what do you clean toilets with

• Spray the outside of the toilet with a disinfectant bathroom cleaner and let the cleaner sit for a couple minutes, or as recommended by the manufacturer.
• Starting with the tank or top, wipe down the back, front and sides of the toilet all the way to the floor.
• Clean the toilet handle with a disinfecting wipe.

Full Answer

What's the best way to clean a very dirty toilet?

Here are the steps you need to take: Do an initial clean of the toilet bowl - purchase a toilet cleaner that helps to remove limescale and use it to clean the toilet bowl. ... Pour around 250ml of white vinegar into the toilet bowl. Allow the white vinegar to rest for about 2 minutes. Add a few drops of lemon juice to the toilet bowl. Pop in another 150ml of white vinegar. More items...

How to naturally clean a toilet?

Method 2 Method 2 of 2: Cleaning Your Toilet

1. Sprinkle baking soda or borax into your toilet bowl. Lift the toilet seat, so that you can get the baking soda on all of the bowl’s surfaces.
2. Drizzle vinegar into the bowl. A cup of white vinegar should be about the right amount to clean the bowl.
3. Scrub your toilet bowl. ...
4. Flush your toilet. ...
5. Clean the exterior surfaces of your toilet. ...

More items...

What cleaning products should be use for toilet cleaning?

Try one of the following when cleaning that space:

• CLR Bath & Kitchen Foaming Action Cleaner
• CLR Calcium, Lime, and Rust Remover
• Green Works 99% Naturally-Derived Toilet Bowl Cleaner
• Method Bathroom and Toilet Bowl Cleaners
• Proline EFP Toilet Bowl

What is the best cleaner for toilet?

• Scrubbing Bubbles Fresh Brush flushable refills provide a convenient and thorough clean for your toilet
• Flushable pads power through the toughest stains
• Works with the only toilet cleaning system with flushable pads for a convenient clean
• Flushable refills pack includes 20 flushable pads

More items...

What is the best thing to clean toilets with?

The experts we talked to recommended any cleaner with some form of bleach, but you can find plenty of bleach alternatives, as well. I personally use Lysol Hydrogen Peroxide Toilet Bowl Cleaner. A bucket: To ensure that the entire bowl gets clean, you need to reduce the water level before applying the cleaner.

What chemicals can I use to clean a toilet?

Use A Cleaning Solution That Kills Bacteria Bleach is a very popular office toilet cleaning chemical for the toilet and for good reasons. It is cheap, easy to use, and will kill 99% of germs when used correctly. If you don't want to add chlorine bleach to your cleaning supply list, consider an alternative like vinegar.

What household items can you use to clean a toilet?

Method:Pour 2 cups of white distilled vinegar into the toilet bowl, followed by approximately 1 cup of baking soda. This will create a fizz. (Never combine these two ingredients ahead of time, as it will create a huge mess! ... Scrub and let sit for 15 to 20 minutes before flushing. If needed, you can repeat.

What is the most hygenic way to clean a toilet?

Disinfect the toilet bowl and brush Squirt bleach under the rim of the toilet bowl, ensuring you apply it the whole way around the bowl. It will collect in the water at the bottom of the toilet bowl. Put the brush in the toilet bowl and leave it there for a few minutes.

How do I get my toilet white again?

How do I get my toilet bowl white again?Baking soda. Sprinkle baking soda into the toilet.Vinegar. Apply white vinegar over the baking soda.Brush. Use a toilet brush to scrub the toilet.Flush. Flush the toilet a couple of times to rinse.Borax & lemon juice. ... Let it sit. ... Pumice stone.

Can I leave vinegar in toilet overnight?

Let the vinegar sit overnight. This is especially important if you're dealing with hard water stains, since those can take a while to dissolve. In a toilet, hard water stains are usually brown or rust-colored, and they usually don't come off with gentle scrubbing.

Can you leave baking soda and vinegar in toilet overnight?

For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.

Can you use Dawn and vinegar to clean toilet?

Homemade Toilet Bowl Cleaner With Dawn & Vinegar In an old dish soap bottle, combine 1 cup vinegar with 1 cup Dawn. Squirt the mixture onto the toilet. Allow it to sit for 15-30 minutes. Scrub and flush.

Can I mix vinegar and baking soda in toilet?

Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.

What is more hygienic than a toilet brush?

This is where the shiffter comes in. Essentially it's a jet wash for the toilet, which means it is cleaner to use than a regular or even a hygienic toilet brush, because it doesn't come into contact with the bowl. The shiffter is the hygienic toilet brush alternative!

Does bleach damage toilet bowls?

Under no circumstances should bleach be used in the tank of your toilet, as it could corrode the inside of the toilet. The corrosive properties of the bleach can wear away at the internal parts of your toilet, such as rubber seals, and cause leaks or other potentially permanent damage.

Can I pour bleach down the toilet?

"The biggest don't when it comes to toilet tanks is bleach — do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet," says Patty Stoffelen, a bath fixtures merchant for The Home Depot to Martha Stewart.

How do you clean a badly stained toilet?

2. Baking soda and vinegarPour 2 cups of vinegar directly onto stains. ... Sprinkle 1 cup of baking soda onto the stain, and then pour another cup of vinegar over the baking soda.Watch the acid vs. ... Scrub the mixture into stains with a toilet brush. ... Flush the toilet to rinse away the solution.

How do you get rid of brown stains in toilet?

Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).

How do you get stubborn stains out of a toilet?

3.Vinegar and BoraxGrab the Borax and pour ¼ cup into your toilet bowl. Then, using a toilet brush, swish it around.Add 1 cup of vinegar. Allow the solution to sit in your toilet bowl for about 20 minutes.Use a toilet brush to scrub the bowl clean and eliminate any remaining stains.

How do I get rid of bacteria in my toilet?

“For disinfecting surfaces, bleach-based cleaners are the best broad-range disinfectants,” Dr. Ha says. “They contain very harsh chemicals, but they are very effective at killing a wide range of microorganisms. Bleach-based cleaners can even remove the color caused by mold stains.

What to use to clean rusty toilet bowl?

For those difficult toilet bowl stains, grab a stiff-bristled toilet brush to scrub the bowl's interior and under the rim. If you notice a rust-colored ring inside the bowl, the culprit is likely minerals in your water system. Cleaning experts agree the surefire way to attack such stains is with a pumice stone.

How to clean a toilet with a wet brush?

As a last step, clean your supplies. Prop the wet toilet brush under the seat cover and pour bleach or cleaning solution over its business end, into the toilet bowl. Let sit for a minute, then rinse with a pitcher of water. Clean the brush's canister by filling it with warm, soapy water; you can dump it right in the toilet, too. Resist the urge to stick the damp brush back in the canister and be done with it, suggests Maker. Instead, you want to let the brush air out completely before putting it away, to ensure you're not encouraging bacteria growth.

How to clean a toilet bowl with pumice?

Don't worry, as the pumice is a softer stone, it won't scratch the porcelain surface. Turn the toilet's water back on, then flush to rinse the bowl.

How long does it take for toilet cleaner to work?

Whichever toilet bowl cleaner you prefer, use generously and remember to apply some under the bowl's rim. Then, while you're waiting five to ten minutes for those suds to fully work, turn your attention back to the toilet's exterior.

How to clean gloves before going to the toilet?

But before you do, head for the sink and give your gloved hands a good scrubbing with soap and hot water. "It's the best way to make sure you don't get your hands dirty and get every inch of the gloves clean," says Maker.

Can you use milder cleaner to clean toilets?

She recommends draining the water out of the toilet before applying the cleaning solution. "If you get the water out of toilet, you can use a milder cleaner with the same squeaky-clean results," she adds. Plus, you get a better clean with less work.

Can you spray the walls behind a toilet?

Also spray the walls behind and beside the toilet. A University of Arizona microbiologist found that with each flush, bathroom particles can launch into the air before settling onto nearby surfaces. That makes the floor and walls around the toilet prime spots for microscopic splatter.

How to clean a toilet?

Gather Supplies and Prepare the Area. Start by removing everything from around your toilet—cleaning a toilet can be a messy job, and there's always the chance of splashing cleaner or water outside of the actual toilet. Prevent extra cleanup by removing all excess items from around the toilet and on the tank lid.

What to wear when cleaning a toilet?

Wear eye protection when cleaning a toilet. Most cleaning products have bleach and other chemicals that can irritate or damage your eyes, and eye protection will prevent you from splattering toilet water and cleaner. You may also want to use protective rubber or latex gloves to prevent contact with your hands.

How to clean a toilet with a gel cleanser?

Flush and Add Cleaning Solution. Put on rubber gloves before beginning any work. Flush the toilet with the lid down to prevent splashing or spraying. Add your choice of powdered, liquid, or gel cleanser into the toilet bowl, applying as close to the toilet rim as possible to prevent the cleanser from being diluted.

How to clean rusty porcelain bowl?

Next, scrub the bowl with the toilet brush, including the drain hole opening at the bottom of the toilet bowl. Flush the toilet with the lid down. If the toilet bowl has brown or reddish rust or mineral stains, you can clean the porcelain with baking soda or a commercial product, such as Lime-Away or Rust-Away.

Is it a good idea to clean a toilet?

While it's not complicated, it is possible to get it wrong. Believe it or not, there actually is a right way to clean a toilet, and the proper method will help ensure that you eliminate any bacteria and viruses that may be thriving there. The right cleaning techniques will not only give you superior results but also save you time and energy.

Can you wash paper towels in hot water?

Paper towels are a great option because they can be thrown away. If you use reusable cloths, wash them immediately in their own load in hot water with bleach. Avoid toilet bowl cleaner tablets or disks, like the kind that's dropped into the tank or hangs inside the rim of the bowl.

Can you use a sponge to scrub a toilet?

If possible, do not use sponges when you scrub a toilet. Damp sponges provide a perfect environment for breeding bacteria. If you must, experts advise sterilizing sponges by placing them into a microwave oven for 30 seconds or so while damp, as heat generally kills all pathogens.

What to use to clean toilets?

To do a proper job, you should make sure you have at least the following items: 1 Waterproof rubber gloves. 2 Scrubbing sponge. 3 Toilet cleaning spray or disinfectant spray. 4 Toilet brush. 5 Cloth or towel.

How to clean a toilet bowl with a brush?

Use the brush to really scrub the bowl, paying special attention to those areas that can easily be missed. If you find any particularly stubborn stains, then feel free to use further toilet cleaning spray in collaboration with the brush.

How often should I clean my toilet?

Whether you use traditional cleaning chemicals, or opt to use more natural alternatives like baking soda or vinegar, one thing you should take away from this article is the necessity of cleaning your toilet regularly!

How long does baking soda sit on toilet bowl?

Simply apply it all around the sides at the top of the bowl and leave it to sit for five minutes. During this time it will ‘eat away’ any dirt and grime. After this, use a toilet brush to scrub the rest of the bowl, working the baking soda into the surface of the toilet. Then flush the toilet and you’re done!

How to clean a toilet bowl with mineral deposits?

Scrub the bowl with a toilet brush. Once you’ve the active agents within the toilet cleaner enough time to get to work and break down any grime and break down mineral deposits, it’s time to reach for the toilet brush. Use the brush to really scrub the bowl, paying special attention to those areas that can easily be missed.

What to do if your flush doesn't catch everything?

If the flush doesn’t quite catch everything, then use the brush or a wipe to get rid of remaining dirt.

Do you need to flush a toilet brush?

Once you’re satisfied that you’ve done enough scrubbing with the toilet brush, it’s time to give it a flush. The flush will help to wash away any grime or stains that you’ve loosened with your brush.

How to get rid of lime stains in toilet bowl?

Well, it turns out that it can actually be really helpful. You can use WD-40 to break down tough lime stains or hard water lines in your toilet bowl. First, spray a small amount of WD-40 into the bowl, let it sit for a few minutes, then scrub the stains or water lines with your toilet brush. After flushing your toilet, the stains should disappear.

What to do if you have hard water stains on your bowl?

If there are hard water stains around the side of your bowl, you can do a quick sweep around the inside to make sure it hits those stains .

How to get hard water stains off of a drywall wall?

To use WD-40 to remove hard water stains first spray a small amount on the stain. Let it sit for 10-15 minutes. Then, start scrubbing it off. If it doesn’t come off right away, try to rinse the surface with some water and scrub it again. Once it’s clean, rinse it thoroughly to remove any residue.

Why do toilets have seals?

It also creates a seal around the surface of the object, in this case, a toilet, to prevent rust from sticking to the pores of the material in the future.

Do toilet bowl cleaners have chemicals?

Now you may be thinking “but toilet bowl cleaners have chemicals too” and you would be correct. However, many toilet bowl cleaners are now becoming ecofriendly and are being made with natural products, that’s something that can never be done with WD-40.

Can you paint over a toilet if it doesn't come off?

If none of them work, you can use WD-40 to get the stain off. If the stain still doesn’t come off, you can paint over your stained toilet to give it a new and clean appearance.

Can you let a stain sit overnight?

If you want to go all-out to gets rid of those pesky stains, you could even let it sit overnight.

What is the best way to clean a toilet tank?

When cleaning, be mindful of the parts inside, including the chains. You don’t want to break or dislodge anything. Vinegar is perhaps the best way to clean a toilet tank, as it’s naturally acidic. It removes lime and calcium deposits, and it’s a natural antibacterial.

How to clean a toilet with essential oil?

Pour baking soda inside a glass bowl. Add essential oil and mix with a wooden spoon. Break up all oil clumps and store cleaning product inside a glass jar until ready to use. Add one tablespoon of the cleaning mixture to the toilet bowl and scrub with a toilet brush.

How to unclog a toilet with vinegar?

To unclog your toilet, pour a gallon of boiling water into the bowl. Add the baking soda and allow it to sit for several minutes. Mix two cups of vinegar with one cup of hot water and pour down the drain after the baking soda. Close the lid to the toilet , as this will cause a chemical reaction and a potential overflow.

How to get rid of hard water stains in toilet?

To get rid of hard water stains in a toilet, pour one cup of vinegar inside the bowl. Give it a quick stir with your toilet cleaning brush and let it sit for one minute. Dump in the baking soda followed by another cup of vinegar. Leave for 10 minutes.

How to make a toilet smell?

For this recipe, use a single oil or combine to make a pleasant scent. Mix oils, Castile soap, and water in a squirt bottle. Pour in the baking soda and shake. Spray liberally inside your toilet bowl, making sure to get the rim of the toilet, and allow to sit for 15 minutes.

How to unclog a toilet when toddler dropped keys?

One of the first methods to try when unclogging a toilet is boiling water. Bring water to a boil on the stove.

What is a plunger in a toilet?

The simple yet effective tool known as a plunger was designed to loosen clogs in the toilet or sink. The way to use a toilet plunger is simple. If there is no water in the drain, you will need to add some, so you are not just pushing air.

Step 1

Mix together ¼ cup of dish soap with ¼ cup of water and ¼ cup of baking soda.

Step 5

Scrub the toilet in the morning to remove any residual dirt or grime that may still be on the toilet bowl. Flush.

How to clean toilet with coke?

1. Measure out a cup or two of Coke. Open a bottle or can of Coke. You won't need much to clean your toilet — a standard-sized soda can contains 12 fluid ounces (350 ml) (1.5 cups), which should be plenty. If you have a bigger container of Coke, measure about this much and pour it into a glass.

What to do if you live with someone who doesn't flush the toilet?

If you live with others, tell them what you are doing ahead of time. Otherwise, they may think you failed to flush and will flush the toilet for you, thwarting your altruistic cleaning efforts.

How to get rid of a swollen toilet bowl?

Try mixing 1/2 cup vinegar and 1/4 cup baking soda (or 2 teaspoons borax) into 1/2 gallon (2 liters) jug of water. Apply the mixture to the toilet bowl, scrubbing and waiting an hour before flushing. Follow with Coke treatment as needed.

How to get stains out of a bowl?

For stains high in the bowl that is hard to reach, try soaking an old rag in Coke and applying it by hand. You can also use a spray bottle filled with Coke if you prefer not to get your hands dirty.

How to get grime off of a car?

I've heard to use lemon juice and baking soda. Let it sit for about a half hour and the grime comes off like butter.

Why do toilets scratch?

Reglaze the toilet. Scratches are caused by removing surface material. It will be cheaper to buy a new toilet.

Does Coke remove mineral stains?

At this point, you can see how well the Coke was able to remove the stains. While Coke usually works well for the sort s of rings and built-up mineral stains that are common problems in toilets, it may not completely eliminate every stain. If desired, simply re-apply a second layer of Coke and repeat the process.

What to use to clean toilet bowl stains?

Still got some stubborn stains in your toilet? Try the vinegar one more time. If it still doesn’t work, then consider a hydrogen peroxide-based bleach or a non-toxic toilet bowl cleaner product ( this is the one that I use when I don’t use vinegar ).

How to clean brown toilet?

Don’t use apple cider vinegar. The brown color could stain your toilet. Sure, it will clean just as well. But you don’t want to have to worry about staining. Next, fill a clean spray bottle with white vinegar.

How long does vinegar sit in the toilet?

I usually let it work for at least 10 minutes. You can also let it sit for several hours or even overnight. You can even just pour the vinegar into the toilet bowl’s water and let it sit. This is especially effective if there is a toilet ring at water height. I’ve done this when we leave the house for a while.

How to clean a toilet bowl with vinegar?

When it comes time to scrub your toilet, use a toilet brush dipped in the clean toilet bowl water. Then start scrubbing. You will be surprised at how well the grimy mess comes off after soaking in vinegar.

What to do if you have a ring around your toilet?

The next time you notice a ring around your toilet, don’t reach for a bottle of smelly chemical cleaner. Instead, look to your pantry. Because you can use vinegar to clean your toilet!

Can you use vinegar to disinfect toilets?

Here’s 400 more ways to use vinegar! While television commercials would have you believe that you need harsh chemicals to disinfect your toilet, a healthier alternative of white vinegar will work just as well. I’ve never been too sure why people are so ridiculously worried about clean toilet bowl water, either.

Can you spray vinegar on toilet bowls?

You’ll also be apply to apply the vinegar to the entire inside of the bowl and spray on targeted areas. Spray some white vinegar inside the toilet bowl and let it sit for a few minutes.