- You may need an adapter to attach the 3/4 inch (1.9 cm) end of the pipe connector to the 3/8 inch (1 cm) pipe end on the dryer.
- Make sure your connector is long enough to connect your dryer to the pipe in your wall.
- Do not attempt to reuse an old pipe connector! If you are replacing a previously installed gas dryer, throw away the old connector and replace it with a new one.
How do you install and hookup a gas dryer?
Your Independent Installer Will:
- Connect your new appliance to existing electrical/gas
- Test the new appliance to ensure proper operation
- Haul away the old appliance*
- Obtain necessary permits in most areas**
How much does it cost to install a gas dryer?
To estimate costs for your project:
- Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.
- Specify Project Size and Options Enter the number of "items" required for the project.
- Re-calculate Click the "Update" button.
How to connect a gas dryer?
Reuse a Soft Copper Coil
- For this dryer connection, we purchased a brass elbow with a 1/2-inch flare fitting on one side to match the 1/2-inch flare on the copper tubing, and a 3/8-inch female ...
- Coat threads with pipe thread compound or gas-rated Teflon tape before assembling.
- Align the copper tubing so the flare fits perfectly before threading on the flare nut.
Are my hookups for a gas or electric dryer?
If you have an existing dryer you can figure out whether it is electrical or gas by checking the model number. A gas dryer will usually have a ‘G’ within the series of letters, electrical dryers will have an ‘E’. You can also check the back and look for a gas line hook up.
Can I hook up a gas dryer myself?
Not only is self-installation a cheaper option, but it's also pretty simple to do, even for the non-DIY'ers. While the installation instructions for electric and gas dryers are a little different, both of them can be done with a few tools, a bit of patience and some great directions.
Can anyone hook up a gas dryer?
Gas dryers are best installed by professional plumbers. Although a lot of internet articles say it's a DIY task, a plumber's experience is a just price to pay in exchange for safety. A licensed plumber can identify the correct fitting for your new piping installation.
What kind of outlet do you need for a gas dryer?
A gas dryer produces heat by burning either natural gas or liquid propane (LP) gas, and it uses 120-volt electrical current merely to spin the dryer compartment and run the controls. A gas dryer plugs into an ordinary 120-volt electrical outlet, and it has a cord fitted with an ordinary appliance plug.
What parts do you need to hook up a dryer?
All clothes dryers need an electrical outlet for the motor; gas dryers use a conventional 120-volt receptacle, but electric dryers need a 240-volt receptacle to also supply power for the heating elements. A gas dryer involves connecting both a gas supply line and a vent to the appliance.
How much does it cost to run gas line for dryer?
The cost to run a gas line to a dryer is between $150 and $1,000, with an average cost of $352, which includes connecting the new line to the dryer. Gas dryers are more cost-efficient than electric dryers; however, the initial cost for a gas dryer is often higher, including the cost of the dryer.
What size gas line is needed for a gas dryer?
The gas line must include 1/8" NPT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas connection to the dryer. 1/2" IPS pipe is recommended. 3/8" approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.
Do gas dryers come with power cords?
Considerations. A gas dryer usually comes with a three-wire power cord that's equipped with a grounding conductor. If you don't install it properly, you could be in danger of an electrical shock.
Does a gas dryer use 110 or 220?
Compact electric dryers and gas-powered standard-size dryers employ 110 volts of electricity to do their job. Standard-size electric dryers, however, need 220 volts of electricity to get your clothing dry.
What is the difference between a 3-prong and 4 prong dryer plug?
In a 3-prong outlet, the ground and neutral wires are contained in the same prong. This has the potential to allow a current to find its way onto the ground wire. The 4-prong dryer cord is comprised of two hot wires, a neutral wire and a ground wire. This creates a separate return path for unused current.
Does a dryer come with vent hose?
The dryer does not come with one. You will get a dryer rack, a 1 foot hose, and a Y splitter to attach the dryer to the cold water line for the steam function. The vent comes straight out the back of the dryer by default.
Is a gas dryer better than electric?
Conclusion. While gas dryers do cost more upfront, they are almost always the better choice. They are more efficient, better on the environment, and cost less to run per load. With quicker drying cycles, you'll be able to run more loads in less time.
Does a dryer need a water outlet?
Yes you need a water line to the dryer. When it's installed, all you need is a t-type water spigot off the cold water supply.
How to increase efficiency of gas dryer?
Fasten the vent housing to the duct then place your hose clamp on and tighten. Keep your vent hose to the shortest length possible to increase the efficiency of your gas dryer.
How to fix a gas leak in a gas line?
Mix 50 percent water with 50 percent liquid dish soap. Put the solution on the gas connections you have just installed and then turn on the gas. If you see bubbles, it means you have a leak. Tighten and test again until the leak is gone.
How to remove gas cap from meter?
Step 1 - Turn Off the Gas and Electricity. You need to turn off the main gas supply right at the meter first. If the supply pipe has a cap, you will need a pipe wrench to remove the cap on the gas pipe where it comes out of the wall.
Is a gas dryer better than electric?
A gas dryer can be a good alternative to electric, despite the additional cost of the appliance itself. You can venture to offset some of that extra cost by installing the new dryer yourself.
How to shut off gas at meter?
Start by shutting off the gas at the meter using a wrench or at the nearest gas shutoff up stream of where the new gas work will happen. Measure and connect a series of gas pipes, fittings and nipples to the source of the gas to the rough location ...
Can you use a gas dryer in a house?
Resources: Richard recommends that if the electrical service to the house is insufficient, a gas dryer could be a more suitable option for installation. Working with gas can be extremely dangerous, so, as with any other gas appliances in the house, this type of work should only be handled by a licensed professional.
Where should a dryer be located?
The location of the dryer should be carefully chosen to be within reach of an electrical circuit, a ventilating duct and a gas supply line. All three are essentials for the dryer, and the location should be such that minimum extensions needs to be made to already existing pipes. More joints in a gas line increase the chances of a leakage.
How to fix a dryer that is leaking?
Slide the dryer into position after you have ensured that there are no leakages. Once in position, look at the angle of the pipe and the bends in it. Make sure that the pipe is not cramped up so awkwardly that it may affect gas supply or encourage leakage. If the pipe is cramped, you can circle it in loops and tie it to make it occupy less space.
How to join flexible pipes?
When joining the flexible pipes to the fittings, use threading tape on both the ends of the fitting and the pipe to ensure a leak-proof joint. Then, use a wrench to tighten the joints to safely seal the pipe onto the fitting.
Can gas lines leak?
More joints in a gas line increase the chances of a leakage. In addition, make sure that the gas line does not pass near flames or fire. In an event of leakage, this can be catastrophic before you even get the chance to detect the leak. Furthermore, the gas line should not pass through a location which would be harmed by leaking gas.
Is it dangerous to work with gas lines?
All work on gas lines should only be pursued after assuring that the gas valve is closed. Working with an open gas line can be extremely dangerous . Therefore, proper precaution is required to ensure that a simple carelessness does not lead to a heavy cost later.
Can you connect a gas line to a dryer?
Connecting a gas line for your dryer is a simple task that can easily be carried out on your own. However, unless necessary precautions are taken, the job can prove to be quite costly (much more than hiring a professional) due to harmful effects of gas leakage.
Gas Dryer Installation Cost Breakdown
The cost to install a gas dryer includes labor, supplies, and the appliance itself if you need to purchase a new one. If you’re swapping out an old gas dryer, you will also need to pay for appliance removal and debris disposal to get it off of your hands.
Gas Dryer
Gas dryers are more expensive than electric dryers upfront at $760 to $1,650, or about $900 on average. If you already have a gas dryer and you just need to move it, you obviously won’t need to factor this into your total appliance installation cost, but it can be helpful to know if you’re starting fresh with a new dryer.
Labor
The amount you pay in labor will ultimately depend on who you hire and whether or not you have an existing gas line and hookup for your gas dryer. Professionals typically charge between $50 and $100 per hour to install a gas dryer, a job that typically takes two hours. Running a gas line costs an extra $260 to $800.
Supplies
Supplies will be between $30 and $50 if you already have a gas line ready to go. If you hire someone to run a gas line for you, supplies may increase to $100 or more depending on how long the gas line needs to be. If the person you hire needs to repair drywall after they install the pipe, costs can reach upwards of $550.
Appliance Removal
If you’re replacing your old dryer with a new gas one, you will have to pay beyond installation for appliance removal. Detaching the appliance from the wall and hookups and breaking it into smaller pieces to remove it completely will take about an hour and cost between $50 and $100.
Debris Disposal
After someone properly removes your old dryer, they will need to dispose of it legally. Each state has different rules about disposing of machinery, so costs vary. Typically, homeowners will need to pay a fee of $20 to $50 for disposal.
How Much Does It Cost to Install a Gas Dryer Yourself?
We recommend hiring a professional to help with any work involving gas (safety first!), but you technically can install a gas dryer yourself. Keep in mind that your gas dryer will have to meet specific codes and standards.
How to reduce 3/4 inch female pipe thread?
If necessary, use a bushing to reduce the existing 3/4-inch female pipe thread to 1/2 inch. Use a 90-degree elbow at the stove to avoid kinking the gas tubing when you push the stove against the wall. Before you replace an old valve, find and turn off the main gas valve to the house.
What size flare fittings are used for soft copper?
Common sizes of flare fittings are 3/8 inch, 1/2 inch, and 5/8 inch.
What to do if your dryer smells like gas?
If your house smells like gas after you’ve disconnected your dryer, call a professional to come out and examine the situation. Don’t put this off, as doing so will put everyone living in your home at risk.
When cleaning a dryer vent, should you disconnect it?
Before moving the dryer to a new location in your home. Essentially, any time you are moving your dryer, taking it apart, or doing any sort of repair or maintenance, you’ll want to disconnect it from the gas and electrical sources.
How to clean lint from dryer?
If there are clothes in your dryer, take them out. Then, empty the lint tray and clean up any lint from the top and back of the dryer, and vacuum the floor. This will make the dryer easier to move, eliminate a fire hazard, and make clean up easier when you’re finished.
Can a gas leak cause a fire?
You can do this by locating the gas valve to your home and shutting it off until you are finished working. A gas leak is a huge household hazard that could cause a fire or lead to you and your loved ones developing asphyxia, which is caused by a lack of oxygen and can be deadly.