what do i need to fix a hole in the wall

• Sandpaper
• Putty knife
• Drywall patching compound (spackle or plaster)
• Wall hole patch
• Wet sponge of spray bottle
• Wall hole patch
• Wall texture spray
• Paint
• Paintbrush

How do you repair a hole in the wall?

If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

How to fill deep holes in a wall?

How to fill deep holes in wall. For deep holes, you’ll need a filler that works specifically for that depth as many are surface fillers. Deep fillers are tougher than hairline fillers and designed to stop the problem worsening. Clean the hole making sure you remove all loose materials. You can do this with the edge of a scraper or a fine brush.

How to repair a small hole in the wall?

Steps

1. Gather your tools and materials. Below are all of the tools and materials you'll need to complete this project.
2. Clean the area. This could get messy, so best to place a drop sheet down to protect your carpet. ...
3. Apply the patch. ...
4. Apply your plaster. ...
5. Wait for the first coat to dry. ...
6. Add another coat of plaster. ...
7. Paint. ...

How to fill a hole in your wall?

How to fill deep holes in wall

• Clean the hole making sure you remove all loose materials. ...
• Use a flat edged filling tool to push the filler into the crack. ...
• Smooth it with a wet knife.
• Check the instructions to see how long it takes to dry – this should typically be around one or two hours.
• Once dry, sand it down so it’s smooth with the wall.

More items...

What tools do I need to fix a hole in the wall?

Tools & Materials for Drywall RepairPutty knife.120-grit sandpaper.Carpenter's knife.Drywall saw.Broad knife.Trowel.Dust mask.Drill.More items...

What do I need to fill a hole in my wall?

Tiny nail and screw holes are the easiest to fix. Use a putty knife to fill them with spackling or wall joint compound. Allow the area to dry, then sand lightly. Anything larger must be covered with a bridging material for strength before patching compound can be applied.

What is the fastest way to fix a hole in the wall?

0:211:48How To Fix a Hole in the Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese plaster patches are super easy to attach. You simply peel off the back and stick it onto theMoreThese plaster patches are super easy to attach. You simply peel off the back and stick it onto the wall. Just smooth down the edges even grab your spatula to make sure it's really smooth.

What do you need to patch a big hole in the wall?

2:286:57How to patch and repair drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen use mesh drywall tape to go over the edges of your square. And spread joint compound over yourMoreThen use mesh drywall tape to go over the edges of your square. And spread joint compound over your tape edge just like we did for the patches earlier feathering away from the tape.

What kind of putty is used for drywall?

0:487:00How To Fix A Small Hole In Drywall Or Plaster With Putty (Spackling ...YouTubeStart of suggested clipEnd of suggested clipThis is pink spackling compound because it turns white when it has dried okay but spackling compoundMoreThis is pink spackling compound because it turns white when it has dried okay but spackling compound can be any color so don't be alarmed if yours is yellow.

What is a drywall patch?

0:033:09How to Repair Drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet it dry then add another coat of compound if necessary a great fix for holes 6 inches and smallerMoreLet it dry then add another coat of compound if necessary a great fix for holes 6 inches and smaller is called the California patch.

How do you use a wall repair kit?

0:523:19Drywall Repair: How to Fix a Hole in the Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou got to prepare the wall that's the pro trick get a knife you could get a razor knife or sharpMoreYou got to prepare the wall that's the pro trick get a knife you could get a razor knife or sharp knife. And just get all the loose stuff out of there now the patch has something to stick to.

How do you fix a big hole in a wall without drywall?

0:000:37How to Fix a Hole Without Drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you got a hole like this and you don't have a piece of drywall you can do it a coupleMoreSo if you got a hole like this and you don't have a piece of drywall you can do it a couple different ways you can pressure fit it or you can just put a nail on the side.

How do you fill a large deep hole in the wall?

0:141:55How to fill deep gaps in an internal wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore you start make sure you've covered the floor with a dust sheet then brush out the hole to getMoreBefore you start make sure you've covered the floor with a dust sheet then brush out the hole to get rid of the dust. This is really important as it helps the fillers stick more firmly as it dries.How to fill deep gaps in an internal wall - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fill a large deep hole in the wall?

How do you fill large holes in drywall?

2:4915:38How to Fix Holes in Drywall - 4 Easy Methods - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimilar with the first one you can buy a large patch that's a mesh adhesive patch like this one hereMoreSimilar with the first one you can buy a large patch that's a mesh adhesive patch like this one here we can actually just apply this eight by eight patch over the whole thing.How to Fix Holes in Drywall - 4 Easy Methods - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fill large holes in drywall?

How do you repair a hole in a plaster wall?

1:093:37How to Patch Holes in Plaster Walls | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd to cover the the cracks we're gonna use a mesh tape a drywall tape just goes like that. Use myMoreAnd to cover the the cracks we're gonna use a mesh tape a drywall tape just goes like that. Use my utility knife again to cut it. And we go over here at the top. Once again just press lightly.How to Patch Holes in Plaster Walls | This Old House - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you repair a hole in a plaster wall?

How to fix a hole in a cardboard box?

Start by cutting a thick piece of cardboard into a square that’s slightly larger than the hole you aim to fix. Poke two small holes through the center of the cardboard cutout and thread a short string in through one hole and out through the other.

How to fill a hole in a bathroom sink?

If you don’t have the right paste, grab a bar of soap from the bathroom instead. Simply dampen the surface of the soap with water, then rub the bar over the shallow hole until filled.

How to make a cardboard sanding board?

Push the cardboard through the wall hole, keeping the string ends facing you and ensuring that all corners sit behind intact drywall. Pull the strings tight to hold the cardboard in place. Mix together one tablespoon flour, one teaspoon salt, and a few drops of water to form a paste.

How to fill a small nail hole?

Believe it or not, toothpaste works wonders. When the paste dries, it forms a finish similar to spackle. Just squeeze the white paste ( not the blue gel) into the hole, and smooth it over with a putty knife.

How to make a wall with glue?

Use a toothpick to combine the two, then follow the steps below: Next, follow the steps below: Put on rubber gloves to be sure that this super-strength, fast-drying glue never comes in contact with your skin. Immediately apply the mixture directly to the wall. After it dries, start sanding the hard, plastic-like finish until it’s flush with ...

Is drywall indestructible?

Photo: fotosearch.com. While drywall is highly durable, it’s not indestructible. Over the years, interior walls take a beating, speckled with everything from nail nicks to doorknob dings. During your tenure as homeowner—or even as an apartment renter—you’re bound to end up with at least one unwanted hole in the wall.

What to use to repair small holes in a drywall wall?

Purchase spackling paste and a small putty knife if repairing a very small hole. Very small holes are usually caused by nails or screws and can be repaired easily and quickly with spackle.

How to get spackling paste off of wall?

Smooth the spackling paste out with your putty knife. The goal is to make the transition between the wall and the patch as seamless as possible. Using a damp cloth, wipe off any excess spackling paste that may have gotten on the wall around the hole.

What to do if you mess up a patch?

If you mess up the smoothness of the patch, feel free to start over with a bit more spackling paste on your putty knife.

What is the best tool to cut rough patches?

Use your razor knife to make small adjustments to the size of your patch. The sheetrock saw is better for rough in cuts.

What type of board do you use to patch a wet area?

If the area you need to patch is in an area that gets wet, then use a moisture/mold resistance green board.

How long does it take for a patch to dry?

Allow your patch to dry, which should take at least 24 hours. Keep applying thin layers until they are feathered out and smooth. Once dry, sand your patch as needed with a 220 grit sandpaper. Keep going until you cannot feel any seams between the patch and the existing wall.

What happens if lath is damaged?

If some of your lath is damaged so much that it will not hold up plaster, you will need to replace it.

How to make a ragged hole in a wall?

Start by cutting the ragged hole into a neat square or rectangle. Slip one of the 1x3s into the wall cavity and screw it to the edge of the cutout; be sure it overlaps into the hole by 1 1/4 in. Then attach the second 1x3 to the opposite side of the cutout.

How to hide joints in drywall?

Spread a thick coat of joint compound around the edges of the patch. Use the drywall knife to firmly press paper tape into the compound; this will hide the joints. After the compound has dried completely, sand it smooth and apply at least two more thin coats of compound.

How to blend metal patch into wall?

Note: Cover the metal patch with a coat of joint compound. Then gradually feather the edges to blend the patch into the wall.

Can you patch holes in drywall?

No matter how careful you are, live in a home long enough, and you'll find yourself with some holes in the walls to patch. And if a small section of wall is really badly stained or damaged, you'll have to cut out the affected area and cover the hole with a drywall patch.

How long does it take to repair a hole in a wall?

The working time required to complete the repair of the hole in the wall is about a half an hour to 45 minutes.

How long does it take for a wall patch to dry?

Make sure that the all edges of the wall patch are covered by patching compound. Tip – It might be a good idea to allow the compound to dry for 15-20 minutes before finishing covering the rest of the hole.

How long does it take for paint to dry on an incomplete wall?

Replace the lid on the can and clean the paintbrush. Allow the area to dry for 5-6 hours. Congratulations! You have just restored you once incomplete wall.

Can you apply patching compound to the center of a wall?

This will allow the compound to partially dry so that the wall patch does not move when applying patching compound to the center of the wall patch. Cover the rest of the wall patch, liberally applying compound until the entire wall patch is covered.

How to make a hole in drywall square?

Cut along the pencil lines with a knife/drywall saw to match the patch. Your hole should now be a square or rectangle shape.

How far away should screws be from drywall?

Keep the screws about 1 inch from the edges of the patch, making sure not to overtighten the screws and break through the paper face of the drywall.

How to smooth spackling compound?

Sand the dried spackling compound with a sanding sponge to smooth the surface, being careful not to over-sand so that the tape shows. Wipe or vacuum any sanding dust.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.

Is it hard to repair a hole in the wall?

From damage due to moving mishaps or wayward doorknobs, a hole in your wall is a fairly common problem. The good news is that it isn’t that hard to repair.

How to repair textured walls?

To better blend in the repair, you must texture the wall. Take the spray texture and read the instructions. Typically, you hold the can a foot away from the wall and sparingly spray the wall while moving the can. Next, you must quickly, and in one or two strokes, move your putty knife over the wet texture to make it as flat as the rest of your wall. Let dry completely before moving on to the next step.

What causes a hole in drywall?

Large holes in your drywall typically come from accidents such as a furniture leg or a human going through a wall. Oops. This method is excellent for holes larger than a few inches in diameter.

How thick is drywall?

Drywall is typically either 1/2″-inch or 5/8-inch thick. Make sure you measure the thickness of your drywall before making a purchase. You will not need much, so a 2-ft square piece like this will work great.

What knife do you use to smooth plaster?

Putty knives are not knives, but a flat piece of metal you will use to apply and smooth out the plaster. It is helpful to get a wide one, like this, to create a seamless patch.

How to apply spackle to a hole?

Don’t worry about getting spackle on undamaged parts of the wall because you can paint over it later. Wait until the spackle sets, usually around 30 minutes. Apply a thin layer of spackle over the surrounding area to blend it with the undamaged part of the wall.

Can you use a pen to outline drywall?

You can use any pencil, even a pen, as you will just be using this to outline the new drywall and the marking will be covered up by the new plaster and paint.

Can you sand off plaster?

Sand any excess plaster off the wall until matching smoothness with the rest of the wall. Don’t worry about sanding off any paint on the surrounding wall. You can repaint it later.

Small Dents and Dings

Scrape away loose debris from the hole. Cover the hole or dent with fast-drying spackle to bring the spackle level with the drywall surface and let it dry 24 hours -- or the time recommended by the manufacturer’s instructions. Sand smooth.

Popped Nail Heads

A popped nail isn't holding in the stud and backs out of the drywall, creating a popped nail head.

Small Holes

For small holes, like those created by a doorknob, a patch kit may be used.

Large Holes

For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

Corner Bead Patch

Corner bead is used where two pieces of drywall meet to form a corner. Corner bead is available in a variety of materials, including metal, paper and vinyl.

Finish the Repair

You're almost done. Here's where you make it look like nothing happened.

Repair Textured Drywall

Textured drywall is a bit more complicated, but still pretty simple to repair.

How to tape a wall with a knife?

Apply a coat of compound and tape to each joint. Thin the compound a bit with water to help embed the tape. Smooth the tape with the 6-in. knife, pulling out from the center toward each end. Squeeze some, but not all, of the compound out from under the tape so you don’t create a big hump on the wall. Immediately apply a light coating to the topside of the tape, tapering it out onto the wall.

Why do drywall screws pop up?

But drywall screws sometimes pop up too, as a result of damp framing that dries out and shrinks during the first year or two in new construction. The first step of how to patch a small hole in the wall is to drive nails back down using a nail set.

Can you use a second coat of compound on drywall?

And you can apply a second coat of compound as soon as the first hardens. You don't have to wait for it to dry completely as you complete a how to fix drywall project.