What do the Scotts broadcast spreader numbers mean?
The Scotts broadcast spreader number represents the number of pounds fertilizer placed over 1000 sq ft. The number of fertilizer spreaders is the setting that places the spreader for adequate distribution of fertilizer.
What do the numbers on a communication spreader mean?
You will know all facts about that what do the numbers on a communication spreader mean. The Scotts broadcast spreader number represents the number of pounds fertilizer placed over 1000 sq ft. The number of fertilizer spreaders is the setting that places the spreader for adequate distribution of fertilizer.
How do I determine the spreader settings?
By checking the product conversation chart, you can determine the spreader settings. What does the number mean on a fertilizer spreader? You will see that there are some numbers on a fertilizer spreader.
How to use a Scotts drop spreader?
We tested various scotts products with the drop spreader. For the Scotts, mow it less, cut and feed, fix the spreader to a 5. Setting it to five will spread 30 grams of product per square meter. While using the fertilizers, evergreen autumn, and organic choice, we fixed the settings to 7.5. You can also set it to 8.25 for the organic option.
See 7 key topics from this page & related content
How do you determine spreader settings?
Calibrating Your SpreaderDivide 100 by the square foot the bag of fertilizer covers.Multiply the weight of the bag by this number.The answer is the amount of fertilizer needed to cover 100 sq. ft.Place this amount in the spreader.Mark off a 10 ft. x 10 ft. area.Apply using the suggested setting.
What number should fertilizer spreader be on?
Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.
What are the settings on a Scotts drop spreader?
0:352:01How to Calibrate Your Scotts® Drop Spreader - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe number in this little window if you have a Scotts to our filter classic drop spreader adjust theMoreThe number in this little window if you have a Scotts to our filter classic drop spreader adjust the setting to 8. If you have a Scotts Accu green drop spreader then adjust the setting to 6.
What do the spreader settings mean?
A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. The application rate is defined as the amount of material applied per unit area of land.
What are the numbers on my spreader?
The numbers on a spreader tell you how much fertilizer or product will be applied over a certain amount of land. You'll use these numbers, often guided by the instructions on the fertilizer, to determine the most effective way to spread the product.
What setting should Scotts spreader grass be set at?
When using a Scotts rotary spreader, a setting of 6 1/4 is recommended for overseeding. Use the same setting for new lawns or on bare spot repairs; however, Scotts recommends going over the area twice. With a Scotts drop spreader, use a setting of 9 1/2 when overseeding and 15 for new lawns or to patch bare spots.
What setting should I use for grass seed spreader?
When using a handheld broadcast spreader, choose a setting of 4 when overseeding or planting a bare lawn, although two perpendicular passes will produce the best results for new lawns. For drop spreaders, use a setting of 9 3/4 for overseeding and a bare lawn setting of 14.
What setting should I use on Scotts spreader for grass seed?
For application using a pushed broadcast spreader, Scotts recommends a setting of 5 1/2 when overseeding and a bare-lawn setting of 8 1/4. With a handheld broadcast spreader, Scotts recommends a setting of 4 when overseeding or seeding a new lawn but suggests that the sower make two perpendicular passes for new areas.
How do you use a fertilizer spreader?
1:325:35How to use a lawn spreader like a pro - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis will eliminate you moving the bag one more time which is gonna save your back but the moreMoreThis will eliminate you moving the bag one more time which is gonna save your back but the more important reason to do it this way is by opening the bag while you're on top of the spreader.
How do you calibrate fertilizer spreader?
1:434:12How To Calibrate A Broadcast Spreader - YouTubeYouTubeStart of suggested clipEnd of suggested clipAdd enough fertilizer to the spreader hopper to allow you to make a short run down the test area setMoreAdd enough fertilizer to the spreader hopper to allow you to make a short run down the test area set the spreader to the middle setting and start spreading at your normal walking speed.
What setting should I set the Edgeguard Mini for fertilizer?
When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13. For overseeding applications, set the dial to 7 1/2. Using your Edgeguard Mini broadcast spreader correctly will ensure accurate, even coverage and reduce wasting costly seed.