Required Materials for this how to change a toilet Project
- Brass toilet bolts
- Caulk
- Flexible water supply
- Plastic shims
- Toilet flange
- Wax ring
Full Answer
How to replace a toilet?
How to Replace a Toilet 1 Measure for a New Toilet. Measure from your back wall to the closet bolts that secure the toilet to the floor. ... 2 Remove the Old Toilet. Once you have the new toilet, start removing the old one. ... 3 Install the New Toilet. Once you've ensured the flange is in good shape, the next step is toilet installation. ...
How do you fix a toilet that won't flush?
Remove the Old Toilet. 1 Step 1: Remove the Water. Turn off the water supply line and flush the water from the tank. Remove the rest of the water in the tank with a sponge. 2 Step 2: Disconnect the Water Lines. 3 Step 3: Uninstall the Bowl. 4 Step 4: Remove the Old Wax and Wax Ring. 5 Step 5: Repair the Flange.
How do I install a new toilet in my bathroom?
To install a new toilet, first turn off the water supply and remove the old toilet. Fit a new seal around the drain hole in the floor and make sure it’s tight. Then, lift the toilet onto the floor bolts and jiggle it a bit to seal the drainage hole. Level the toilet base, then tighten the bolts and cap them.
What should I look for when buying a new toilet?
Be sure you have toilet flange bolts and a new wax ring for sealing your toilet to the bathroom floor. These normally come in the box when you purchase a new toilet. Also, if you didn’t get any toilet flange bolts with your new toilet, go to a hardware store or home center and purchase a pair of those.
What do you need for a toilet replacement?
Required Materials for this how to change a toilet ProjectBrass toilet bolts.Caulk.Flexible water supply.Plastic shims.Toilet flange.Wax ring.
What parts do you need to install a toilet?
Parts Needed for Toilet ReplacementCloset Bolts.Closet Bolt Covers.Wax Bowl Ring.Closet Flange Extension Ring.Toilet Flapper.Toilet Tank Lever.Oatey Liquilock (optional)
Can I replace a toilet myself?
If you're an experienced DIYer with plumbing knowledge and the required tools, installing a toilet yourself may be a great option. Not only will you save money, but you'll have the satisfaction of completing the toilet installation yourself.
What tools and equipment are necessary to replace a toilet?
Some hardware stores and plumbing supply shops will loan or rent plumbing tools that you only use once in a while, but you should buy an adjustable wrench, a pair of pliers and several screwdrivers, both Phillips head and regular types, a plunger and a toilet auger. Then buy the rest as the need arises.
Does a new toilet come with a flange?
When you purchase a new toilet, it should come with most of the parts that you'll need. Check the box and make sure it includes brass closet bolts (to connect the toilet to the flange), and a gasket for connecting the tank to the base, a wax ring, a fill valve, flush valve and flapper.
Do you need to replace flange when replacing toilet?
If you notice a lot of water pooling at the base of your toilet and inspect to find that your flange is cracked or broken, it's time for a replacement. Make sure to properly measure your drain pipe and drain to ensure that you choose a replacement flange kit that is the right size.
How much does Home Depot charge to install a toilet?
The Home Depot charges a standard fee of $99 for toilet installation. The charges are inclusive of the cost of the toilet, labor, and materials. However, the total cost will vary depending on the specific model of toilet you choose, as well as any additional features or services you request.
Are toilets universal?
As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don't project out as much as elongated, and then there are variations within the round and elongated categories as well.
Should you caulk around a toilet?
Caulk Keeps the Toilet Secure Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?
How difficult is it to replace a toilet?
Replacing and installing a new toilet isn't as hard as it sounds. All you need are a few hours, a helper and the right tools and toilet parts for the job.
What is the labor cost to install a toilet?
Toilet installation costs range from $224 to $532, with the national average at $372. Plumbers can charge anywhere from $65 to $350 per hour for labor costs.
How long does it take a plumber to replace a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don't have a lot of DIY experience, you might want to add an hour or two to that timeframe.
What is the labor cost to install a toilet?
Toilet installation costs range from $224 to $532, with the national average at $372. Plumbers can charge anywhere from $65 to $350 per hour for labor costs.
How much does Home Depot charge to install a toilet?
The Home Depot charges a standard fee of $99 for toilet installation. The charges are inclusive of the cost of the toilet, labor, and materials. However, the total cost will vary depending on the specific model of toilet you choose, as well as any additional features or services you request.
How do you assemble a toilet?
12:4316:03How To Assemble a Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes you can get it tight enough just by you know just by turning these little nuts down here.MoreSometimes you can get it tight enough just by you know just by turning these little nuts down here. And if you can't these ones have a phillips or a star-shaped screwdriver drive in those heads.
How do you install a new toilet?
1:573:10How To Replace or Install a Toilet | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipPart lift the ball up. And line the toilet up over the anchor bolts. Once the bolts are fed throughMorePart lift the ball up. And line the toilet up over the anchor bolts. Once the bolts are fed through the hose rock the bone back and forth to seek the wax ring. And then hand tighten the nuts.
What are the parts of a toilet?
A toilet consists of two parts: the tank and the body . The tank is on top, so you must remove it before the body. A. Turn off the water supply leading to the toilet. You are trying to remove all water from the toilet before removing it, which would not be possible with the water on. The valve that controls the water supply is usually behind ...
Can you drain a oatey tank?
It is impossible to drain it all by flushing, but any water left in the tank will make a mess when you remove the tank. You could use a rag to soak up water or pour in some Oatey Liquilock Gel to solidify any remaining water. It sets in 4 minutes and won't leave you with any nasty rags to wash or throw away.
Can you replace a wax ring on a toilet?
This can be done by scraping it off with a putty knife. Wax rings must always be replaced with a new toilet, since they mold to the shapes of the toilet and flange during installation. The picture to the right shows what the old wax ring may look like. As you can see, it is not fit to be used again.
Can you replace a toilet in an afternoon?
Toilet replacement may seem like a messy or tedious job, but it doesn't need to be. If you go step-by-step, replacing a toilet is a simple process that can easily be completed in an afternoon! This guide will show you how to replace a toilet and what parts you will need.
How far apart should a toilet be from the wall?
1. Measure the distance from the wall to the floor bolts before removing. Standard toilets have a measurement of 12" from the wall to the floor bolts. If your toilet measures 12", you can expect to buy any standard toilet and install it comfortably in the existing location without much hassle.
How to get rid of water in toilet bowl?
Remove any leftover water in the toilet bowl and toilet basin. You can use a small cup at first, and then switch over to a heavy-duty sponge. Dump the excess water into a bucket and dispose of it somewhere safe. ...
How many people edit wikihow?
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 15 people, some anonymous, worked to edit and improve it over time. This article has been viewed 184,806 times.
How many references are there in WikiHow?
To create this article, 15 people, some anonymous, worked to edit and improve it over time. There are 8 references cited in this article, which can be found at the bottom of the page.
Is it easier to install a toilet or replace it?
Learn more... Installing a new toilet is a lot easier than you may think. In fact, many homeowners choose to remove their old toilet and replace it with a new one without the help of a handyman or plumber. If you do decide to making installing a toilet your new DIY project, you should know the basics. This article will teach you how ...
How to secure pick up stix to toilet?
To secure it to the toilet, just fit one end of the bar under the rim of the toilet bowl and then compress the bar enough to slip the other end under the rim on the opposite side. You can position the Pick Up Stix from side to side of the bowl or from front to back, whichever works best for your grip. “The Pick Up Stix is basically ...
What happens when you move a toilet?
Any little tilt or wobble of the toilet as you move it will cause that water to drain out onto the floor. To deal with this, plumbers will often place a large utility pan on a flat dolly. When they replace a toilet, they’ll set the old one in the pan and then roll the whole thing out of the house.
Can you put a toilet bowl upside down?
Alternately, you can turn the new toilet bowl upside down (or on its side) and affix the wax ring to the underside of the drain before lifting and positioning the bowl over the flange in the floor.
Can a toilet leak after a decade?
After a decade or so, heavy lime deposits can build up, resulting in clogging or slow flushing, and the seals between the tank and the bowl can harden, crack, and begin to leak. Even if a toilet is still in good working order, homeowners often upgrade to a model that blends better with a bathroom remodel or features the newest technology.
Can porcelain tank lids break?
Not only do porcelain tank lids break easily, they can chip and dent flooring as well. While professional plumbers are wise to this, household DIYers often make the mistake of leaving the tank lid on and end up having to clean up a shattered lid or repair damaged flooring.
Is it hard to replace a toilet?
Replacing a toilet is an unpleasant task, not because it’s technically difficult—it’s not—but because toilets are heavy and unwieldy, and no one really wants to get up close and personal. Daniel O’Brian, the technical expert for the online plumbing retailer SupplyHouse.com, has the secret to making this job easier: a simple new tool called ...
Can you leave the lid on a toilet?
DON’T leave the tank lid on when you move the toilet. The tank lid is not fastened to the top of the tank—tilt the commode to either side while carrying it, and the heavy porcelain lid is likely to slip off and fall. Not only do porcelain tank lids break easily, they can chip and dent flooring as well.
How to make a toilet easier to install?
That means you have to cut off the protruding ends later with a hacksaw. But first connect the water line, flush the toilet a couple of times and check for leaks. Leaving the bolts uncut until you’ve done these final checks lets you easily remove and reset the toilet if you find any problems.
What does a toilet bolt look like?
Some metal toilet bolts have a yellowish zinc coating that makes them look like brass. So check the label and make sure you’re getting brass bolts and nuts. They won’t rust away and they’re easier to cut off later. If you need to reanchor the toilet flange, buy stainless steel screws. They won’t corrode like steel or break off like brass while you’re driving them.
Why does my toilet rock?
If the flange is loose or damaged , the toilet will rock. And a rocking toilet will distort the wax ring and cause leaks. So be sure to scrape off the old wax ring and inspect the flange. Here are some solutions for broken, corroded or loose flanges.
How to fix rot under toilet flange?
The best solution depends on the extent of the rot. If the rot is only under the flange, use an ear-type repair ring. The ears let you drive screws into firm wood farther away from the flange. Before you install this kind of ring, hold it up to the drain horn on the underside of the toilet.
How to check rough in on a toilet?
To check the rough-in, just measure from the wall to the toilet’s hold-down bolts. If that measurement (plus the thickness of the baseboard) isn’t approximately 12 in., toilet shopping will be a bit harder. Most home centers carry only one or two 10-in. models and no 14-in. models.
Can you set a toilet on a new bolt?
Setting a toilet onto the new bolts can be the most frustrating part of the whole installing a toilet job. The bolts slip and tip as you’re straining to align them with the holes in the toilet. And each time you miss, you risk crushing or shifting the wax ring.
How to get rid of water in toilet bowl?
Flush your toilet and keep the handle down to empty the toilet of water. You’ll be left with some water in the tank and some in the bowl. Use a large sponge and bucket to remove the remaining water in the tank (Image 2). You can use the same method to remove the excess water in the bowl, but you don’t have to.
How long is a toilet seat?
If you have a small bathroom, though, you may want to select a standard toilet seat/bowl length. Traditional toilet seats are 15 inches high.
Is a comfort height toilet better for elderly people?
Comfort height toilets can be a better choice for the elderly and tall folks. Next, you’ll want to make sure your toilet will fit into place by measuring the distance from the wall to the closet bolts holding your toilet to the floor. Select a toilet with the matching dimensions.
What to do if water leaks from water supply?
If water is leaking from the water supply, it may need to be tightened more. If this doesn’t work, wrap the positive end of the connection with some plumber’s tape. This should do the trick.
How to separate a tank from a bowl?
To separate the tank from the bowl, unscrew the bolts that attach the two pieces, then lift the tank off and carry it away, or set it aside on some old towels or a panel of cardboard.
Where to put wax ring on toilet?
First, place a new wax ring (one should come with your purchase) around the hole at the bottom of the toilet , known as the water horn. Make sure the tapered side of the seal is the one facing the toilet.
