, damage to the metal components.
What is non chlorine shock?
Non-Chlorine Shock. A shocking agent releases oxygen into the water, which serves a similar function as chlorine. Shocking the water increases the total chlorine level above the recommended level for a brief time. The process sanitizes the water and removes the things you don’t want — like chloramines and bacteria.
What is the purpose of regular maintenance on a hot tub?
Regular hot tub maintenance will help ensure that your spa is clean and clear for relaxing. Master Spas owners can enjoy the added benefit of the EcoPur water management system, which purifies the water with fewer chemicals.
When to use sequestering agent?
When to add a sequestering agent: Use a sequestering agent if your hot tub water is brown, red, orange or green. It is also important to add a sequestering agent when adding water to your tub.
How long after spa is operational can you check pH?
12. 24 to 48 hours after the spa has been operational, check alkalinity and pH with test strips or test kit—adjust accordingly. Do not complete this step until this water is hot and has been in for 24 or more hours. 13. Do Timely Maintenance as directed, and most importantly, ENJOY YOUR SPA!
How to contact Royal Spa?
As always, if you have any questions about filling up your hot tub for the first time, please don’t hesitate to ask. You can reach us by phone at (317) 912-1633, or you can contact your Royal Spa representative directly.
Where is the clear tube coming out of a water heater?
You can also check the clear tube coming out of the small circulating pump, (at equipment system inside of the cabinet) and going into the heater housing , to see if the water is flowing properly.
What do you need for an inflatable hot tub?
A clean and properly-treated water. You will need to use the right chemicals for inflatable hot tub to achieve this.
Why do you need sanitizer in a hot tub?
Sanitizers are very important in keeping a hot tub water clean. They are used to kill bacteria which can easily thrive in warm untreated water of a spa.
How to lower pH in spa?
In case you ended up adding too much with the Spa Up, you can lower down the pH level by adding the Spa Down. You can also add some water to the tub to get it back to optimal level.
What is the pH level of a leisure time spa?
Your aim is not to make your hot tub water too alkaline, but to hit an optimal pH of 7.2 to 7.8.
What is the best pool test strip?
The Poolmaster 22211 Smart Test 4-Way Swimming Pool and Spa Water Chemistry Test Strips is the best product for this. A lot of pool experts are using this too plus it comes with 50 test strips.
Why is it important to keep your pH level high?
The idea is that a high pH level means the water is on the alkaline side while a lower value means it’s too acidic. Leisure Time Spa Up and Spa Down are great choices for adjusting your water’s pH level.
How long to dip test strips in water?
It only involves dipping a test strip in the water for 2 seconds. You then shake off excess water and specific colors will appear on the strip. Colors will appear on the strip and all you have to do is compare it with the color chart on the bottle.
Why does my hot tub get bubbly?
Some hot tubs have air valves placed around the top. The air is mixed with water to add more pressure to the massaging jets, and that’s why your hot tub gets all bubbly. When air is introduced, chemicals like shock and chlorine won’t effectively do their job. They will gas off too quickly.
Why do you need to keep a hot tub running?
The reason you need to keep it running is so that when you add chemicals, they will mix well into the hot tub water. The jets will help mix the chemicals. 2.
How do chlorine and shock work?
Chlorine and shock work best when the water is properly balanced. 5. Pre-Measure The Chemicals Before Adding. To get the exact amount of chemicals your hot tub needs, it’s a good idea to measure out your chemicals before adding them. Don’t just hap-haphazardly dump chemicals in your hot tub.
How long should you leave the cover off after adding chemicals to a hot tub?
Chlorine is another chemical that does this. That’s why it’s important to give you hot tub breathing room by leaving the cover off for at least 15 minutes after adding any chemicals, just as a rule of thumb. 3.
Can you add chemicals to a hot tub?
It seems like an easy chore to add chemicals to your hot tub. However, there are some basic rules you should follow when doing so. We’ve outlined all the steps you need to take to properly add chemicals to your hot tub.
What to do if your hot tub is cloudy?
If the water looks cloudy or dirty, you can change the water and fill the hot tub with fresh water.
How does hot tub water stay sanitized?
The water in a hot tub can stay in for extended periods, and chemicals keep the water sanitized. As the water is heated up regularly, it can lead to the birth of germs and bacteria in the water. To ensure a safe and sanitized environment in the hot tub, you should keep a check on the level of chemicals in the hot tub.
How to balance pH in water?
Adding Sanitizer – Once you have balanced the alkaline and pH level of the water, you can add a sanitizer. When adding chlorine for the first time, you should aim at higher free chlorine in the water so that it can disinfect all parts ...
What is the ideal alkalinity of water?
The ideal alkalinity of the water should be anywhere between 100-120 ppm. Before you balance the pH, you need to balance the alkalinity as changing it later can impact the pH value. If the alkaline level is lower than 100 ppm, add a chemical agent to increase alkalinity.
What should the pH of water be?
The ideal pH value of the water should be between 7.2 and 7.6. If the pH is higher or lower, add the pH decreasing agent or a pH increasing agent as needed.
Is Hot Tub Digest an affiliate?
HotTubDigest is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to amazon.com, endless.com, smallparts.com, myhabit.com, and any other website that may be affiliated with Amazon Service LLC Associates Program. Copyright 2014 - 2021 by Hot Tub Digest.
Does bromine smell like chlorine?
One benefit of using bromine is that it does not give off a chemical smell like chlorine. For bromine, maintain a level of 3-5 ppm in the water of your hot tub. You can use liquid bromine or bromine tablets in the amounts recommended by the manufacturer for your hot tub’s size.