What are decorative lighting fixtures?
Decorative fixtures are meant to be seen, which means their brightness should be kept low enough to avoid glare. Hanging chandeliers, pendant lighting, swag style plug-in chandeliers, and multi light pendant designs are among the many examples of these types of fixtures. Film that reflects visible light and transmits infrared light.
What is the outer covering of a light bulb called?
The everyday term for an incandescent lamp. Also refers to the outer glass envelope of the lamp. Multiple wires arranged in a common covering of insulating plastic or other materials, used as an electrical conductor. Glass consisting of a layer of clear glass fused to a layer of opal or other tinted glass.
What is a light fixture made out of?
They are typically made of glass or plastic and are used on the bottom or sides of a light fixture. They are typically used in offices or schools where there is a lower ceiling height.
What is a U shaped light fixture called?
More commonly referred to as “Halogen” lighting. Linear, double-ended fluorescent lamp, usually T8 or T12, bent into a “U” shape. Fixtures which are placed under a cabinet or room recess to provide task and accent lighting.
What is the canopy part of a light fixture?
The canopy is the decorative plate, typically round, that rests against the ceiling and covers the electrical box. A stem mount pendant can be hung from a standard canopy, a hang-straight canopy, or a heavy-duty canopy.
How do you replace a glass shade on a light fixture?
For most people, the process of changing a lamp shade is simple: just measure the fitter size, order a corresponding shade, unscrew the thumb screws holding the original shade in place, switch out the shades, then replace the thumb screws. That's it!
What are the different parts of a ceiling light called?
What are the parts of a ceiling light called? Your ceiling light consists of the lamp, lamp holder, reflector, junction, wiring, lens, and trim.
What is the piece called that holds a light bulb?
A lightbulb socket, lightbulb holder, light socket, lamp socket or lamp holder is a device which mechanically supports and provides electrical connections for a compatible electric lamp base.
What is the glass shade on a chandelier called?
Arm Socket GlassThe most common parts of the chandelier that hold lights are called: Arm. Socket. Glass or shade.
Can a broken glass lamp shade be repaired?
End of dialog window. Most stained glass lampshades can be repaired but the cost varies dramatically depending on the type of shade and the severity of the damage.
What are the three components of light?
The three components of lightAmbient lighting. Ambient lighting is evenly distributed and illuminates entire rooms. ... Zone lighting. Zone lighting provides a large amount of light where it is needed for specific activities, e.g. reading, eating, working or looking at pictures or paintings. ... Mood lighting.
What is a flange on a light fixture?
A flanged trim is designed to overlay the surface of the ceiling. A flangeless trim is designed to sit flush with the surface of the ceiling.
What is the top of a light fitting called?
The part of the lamp or light bulb that connects into the light fitting is generally known either as the “cap” or “base”. Caps provide the electrical contact to conduct electricity to the light bulb but it also helps to secure the light bulb into its fitting.
What are the 6 parts of a light bulb?
Diagram showing the major parts of a modern incandescent light bulb.Glass bulb.Inert gas.Tungsten filament.Contact wire (goes to foot)Contact wire (goes to base)Support wires.Glass mount/support.Base contact wire.More items...
What is a light connector?
0:171:32Soft Strip - Snap & Light Connector - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are four types of basic connectors straight L T. And X connectors each connector provides aMoreThere are four types of basic connectors straight L T. And X connectors each connector provides a physical and electrical connection between two ends of LED soft strip.
What surrounds a light bulb?
Glass envelope - the thin layer of glass that surrounds the light bulb mechanism and the inert gases. Glass fuse enclosure - glass that insulates the bulb's fuses - located in the stem of the bulb.
How do you remove a glass shade from a pendant light?
1. Hold onto the glass, carefully reach inside your pendant from below and unscrew the lightbulb from the threaded socket. Next, unscrew the shade ring to fully release the glass from the socket and cord.
How do you remove glass lamp shades?
Hold the glass shade securely up while turning the metal nub or finial counterclockwise to remove it, like a screw. Some models may require a screwdriver. Catch the metal parts in your hand; there may be a washer as well. Gently pull the glass shade downward off the metal post holding it in place.
How do you remove a light fixture cover?
0:422:54How to remove ceiling light cover - 2 main types - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd back it off so all we wanted to do push up on the cover unscrew that to the left so lefty looseyMoreAnd back it off so all we wanted to do push up on the cover unscrew that to the left so lefty loosey righty tighty nice and easy way to remember.
How do you remove the glass shade from a ceiling fan?
0:341:26Ceiling Fan Glass Cover Removal - Light Bulb Glass Dome - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust below where it meets the fan tap in an anti-clockwise. Direction all the way around the glassMoreJust below where it meets the fan tap in an anti-clockwise. Direction all the way around the glass while attempting to rotate it this should loosen the glass. And allow it to be removed without.
How does a slide dimmer work?
Slide dimmers operate via a slide toggle, providing a full-range of manual dimming control. Some are equipped with a touch-button that allows you to return to the previous lighting level. Others have an indicator light that glows in the dark for easy location.
What is an alabaster shade?
Alabaster. Shades can be made of either alabaster stone or alabaster glass. Alabaster stone is much like marble in that it is quarried, cut and made into shades and bowls. It creates a warm, rich look, with each piece being completely unique.
What is an adjustable light?
Adjustables are accent lights that can be aimed. The professional term is “adjustable accent light.” In practice, most of the fixtures used for accent lighting are adjustable in some fashion.
How many pots can a pot rack hold?
Depending on their size, pot rack chandelier designs can accommodate up to a dozen hanging pots or pans.
What is ADA bracket?
Wall-mounted fixtures that extend less than 4″ from the wall comply with the Americans with Disabilities Act and are usually called ADA brackets. ADA wall lighting comes in a wide variety of styles and finishes, and is frequently used in hallways and bathrooms where space is at a premium. Learn more with our online article A Guide to ADA Compliant Lighting.
How many blades does a ceiling fan have?
Move the airflow in a ceiling or desktop fan. Blades are made of plywood, laminated woods or plastic. A ceiling fan may have from one to five blades, depending on the style of the design. View all the ceiling fan styles we have to offer.
What is directional lighting?
Localized and directional lighting used to highlight, focus attention or dramatize a room or outdoor space. As part of a decorating scheme, it is used to spotlight paintings, houseplants and other possessions, or to highlight the texture of a wall, drapery or outside landscaping.
light bulb
an object that produces light, especially one that fits into an electric light. A light bulb is often simply called a bulb.
light fitting
the part of a light that is fixed to the wall or ceiling, where you put the light bulb
What is a junction box?
Junction box: Connection point for wires from fixture to fixture and switch box to fixture
What is ground wire?
Ground wire: Wire (that carries no current) that runs from the fixture to metal attached to nonmetal material to ground the current in case of a short (Ground wire is usually bare copper or green). GFI: Ground-fault interrupter: A sensing device that shuts down the electricity in the case of a shock hazard.
What is discharge lamp?
Discharge lamp: Light bulb which incorporates an electronic discharge through a gas or vapor
What is color rendition index?
Color rendition index: A measure of the effect of a particular kind of light bulb on a colored surface (the larger the number, the truer to the color in real sunlight; measured between 1 and 100)
What is a tungsten filament?
Filament: Thin tungsten wire that emits light when heated by an electrical current. Finial: Decorative item with threaded base used to secure a lampshade to a harp and “finish” the look of a table or floor lamp. Fish tape: Extending metal tape with a hook on the end used to pull wires through a wall.
What is fishing tape?
Fish tape: Extending metal tape with a hook on the end used to pull wires through a wall
What are knockouts in electrical?
Knockouts: Tabs that can be removed from electrical box or fixture to make wiring connections
What is polycarbonate lens?
Polycarbonate – These lenses are extremely durable and are ideal for harsh environments. They are typically used with vapor tight light fixtures used in wet or dusty areas. Here are some examples of fixtures that use polycarbonite lenses: Parabolic Louver – These are baffles that utilize an open grid pattern with parabolic reflectors in each cell ...
What is a parabolic louver?
Parabolic Louver – These are baffles that utilize an open grid pattern with parabolic reflectors in each cell of the grid. They are excellent for directing light downward and reducing glare from the fixture. Size and depth of a louver will affect light output and distribution. You May Also Like...
Why use a shielded light fixture?
The reasons to use them are as follows: Reduce glare. Diffuse light. Protect and/or hide lamps. Enhance fixture appearance. There are three different types of shielded light fixtures: Diffuser – This is a translucent or semi-transparent cover that spreads out or scatters light.
What is a diffuser light?
Using a diffuser will control brightness and give off a soft light relative to the lamps being used. They are typically made of glass or plastic and are used on the bottom or sides of a light fixture. They are typically used in offices or schools where there is a lower ceiling height.
What are some examples of diffusers?
Here are some examples of fixtures that use diffusers: Lens – This is a clear or transparent cover. Two types or commonly used lenses are as follows: Pris matic – These are shaped with an arrangement of small refractive components on one side for excellent light diffusion and glare reduction.
What is the light bearing part of a chandelier called?
The light-bearing part of a chandelier also sometimes known as a branch.
What is an armback?
An armback is the visible and or decorative element that supports the arm from the point where it springs off the backplate (in the case of a sconce) or body (in the case of a chandelier) and conceals the arm-receiver plate.
What is a ball in a chandelier?
A spherical or ovoid body. In a baroque chandelier column, the ball is commonly the focal point and single largest element.
What is glass cutting back?
Glass having the edges cut back at an angle to the main plane surface.
What is foliate motif?
A foliate motif usually consisting of small two or three lobed flowers, often graduated in size, arrayed in a garland.
What is a metal strip?
A thin metal strip, usually with pierced or embossed decoration, wrapped around a glass or contrasting metal substrate.
What is a bag of crystals?
A bag of crystal drops formed by strings hanging from a circular frame and looped back into the center underneath, associated especially with early American crystal and regency style crystal chandeliers.
What are chandelier arms?
Chandelier Arms: The chandelier arms are what extend out from the main body of the chandelier and on which the chandelier candles are placed. Chandelier arms can be of different types such as an S shaped arm, a fluted chandelier arm, and a rope chandelier arm. These are also available in different materials such as crystal, brass, ...
What can be used to collect wax drippings from real candles?
Bobeches which can be used to collect the wax drippings of real candles or to enhance the overall look of a chandelier. Collars, canopies, and chains from which to suspend your chandelier from the ceiling. Chandelier shades to cover the lamps. Tweet.
What is the main part of a chandelier?
Crystals: The main part of a crystal chandelier is certainly the crystal itself . Crystals that are used in chandeliers can be one of many types.
What is between arm festoon?
Between-arm festoons: Double strands of crystal that drape from the top of the crystal chandelier to beneath the bobeches of the arms.
What is an almond pendant?
Almond: A pendant that is shaped like a faceted almond. More frequently called a pear, but we like almond better. Arm: Crystal or metal piece that encases the wire and that supports the electrical socket. These may also be called “branches”. Arm-to-arm festoons: Single strands of crystals that drape from one arm to the next arm.
What is flush mount chandelier?
Flush-mount: A flush mount chandelier will mount directly on the ceiling without any chain. French pendalogue: Often known as “paper doll” or “leaf” pendant. These are the intricately shaped pendants that are most frequently found on French style chandeliers. Full-cut: Refers to how a pendant may be cut.
What does "half cut" mean?
Half-cut: Refers to how a pendant may be cut. If it is half-cut, it will lay flat on a table.
What is the metal fitting on both ends of a crystal arm or on the end of a spire or scroll?
Ferrule: The metal fittings on both ends of a crystal arm or on the end of a spire or scroll. Plaster is used to hold a crystal piece to the ferrule.
What is the bottom of a chandelier?
Bottom: The crystal bobeches and hardware that are joined together to form one piece that covers the electrical connections at the bottom of the chandelier.
When did Swarovski Strass retire?
Swarovski Strass: The brand name for the premium crystal by Swarovski. Retired in 2020.
Who are the certified experts?from experts-exchange.com
Our certified Experts are CTOs, CISOs, and Technical Architects who answer questions, write articles, and produce videos on Experts Exchange. 99% of them have full time tech jobs - they volunteer their time to help other people in the technology industry learn and succeed.
How quickly will I get my solution?from experts-exchange.com
We can't guarantee quick solutions - Experts Exchange isn't a help desk. We're a community of IT professionals committed to sharing knowledge. Our experts volunteer their time to help other people in the technology industry learn and succeed.
How to loosen a bulb cover?from quora.com
There are 3 thumb screws loosen 2 of them hang on the cover before loosening them . Take the cover down and replace the bulbs . Put the cover up and tighten the 2 screws and presso . I don't loosen the 3 rd one because I use it as a guide and you don't have cross your hands
What to wear to remove glass cover?from littleupgrades.com
To help with traction, or to keep your hands protected and clean, you may want to wear gloves to help you remove the glass cover. For example, you could use some of those mechanic gloves , or gardening gloves to give yourself some extra traction.
Why do you need a flashlight?from quora.com
You need a flashlight (headlight preferred to have both hands free) because the light fixture should be off.
How to get a light cover for a light?from littleupgrades.com
1. Get a Sturdy Step Ladder, Stool, etc. Unless you’re Shaquille O’Neal, then you’ll want something to stand on so you can reach the light cover. A stepping stool or small self-standing ladder would be ideal. I don’t have either of those on hand at the moment, so I’ve used a sturdy chair. 2.
What direction do you turn a light fixture?from quora.com
There will be little finger nuts to loosen, usually 3, that if you turn counter clockwise will allow the lip of the fixture to drop down (into your hands! be ready to catch it!)