Fix DIRECTV STREAM remote control issues
- Press and hold the DASH (–) and APPS buttons until you see the LED lights on the remote blink blue twice.
- Restart your DIRECTV STREAM device by pressing and releasing the red button on the side of the device.
- Press MENU on the remote.
- Arrow down to Settings and press SELECT.
- Go to Remote Control and press SELECT.
- Select Pair/Program Remote. Depending on your setup, this may be automatic, or you may have to enter codes into your remote.
How do I reprogram my DirecTV remote?
Receiver and remote control reset
- Press MENU on the remote.
- Arrow down to Settings and press SELECT .
- Go to Remote Control and press SELECT .
- Select Pair/Program Remote. Depending on your setup, this may be automatic, or you may have to enter codes into your remote. ...
Why does DirecTV remote stop working?
- Make sure none of the remote buttons are jammed.
- Reset the remote. …
- Clean the remote control terminals. …
- Replace with fresh batteries. …
- Perform a power reset on the TV.
How to reset DirecTV remote?
Reset a DIRECTV remote to factory settings
- Hold the MUTE and SELECT keys. When the green light on the remote top flashes twice, stop.
- Enter 981.
- Hold the MUTE and SELECT keys a second time until the green light on the remote flashes twice. Then, you can stop.
- Enter 961.
- Press the channel up key just one time.
- Press the ENTER key.
How to troubleshoot your DirecTV remote control?
Pair your remote and reset receiver
- Make sure nothing blocks the path between the receiver’s sensor or the remote’s emitter. ...
- Clean the remote control's emitter and the receiver’s sensor with a soft, lint-free cloth. ...
- Turn the brightness down on the TV.
See more
Why is my remote not working even with new batteries?
The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
How do you resync a directv remote?
Press and hold MUTE and ENTER at the same time on your remote. The screen displays Applying IR/RF Setup. The remote is synced.
How do I fix my remote not working?
For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control....Reset the remote control.Open the battery compartment cover and remove the batteries.Press and hold the Power button for three seconds.Insert the batteries again and close the battery compartment cover.
Is there a reset button on a directv remote?
To reset DIRECTV remotes to their default factory settings, press and hold the MUTE and SELECT buttons until the remote's light flashes three times. Then, enter 981 and press SELECT. The remote will flash four times to let you know it has been reset.
How do I refresh my directv remote to my receiver?
How to perform a refresh:Go to Account overview > My DIRECTV > Manage my plan.Choose Refresh service under Manage & learn about equipment.Select Refresh Receiver.Wait 5 minutes. Your DIRECTV service may be interrupted during the refresh process.
Why do remotes suddenly stop working?
There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.
How do you test a remote to see if it works?
Point the end of the remote control with the IR emitter to the viewfinder or screen of your camera/camcorder or smartphone. Press and hold one of the remote control buttons (green power button for certain newer Bluetooth remotes) . Look at the viewfinder or screen of your camera/camcorder or smartphone.
How do you check if a remote is working or not?
You can also test each of the buttons on the remote by pressing them one at a time and checking to see if you see a light from the emitter. NOTE: If you see a light when no button is pressed, one of the buttons on the remote may be stuck and preventing other buttons from working.
What to do if your direct TV remote is not responding?
If your remote is not responding, changing channels or adjusting the volume, make sure you have direct line of sight to the receiver. . Next, make sure your remote is set to control your DIRECTV receiver:
How to reset a DirectV receiver?
Most DIRECTV receivers have a red button inside the access card door or on the side of the receiver. Press the red button to restart it. If you can't locate the red button, unplug the receiver's power cord from the electrical outlet. Wait 15 seconds, then plug it back in.
How to change the input mode on a DirectV remote?
At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol. If your remote controls your receiver but doesn’t work on other devices, change the input mode. Slide the mode switch to the input symbol (for example TV, AV1, or AUX).
Where is the emitter on a remote?
The sensor is on the front of the receiver, and the emitter is on top of the remote.
What does it mean when your remote lights up green?
If you see: A solid green light - the batteries are strong. A fast blinking green light - the batteries are okay but may need to be replaced soon. A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.
What happens if your remote is blocked?
The remote uses light to send commands to the receiver. If the receiver is blocked, this can affect functionality of the remote. Also, tempered glass in some entertainment centers can interfere with the signal. For the best experience, the receiver should be free and clear of obstructions .
How to reset a receiver?
Resetting the receiver may restore remote functions. Near the access card is a red reset button, press and hold that until the receiver restarts.
Can you turn down the brightness on a TV?
Also, turning the brightness down on your TV can resolve most signal issues. The remote uses a “ light signal! and intense light can affect commands.
How to Get the Volume to Work on My DIRECTV Remote
Many of you may have asked yourself how to match the volume for my DIRECTV remote to work? But before we dive into the potential troubleshooting techniques you can try, let’s first find out why this problem occurs and discuss its primary cause here.
Fix DIRECTV Remote Volume Not Working
There are many simple ways to solve this problem that you can use at home. We recommend that you try this before purchasing a new remote or contacting support for DIRECTV technology.
Reprogram Genie Controller
If you reset your device, you may need to reprogram your genie controller. Luckily you can do this automatically or manually.
How to program a DirectV remote?
From the on-screen instructions, select Settings & Help > Settings > Remote Control > Program Remote. Choose the device (TV, audio, DVD, etc.) you want to program. If you don’t see your TV or device listed, use the DIRECTV code lookup tool to find the device’s five-digit code. Follow the on-screen instructions to finish programming your remote.
How to change the device on a DirectV remote?
The mode switch at the top of the remote determines which device it’s controlling. You can change the remote’s designated device by sliding the switch to your desired device setting (DIRECTV, AV1, AV2 and TV) to control the corresponding device.
How to get the green light on a remote?
Press and hold the MUTE and SELECT buttons at the same time until the green light at the top of your remote flashes twice.
What kind of remote is used for DirectV?
Before you keep reading, you’ll need to determine which remote model you own. There are two kinds of DIRECTV remotes ― the Universal Remote and the Genie® Remote. If you’re not sure what you have, you can compare your remote to the images below.
What is the code for a Genie remote?
Use the buttons on your Genie remote to enter the code 961.
How to turn on closed captioning on DirectV?
To turn on closed captioning, press INFO on your DIRECTV remote. Scroll right and select cc, then select Closed Captioning .
How many devices can you control with a universal remote?
Universal Remote. Your Universal Remote can control up to four devices, including TVs, game consoles, DVD players and more. This way, instead of keeping up with multiple remotes for multiple devices, you can easily control all of your devices with one remote. The mode switch at the top of the remote determines which device it’s controlling.
Get help with DIRECTV remote issues
Learn quick tips to fix problems with your Universal or Genie DIRECTV remote.
Remote buttons, batteries, and mode
Run your fingers across each button to make sure none are stuck in the pressed-down position.
Pair your remote and reset receiver
Go to your receiver and press the Guide button on the front panel. If it works, continue with the steps below. If not, make sure it’s powered on and troubleshoot your receiver.
