– Solution:
- Clean the carburetor: You can clean your clogged carburetor with a carburettor cleaner, remove the external panel and spray a few bursts of carburetor cleaner into the choke of your leaf blower.
- Replace the carburetor: You can replace the carburetor if cleaning it is not effective. ...
Why is my leaf blower not starting?
Problems with Starting a Stihl Leaf Blower
- Isn't Started Properly. Stihl leaf blowers have a specific starting procedure, and missing a step in that procedure may cause a leaf blower to have trouble starting.
- Won't Stay Running. ...
- Won't Start at All. ...
- Has a Fuel Problem. ...
- Needs a Professional. ...
Why is my Husqvarna leaf blower not starting?
- Begin the Troubleshooting Process Step 1: Check the Spark Plug Step 2: Check the Components of the Carburetor Step 3: Check for Bad Fuel Step 4: Check the Recoil Starter ...
- What Makes Husqvarna Special?
- The Proper Storage of a Husqvarna Blower
- A Few More Interesting Statistics About the Husqvarna Blower
When does your leaf blower won't start or quits working?
How to Fix a Leaf Blower That Won't Start Check the Spark Plug. Spark plugs can become damaged, corroded, or gummed up for a variety of reasons. ... Clean the Carburetor. The carburetor plays a crucial role in an internal combustion engine. ... Dirty Air Filter. ... Clogged Fuel Filter. ... Clogged Spark Arrestor. ... Faulty Ignition Coil. ... Worn Out Rewind Spring. ... Final Thoughts. ... Additional Leaf Blower Resources. ...
What to do when your blower won't turn?
My blower won't turn what should I do?
- De-energize the system and lock out the power supply.
- You must have access to the inlet or discharge of the unit so remove any filters, silencers or fittings that may interfere with your ability to take a look inside ...
- Remove any belt or coupling guard that may prohibit you from turning the shaft of the unit.
What would cause a leaf blower not to start?
Leftover fuel in your leaf blower is one of the primary reasons a leaf blower won't start. Gas left in the tank for 30 days or more can deteriorate, causing the engine to stall or not start properly. If left for 6 months or more, the gasoline can turn into a thick sludge.
Why has my leaf blower stopped working?
There are many different reasons why a leaf blower may fail to start, including stale fuel, engine flooding, dirty air filters, faulty spark plugs, defective batteries, blown fuses, and contact issues of the power switch.
How do I get my leaf blower to run?
0:232:37Top 6 Reasons Your Leaf Blower Won't Start | PartSelect.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the engine is sputtering during start or stopping as soon as it gets started you may have anMoreIf the engine is sputtering during start or stopping as soon as it gets started you may have an issue with the carburetor. Clean it out using carburetor cleaner and try starting the engine.
How do I know if I flooded my leaf blower?
1:215:10Quickly Unflood Any Leaf Blower - Stihl, Husqvarna, Ryobi Etc.YouTubeStart of suggested clipEnd of suggested clipNow some telltale signs that will indicate that your machine is flooded is if you see some fuelMoreNow some telltale signs that will indicate that your machine is flooded is if you see some fuel coming out of the muffler.
Why is it so hard to start a blower?
If your blower is having a difficult time starting, then you may be dealing with a carburetor issue. The carburetor's job is to ensure the proper mix of fuel and air is directed to the blower's engine. As mentioned, the carburetor can become clogged, making it difficult for fuel and air to enter the engine.
How do you reset a leaf blower?
Open the main menu (the top left corner icon, or press escape), select 'misc' from the tabs at the bottom of the menu, and choose the Hard Reset option.
How long do spark plugs last in leaf blowers?
25 hoursReplace the spark plug with a new one at the start of fall or after every 25 hours of use, whichever comes first.
How many times do you prime a leaf blower?
As always, check with your manual on the proper start procedure for your blower. The next step is to prime the engine to a start. You can press the primer bulb five to six times to make sure that the engine is thoroughly primed. Then take the starter cord into your hand.
How long can gas sit in leaf blower?
How long can gas be stored before it goes bad? Whether in a gas can or in your snow blower, gas can go stale and lose its volatility in as little as 30 days. Using Sta-Bil Storage Fuel Stabilizer can increase storage time up to 24 months.
How do you Unflood a blower?
If your leaf blower has been stored for the season or just has been out of service, it could be in danger of flooding when you try to restart it....Carburetor Models:Remove the air filter cover.Open the carburetor.Pull out the air filter.Start the engine.Cut off the blower.Replace the air filter.
How long to wait if engine is flooded?
Perhaps the best remedy for a flooded engine is time. Simply open the hood of your car and let excessive fuel evaporate for as long as you can. After about 20 minutes try starting your car again without hitting the gas pedal. If this still does not work, you may have to check your spark plugs.
Can you over prime a leaf blower?
Over-priming floods the engine for a similar reason. It overfills the carburetor, which then sprays too much gas into the combustion chamber on your first attempt to start the engine. The remedy is the same: Wait for the gas to drain before trying again.
Can a leaf blower overheat?
The gas engine on your leaf blower needs to operate at a specific temperature: hot enough to burn the fuel and give the engine power but cool enough not to overheat the piston. An overheating problem in the leaf blower is generally caused by a failure to vent gases or the fuel burning too hot inside the cylinder.
How do you clean a fuel filter on a leaf blower?
Pull the fuel filter from the housing and remove the pre-filter from the rest of the unit. Wash the pre-filter using soapy water and place it for about an hour on a rag or paper towel to dry. Remove the felt filter element and either blow it out using a can of air or clean it using a paintbrush.
Why does my leaf blower shut off when it gets hot?
Air Supply Blocked To keep the engine running, cooler air needs to be brought in, and the heated gases need to escape. If the air filter or muffler are blocked, the engine will overheat and shut off again.
Can you clean a leaf blower air filter?
Air Filter To thoroughly clean the filter, wash the reusable parts: Remove any sponges or felt pieces that are part of it. Soak them briefly in warm, soapy water. Rinse them with clean water.
How to fix a leaf blower that won't start?
How To Fix A Leaf Blower That Won’t Start. Leaves in your yard sometimes look bad. However, there are ways to clean your yard. You can either use a hand rake , or a leaf blower to get rid of the fallen leaves. So, if you have a leaf blower, once in a while, you might find that it is not working properly. The most common problem associated ...
Why won't my leaf blower start?
Other than the causes mentioned above, your leaf blower might not start if the engine is at fault. However, that is not something you can troubleshoot yourself, even if you have a knack for using screwdrivers. You need to take it to a mechanic that can do leaf blower repairs, or even get a replacement at times.
Why do you need to take out the spark arrestor on a leaf blower?
Due to repeated use, the spark arrestor can become congested with soot, and clog. If it is clogged the engine might malfunction or not even start . So, you need to take out the spark arrestor and clean it if you see that your leaf blower is not starting.
What happens if a leaf blower spark plug is damaged?
Spark Plug. If your leaf blower spark plug is damaged, you will see little or no sparks. So, you need to check what is wrong with your spark plug. Your spark plug can be damaged in several ways. For example, if the porcelain insulator is cracked, chances are there that one of the electrode has been burnt or has eroded.
What happens if you break the rewind spring on a starter?
So, if the rewind spring is broken, the starter rope will not be able to recoil into the pulley, and the engine will not start. So, you will need to replace the rewind spring.
Why won't my car start if the fuel filter is clogged?
So, what causes a clogged fuel filter? When you leave the fuel in the leaf blower for long period of time, without using it, some ingredients of the fuel may evaporate, leaving behind a sticky liquid. This can clog the filter. So, if you have left the leaf blower for long period of time, make sure that you drain the fuel first, clean the fuel filter, and then try starting it.
How to tell if leaf blower is bad?
When it comes to leaf blowers, you might also find that there are other symptoms of malfunction. For example, your leaf blower can have excessive vibration or even leave behind excessive smokes. Or it might even run rough. Depending on the different symptoms you will need to troubleshoot, so that you don’t have a dispensable leaf blower in your hands.
Before You Use Your Leaf Blower
As soon as summer ends and you realize you need your leaf blower for the fall, be prepared to check the fluids you need for this tool. For most leaf blowers, that’s gas and oil.
After You Use Your Leaf Blower
Each time you use your leaf blower, you should carefully set it down for a few minutes to let the engine cool off. Then use a damp cloth to wipe down the exterior so you can keep it looking nice all fall. Once it looks clean on the outside, examine the hoses to make sure they’re not loose or cracked.
Leaf Blower Maintenance for Every Year
At least once per season, you should perform a few basics to keep your leaf blower staring and in good shape. After all, it’s the one thing standing between you and a yard taken over by leaves, so you want to treat it well!
Why won't my leaf blower start?
Leftover fuel in your leaf blower is one of the primary reasons a leaf blower won’t start. Gas left in the tank for 30 days or more can deteriorate, causing the engine to stall or not start properly. If left for 6 months or more, the gasoline can turn into a thick sludge. To remedy this situation, just empty the old fuel and replace it with new fuel. It’s best to remove any old fuel before stowing your blower away for a period of time to prevent this from happening in the future.
What to do if fuel turns into sludge?
Old fuel that has turned into sludge may be blocking the carburetor or fuel filter. First, check the carburetor to see what has happened. If it’s clogged, there are three options: clean the carburetor, rebuild it, or replace it entirely. If a clogged fuel filter is the source of the issue, you’ll likely need to replace it.
Can a leaf blower spark plug be replaced?
Damage to the spark plug may warrant replacement. Several factors could affect the performance of your electric leaf blower ’s spark plug, including a crack in the porcelain insulator, heavy carbon buildup at the electrode, or an electrode that has been burned away or damaged. Thankfully, all that’s needed to check the status of the plug is a spark plug tester. With the engine on, you should be able to see a strong spark in the tester’s terminals. If the spark is absent, that’s an indicator that the spark plug needs to be replaced.
Why is my leaf blower not working?
Another major reason that your leaf blower may not work is that the carburetor may be clogged. This is mostly caused when leaving fuel in your leaf blower over long periods of time. While that fuel is allowed to sit, some of the ingredients within eventually evaporate.
Why won't my Craftsman leaf blower start?
The most common cause for failure to start in a Craftsman leaf blower is the spark plug. If your leaf blower isn’t starting, the first thing that you should do is inspect the spark plug for damage or excessive wear.
How Do You Start a Flooded Leaf Blower Motor?
Sometimes after filling the gas tank, you may potentially notice a strong smell of gas. This is a prime indication that the engine may have flooded. When the engine is flooded, it certainly won’t start as it normally does.
Why is my fuel filter clogged?
The cause and impact are the same, too. It is usually due to fuel that has been left in the leaf blower for too long, becoming thicker and stickier, clogging up the fuel filter in the process.
What happens when a leaf blower starter pully is broken?
This piece is in conjunction with the recoil starter. The starter pulley will wind up the starter rope whenever it isn’t in use. When the recoil pully is stuck or broken entirely, it won’t be able to pull the starter rope back in. When the starter rope can’t rewind, the engine of the leaf blower won’t start.
How to tell if spark plug is defective?
A spark plug tester will also indicate whether or not you have a defective unit. When testing, you should notice a strong spark between the terminals on the tester when the engine is really clicking.
What happens if you clean a carburetor?
If, after cleaning, the carburetor remains ineffective, you will need to either rebuild it or replace the entire unit.
Why won’t the leaf blower engine start?
If your leaf blower’s gas-powered engine won’t start, here are the nine most likely reasons why:
What happens if a leaf blower switch is broken?
If the switch is faulty, it may prevent the engine from starting. Broken throttle cable – If your leaf blower uses a throttle trigger to accelerate the engine , but the trigger appears to have no effect, it’s likely the throttle cable has broken. The throttle cable, as well as other trigger handle components, can be replaced individually ...
What happens if you damage a blower blade?
Damaged blower fan blade – If you notice the strength of the air flow coming out of the blower tube is reduced, the blower housing may be clogged with debris or the blower fan blade may be damaged. New fan blades are available for purchase for practically all leaf blower models and are relatively inexpensive.
Why is my spark plug not working?
Defective spark plug – Due to carbon build-up or a weakened electrode, a spark plug will degrade over time and be unable to ignite the compressed fuel and air inside the engine’s combustion chamber to start or run the engine.
What causes a restriction in a carburetor?
Restricted carburetor – Old or bad fuel can leave a gummy residue inside the carburetor creating a restriction. This will prevent the proper ratio of fuel and air from entering the cylinder which can cause the engine to have trouble starting. You should always make sure you keep fresh fuel in the tank and use a fuel stabilizer to help preserve its quality. You can try cleaning the carburetor ports with a dedicated carburetor cleaner, or WD-40, to clear out the restriction, but if the clog is particularly bad, you may need to purchase a new carburetor.
What can interfere with a leaf blower?
In addition to the engine parts that can fail, there are other parts as well that can interfere with proper leaf blower operation: Faulty on/off switch – Many leaf blower models will have an on/off switch that will need to be set to the “on” position before the engine can be started.
Can a carburetor clog the fuel filter?
Clogged fuel filter – That gummy residue that can clog a carburetor can do the same to the fuel filter. Simply replace the filter with a new one to solve the problem. Again, this is something that is recommended anyway as part of the engine’s annual maintenance.
