Why choose Redken’s cover fusion?
Since aging hair often suffers from a loss of density or loss of fullness from thinning, this delightful service using Redken’s NEW Cover Fusion low ammonia, 100% coverage color cream will give hair an amazing blend of copper and gold tones while adding density and fullness! Keyword: educationredken
How do I apply Redken chemistry to my hair?
Redken Chemistry as needed. Dry hair. Apply color generously to Zone 1 (the scalp area) using fine ¼" diagonal partings. 3. Use the opposite diagonal to cross-check and ensure proper application. 4. COLOR FUSIONUse a timer to ensure accurate timing. Do not over or under process.
Does Redken cover gray hair?
This can make the hairs more resistant to absorbing dye, making gray coverage potentially more challenging than other color processes. Happily, Redken has got you (and your grays) covered. Here’s what you need to know about the best ways to achieve perfect gray coverage. What Is The Best Way To Cover Gray Hair?
What are the different levels of color fusion?
COLOR FUSION EXTRA LIFT** VIOLET LIGHT NEUTRAL BLUE TITANIUM MEDIUM NEUTRAL GREEN NO BACKGROUND COLOR EL-V EL-LN EL-B EL-T EL-MN EL-G Bases 7-10 Shown on Level 7 Bases 6-10 Shown on Level 6 Bases 5-7 Shown on Level 6 Bases 3-5 Shown on Level 5 Bases 1-5 Shown on Level 3 Bases 1-3 Shown on Level 3 COLOR FUSION ADVANCED PERFORMANCE COLOR CREAM
How long does it take to heat up a color liftshade?
How much gray coverage is needed for a 20 volume?
How much volume to mix for gray hair?
What diagonal to use to cross check?
What is advanced performance color?
Where is the regrowth area in hair?
See 1 more
How do you use Redken Color Fusion?
2:063:49How To: Color Fusion Hair Coloring Technique - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by working in the back and using your crock clip for isolation. Start by saturating the rootMoreStart by working in the back and using your crock clip for isolation. Start by saturating the root or regrowth area of the hair and then fusing or blending that color out with the brush.
What developer do you use with Redken?
Redken Pro-Oxide Cream Developer Peroxide is to be used with Redken Color Fusion, Color Gels, and all Redken Lighteners.
What do you mix cover fusion with?
Use only with 20 volume Pro-oxide Cream Developer and mix at a 1:1 ratio. Cover Fusion is not intermixable with other Color Fusion shades.
How long does Redken Color Fusion take to process?
35-45 minutesProcess 35-45 minutes.
Can you use 10 vol with Redken color gels?
How Can I Mix Redken Color Gels Lacquers? Color Gels Lacquers is mixed in a 1:1 ratio using Redken Pro-Oxide Cream Developers (10 – 40 vol). Develop for up to 45 minutes depending on your desired results.
Can I use any developer with Redken color gels?
WHICH DEVELOPER SHOULD I USE WITH COLOR GELS LACQUERS 10 MINUTE? Color Gels Lacquers 10 Minute is compatible with Pro-oxide Cream Developer! For best results, use 20 volume.
How many levels does color fusion lift?
5 levelsExtra Lift: Advanced permanent color cream featuring the exclusive Uplift ColorBond Technology to provide up to 5 levels of lift. Delivers high confidence lift with excellent conditioning, predictability and shine.
How do you use Redken Pro-oxide Cream Developer?
In the bowl mix Color in a 1:1 ratio with Volume 20 Pro-oxide Cream Developer for up to 2 levels of lift. Apply with brush or bottle using a Traditional or Modern Virgin Application. Apply color generously using fine 1/4" diagonal partings. Cross-check application.
Does Redken Chromatics lift color?
Redken Chromatics Extra Lift maximizes your blonde-ability. Redken's zero ammonia formula lifts up to 5 levels and tones in 1 easy step. Achieve perfectly neutralized blonde results with photo-finish shine and advanced protection for every strand....Additional Information.short nameDISCONTINUEDBrandsRedken
Can I use 10 vol developer with Shades EQ?
Shades EQ shades can be diluted with a clear shade to lessen or lighten the tone of any Shades EQ formula. › Shades EQ Gloss Crystal Clear mixes with Shades EQ Processing Solution and o ers no lift. › Shades EQ Cream Clear mixes with 10 volume Pro-oxide Cream Developer and o ers no lift.
Can I use Redken color gels as a toner?
After lightening with foilayage and highlights, try using Redken Color Gels Lacquers to tone out unwanted brassiness at the base. Example: If you lift a natural Level 3 client super light, you will get some Level 8 and Level 9 pieces. You'll also get some that are a bright Level 7 blorange.
How much developer do I use with Redken color gels?
Using a plastic utensil, mix 1 part COLOR GELS to 1 part COLOR GELS 20 volume Developer (the ratio should be 1 part hair-colorant to 1 part developer) in a plastic or glass container.
Can you use any developer with Redken Chromatics?
NOTE: No other developer may be substituted for Chromatics Oil in Cream Developer. To do so would cause unpredictable results.
How do you use Redken pro oxide cream developer?
In the bowl mix Color in a 1:1 ratio with Volume 20 Pro-oxide Cream Developer for up to 2 levels of lift. Apply with brush or bottle using a Traditional or Modern Virgin Application. Apply color generously using fine 1/4" diagonal partings. Cross-check application.
Can I use Shades EQ processing solution with color gels?
Yes. Shades EQ Gloss Violet Rose shades can be used to refresh previously colored strands and are also the perfect 1 to 1 match to Color Gels Lacquers Violet Rose shades.
REDKEN COLOR FUSION COLOR CONVERSION CHART
REDKEN ® SHADES EQ LIQUID COLOR CONVERSION CHART LumiShine 05RB Demi-Permanent Liquid Color Vero K-PAK Chrome Demi-Permanent Crème Color Redken Shades EQ Liquid LumiShine
COLOR CONVERSION CHART
COLOR CONVERSION CHART Kenra Professional® Permanent Creme Color LumiShine™ Permanent Crème Color Red Red 6RR 5RR (5.66) 4RR 5RR (5.66) + 6NRv (6.05)
Protected: 6 Shades EQ Toning Formulas We Can’t Get Enough Of
We love a good transformation, and this fall makeover created by Kelly Massias (@ kellymassiashair), an independent stylist from Grand Cayman, shows us the softer side of brunette. To transform her bleach-and-tone client into something more natural for the cooler months,
What Is The Best Way To Cover Gray Hair?
To boil it down, there are essentially two different types of color your colorist can use to cover gray hair—demi-permanent or permanent. Demi-permanent haircolor options, like Redken’s range of Shades EQ acidic haircolor, deliver non-permanent pigment that will gradually fade over time.
What Is Permanent Color?
On the other side of the spectrum is permanent color, which completely covers gray hair, delivering a more solid and uniform result, says Gribbin. His analogy? Picture a piece of wood. Staining it would have the same effect as demi-permanent color—you’d still be able to see the natural grain and there’d be variation in the shades and tone.
Remind Me: What is a Single Process Hair Color Application?
Gray coverage with permanent color often requires a single process haircolor service. With a single process service, your colorist will apply the color, let it sit and process, then rinse it off and you’re good to go. Compare that to a technique such as highlighting, where, post-rinse there’s usually another type of color (such as a gloss) applied.
How long does it take to heat up a color liftshade?
Up to 5 Extra lift for all levels 35–45 Warm heat for up to 15 minutes, then cool for 5 minutes at room temperature •Color Fusion Extra Liftshades are only intermixable with each other • Violet is for starting levels 7–10 • Light Neutralis for starting levels 6–10 • Blueis for starting levels 5–7 •Titanium is for starting levels 3–5 • Medium Neutralis for starting levels 1–5 • Greenis for starting levels 1–3
How much gray coverage is needed for a 20 volume?
Mix 1:1 20 volume Up to 2 50-100% Superior Gray Coverage 35 (up to 45 for more resistant hair) No heat •Use only with 20 volume Pro-oxideCream Developer •Do not use heat
How much volume to mix for gray hair?
Mix 1:1 10 volume Up to 1 Minimal Lift 35–45 No heat •For modern, multi-dimensional gray coverage, formulate with the N or Gb families 20 volume Up to 2 Standard Lift/Gray Coverage •For superior gray coverage on 50% or more gray hair, formulate with Cover Fusion
What diagonal to use to cross check?
Use the opposite diagonal to cross-check and ensure proper application. 4.
What is advanced performance color?
ADVANCED PERFORMANCE COLOR CREAM AMERICA’S FAVORITE PERMANENT COLORLarger dye molecules*** lock in color*With the exception of R5 shades **On chemically treated hair ***Than a traditional dye molecule
Where is the regrowth area in hair?
Regrowth or root area, approximately the first ½ inch of hairZONE 2: Mid-shaft area, begins where Zone 1 ends ZONE 3: Overly porous hair that extends past the shoulders
