What You’ll Need:
- Pumpkin
- Pumpkin carving tools
- Flat-edged ice cream scoop or scraper scoop
- Paring knife
- Masking tape
- Ballpoint pen
- Pushpins, corsage pins or straight pins
- Petroleum jelly
- Candle
- Tracing paper or tissue paper
- Pencil
- Scissors
What are some good Pumpkin Carving ideas?
Pumpkin Carving Ideas – Awesome Jack O Lanterns!
- Jack O Lantern – A Little Background. Jack O Lanterns are well known as emblems of Halloween. ...
- Cool Pumpkin Carving Ideas. Once you have completed your Jack O Lantern, try adding some dry ice to give it this cool pumpkin effect.
- Scary Jack O Lanterns. ...
- Funny Pumpkin Carving Ideas. ...
- Easy Pumpkin Carving Ideas. ...
How do I clean and carve a pumpkin?
- Print out these free pumpkin carving templates and tape them to the front of the pumpkin. ...
- Break out the power tool Just be sure there’s an adult to supervise. ...
- Instead of carving holes in the pumpkin for a face, use the pumpkin flesh as a “sketchpad.” Vary the depths of each carving stroke to change how much light passes ...
How do you make a carved pumpkin?
How to get a Carved Pumpkin in Survival Mode
- Find a Pumpkin Plant. First, you need to find a pumpkin plant growing in your Minecraft world. ...
- Hold your Shears. Next, place the shears in your hand by selecting them in the hotbar. ...
- Use the Shears. Next, use the shears on the pumpkin to carve the face into the pumpkin. ...
- Dig up the Carved Pumpkin. Now you can dig up the carved pumpkin. ...
How to carve a simple yet scary pumpkin face?
Use pumpkin knife to cut the pumpkin face then cut off the edges and any imperfections it will allow light to come out more and shine throughout pumpkin. Halloween pumpkin faces to carve. If you are searching for designs to make your own these pumpkin stencils range from beginner to advanced.
What tools do you use to carve a pumpkin?
10 Best Pumpkin Carving ToolsDremel Pumpkin Carving Kit. PHOTO: AMAZON. ... Dremel Flex Shaft Attachment. PHOTO: AMAZON. ... Pumpkin Gutter Drill Attachment. PHOTO: AMAZON. ... Pumpkin Masters Power Saw. PHOTO: AMAZON. ... Speedball Linoleum Cutter. PHOTO: AMAZON. ... Saral Transfer Paper. ... Zombie Pumpkins Pro Pumpkin Carving Tool Set. ... Knife Sharpener.More items...
What materials do you need to carve a pumpkin?
What You Need1 medium-sized pumpkin (or as many as you want to carve)Brown paper grocery bags, newsprint, or butcher paper.Sharpie or other permanent marker.Pumpkin carving kit (including a scraper, carving knife, and a wire modeling tool) or a serrated knife, ladle, and an X-ACTO knife.More items...•
What is the best thing to carve a pumpkin?
A Serrated Vegetable Knife “You want to saw through the pumpkin with it,” says McMahon, explaining that the motion should be a slow back and forth — not a pushing one. This way, the knife has a better grip on the pumpkin and makes easier cuts, which means you're less likely to have an accident.
What can I use if I don't have pumpkin carving tools?
A good paring knife will work well if you want something you can use outside of the month of October. This one from Kuhn Rikon is inexpensive, but sharp and reliable. For scooping out pumpkin guts, an ice cream scoop works wonders. Especially these newer models that are shaped like a spade and have a sharp edge.
What is the easiest way to carve a pumpkin?
0:022:11How to Carve a Pumpkin like a Pro - Easy Halloween DIY by Warren NashYouTubeStart of suggested clipEnd of suggested clipThen using either a pencil or a pen mark where you're going to slice the top of the pumpkin off thenMoreThen using either a pencil or a pen mark where you're going to slice the top of the pumpkin off then using a sharp knife. And while securely holding the pumpkin carefully slice the top off.
How do you prepare pumpkin for carving?
2:063:42How to Select and Prep a Pumpkin - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside out use a damp sponge to clean off the lid outline. Next scoop out the strings. And seedsMoreInside out use a damp sponge to clean off the lid outline. Next scoop out the strings. And seeds from inside the pumpkin use a spiral motion to get it all out make sure to save the seeds.
How do you carve a pumpkin without a carving kit?
0:504:38DIY Pumpkin Carving Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you get along enough piece you don't want to be too skimpy here. And then just wrap itMoreMake sure you get along enough piece you don't want to be too skimpy here. And then just wrap it tightly around the edges securing the bobby pin to the pencil.
How do you surface carve a pumpkin?
3:1811:03How To Pumpkin Carve (Surface Carving) | Tips & Tricks | Time-LapseYouTubeStart of suggested clipEnd of suggested clipTaking out more the inside because you don't need the light to shine through if you're doing aMoreTaking out more the inside because you don't need the light to shine through if you're doing a surface that you kind of want your light to shine through like in this pattern.
Can you use cookie cutters on pumpkins?
Cut a wide hole in the bottom of a pumpkin and scoop out the seeds and flesh. Using a pen, trace the inside of different-size star cookie cutters onto the pumpkin in a random pattern. Place each cookie cutter on the corresponding shape and tap lightly with a rubber mallet until it cuts through the pumpkin.
How do you carve a pumpkin without a kit?
0:217:12How to carve a scary pumpkin for halloween with knife only - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you do for us to open it and carve out everything that's inside all the slimy stuff in there.MoreWhat you do for us to open it and carve out everything that's inside all the slimy stuff in there. And you can do that with your preferred method of course I use two different spoons.
How do you carve a pumpkin step by step?
1:074:04How to Carve Halloween Pumpkins - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen cut out the mouth then using the same technique peel off the skin in front of the teeth. NextMoreThen cut out the mouth then using the same technique peel off the skin in front of the teeth. Next we're going to carve out each tooth until you have something which looks like. This.
How do you surface carve a pumpkin?
3:1811:03How To Pumpkin Carve (Surface Carving) | Tips & Tricks | Time-LapseYouTubeStart of suggested clipEnd of suggested clipTaking out more the inside because you don't need the light to shine through if you're doing aMoreTaking out more the inside because you don't need the light to shine through if you're doing a surface that you kind of want your light to shine through like in this pattern.
How do you carve a pumpkin outside?
1:567:43How to Carve Incredible Pumpkin Faces Ray Villafane Martha StewartYouTubeStart of suggested clipEnd of suggested clipYeah just kind of you know I usually pick a point that has a part of the pumpkin has a point. I needMoreYeah just kind of you know I usually pick a point that has a part of the pumpkin has a point. I need to scrape it off rust right. Right. Yeah it's just kind of half.
How to carve a pumpkin
Whether you want to sculpt your pumpkin to look like Jack Skellington or a spider crawling in its web, the pumpkin-carving process remains virtually the same. Below, we broke everything down step by step, all according to guidance the carving experts gave us.
1. Pick the right pumpkin
When it comes to picking the best pumpkin, pay attention to the stem, said Jon Neill, a special effects artist and professional pumpkin carver. The best pumpkins for carving are healthy and freshly harvested from the vine, he noted, and a sure way to distinguish the older pumpkins from the newer ones is through the stem.
2. Prepare your workstation
Pumpkin carving can get very, very messy. Before you so much as yield a knife, you should prepare your workstation so that it will be easier to clean up when your carving is complete. Neill suggested lining the floor with old newspapers, if you have any. “Whatever you have [that’s] easiest” will work,” he said.
VICMORE Plastic Drop Cloth
During the “slippery” parts of the process — namely, the removal of the pumpkin pulp — Neill said it’s safer to wear a pair of gloves. He likes to wear nitrile gloves or rubber gloves while he carves because he doesn’t want his hand to accidentally slip on the blade.
3. Cut a lid (ideally not from the top)
In order to access the inside of the pumpkin, you will need to cut a lid into it that’s large enough to fit your hand and any tools you might be using. According to Neill, the lid should be at least 5 inches in diameter, but you can go even bigger if you need more space to work.
YEAHOME Upholstery Staple Gun
For the lid-carving process, a kitchen knife should suffice. However, Neill said you shouldn’t use a knife with a blade longer than 5 or 6 inches. “I want to be able to stay in control of it,” he explained.
Pumpkin Masters Cutting Tool
Evan also likes the smooth scoopers that come in most Halloween carving kits. He specifically prefers smooth scoopers over the ones with jagged edges since he purposefully manipulates the thickness of the pumpkin walls, and a serrated edge can get in the way of that.
How to carve a pumpkin in 6 easy steps
To help you get started, we've put together a simple guide on how to carve a pumpkin below, with help from Liam Lapping.
What are the best tools to carve a pumpkin?
Using the right tools to carve your pumpkin not only makes the job easier but is safer, too.
What is the best pumpkin for carving?
So, you're off to pick your pumpkin from the store or fresh from the patch. Or, maybe you've followed our tips on how to grow pumpkins and have some ready to go in your veg plot. Wherever you're sourcing it from, there are certain things to look out for.
What can you do with the leftover pumpkin after you've finished carving?
So, you've learned how to carve a pumpkin. But what can you do with all the leftovers? It seems a shame to waste them, however research conducted by surplus food experts Too Good To Go has found that more than two thirds of Brits don’t know what to do with the leftover pumpkin flesh and seeds.
1. A Serrated Vegetable Knife
The best tool for cutting the eyes, mouth, and nose out of your jack-o’-lantern is something that’s probably already sitting in your kitchen: “I use a fruit and vegetable knife with a serrated edge,” says McMahon, who notes that his is eight inches long.
2. A Hacked Soup Ladle
You know how those plastic pumpkin-carving kits always come with a scooper meant for scraping out the seeds? McMahon has a much better suggestion: “I go to the 99 cent store and get a soup ladle — and then I break off the handle,” he says. It’s deeper than those kit scoopers and it can hold a lot more pumpkin guts at once.
1. An X-ACTO Knife
The best way to take your carving skills up a notch is to invest in an X-ACTO knife (you can buy them at any art-supply store) for detail work. McMahon says he uses these artist’s knives when he wants to cut into — but not all the way through — the pumpkin’s skin.
2. Clay Sculpting Tools
Wire-end modeling tools (similar to the one seen here; these are also available at art-supply stores) are meant for sculptors — and you are kind of sculpting a jack-o’-lantern when you carve it.
What is the best way to carve a pumpkin?
Watch our video guide to learn the best, beginner-friendly pumpkin-carving method.
How do you prepare a pumpkin for carving?
Prepare your pumpkin by washing it and wiping it down to remove any dust that may have accumulated.
How to make a Jack O' Lantern – carving the pumpkin
Now get ready to make some mess! Pumpkin carving is a messy job and it’s a good idea to have something nearby to put the pumpkin guts in. Draw a circular lid around the pumpkin stem. Depending on the size of your pumpkin, your lid should be around 12-15cm in diameter.
How to carve a pumpkin without cutting through
As before, you’ll want to first hollow out your pumpkin first, so that there is space to put a light inside.
What do you need to carve a pumpkin?
All you need is a small, sharp knife with a sharp, serrated edge to cut out the pumpkin’s face, along with a large spoon to scoop out the middle of the pumpkin. You can also get some helpful kits and templates – read on to stock up!
Pumpkin carving ideas
Martha Stewart has created this super easy design for a pumpkin owl that just about anyone can master. Just grab two pumpkins (one large for the body, and one smaller for the head) and use toothpicks to join the two together.
If you want actually useful, multi-purpose kitchen tools
There are a lot of specific pumpkin carving kits you can buy, but if you don't want a set of hyper specific tools that you'll have to store and pull out of the depths of your storage closet next year (if you're me they'll just end up lost), here are multi-purpose kitchen tools you can use year-round.
Fun pumpkin carving kits and tools for kids
If you want to simply buy one kit that includes everything, this is your kit. It includes a small saw tool, a scooper, and a small drilling tool. Its tools are sturdier and higher quality than many of the cheap plastic kits you can buy.
For People Who Don't Mess Around
This is a special attachment for your drill that gets in there, and with the kind of power only available on heavy machinery, absolutely goes to town scraping away the pumpkin guts. Don't toil away clearing out your pumpkins: be efficient with this tool that'll make your jack-o-lanterns the envy of the neighborhood.
For Lighting up Your Pumpkin
It's possible to buy little tea lights in huge quantities on Amazon for not much money, like this set that's available in a pack of 100 or 300. Think of all of the pumpkins you could carve with this many lights. In fact, let's make it a challenge: carve as many pumpkins as there are tea lights in this pack.
For Roasting the Pumpkin Seeds
If you don't roast the pumpkin seed loot from your carving, you're totally missing out on one of the best parts of the whole experience. (Here's how to roast pumpkin seeds .) Though it's very simple and requires few tools, you'll need to make sure you have a colander for rinsing them.
Pumpkin carving tools
The little saw that comes with a standard pumpkin carving kit is so flimsy, it almost always breaks halfway through the project. Opt for a rasping jab saw instead. It's strong enough to cut through drywall, which means it'll slice right through a pumpkin. It has a sharp tip, which should make that first cut into the pumpkin nice and easy.
Pumpkin decorating accessories
California is lifting its mask mandate on Wednesday. Here's what to know.
Common household tools
For basic carving, there are four things you most likely already have at home for a quick carving session.
Professional pumpkin carving tools (for any level!)
Although these everyday kitchen tools are convenient, I find that a more professional pumpkin carving kit designed to do the job is an affordable investment. It just makes the process more straightforward, enjoyable, and, most importantly, safe.
Fine-tooth saws
These are the ones commonly found in those grocery store kits. They come in different sizes: fine (intricate cuts), medium (patterns), and large (lid and large cuts), making it effortless to maneuver different designs. The sharp serrated edges make it easy to cut through thick pumpkin walls.
Pumpkin scooper and scraper
These scoopers usually have sharper spoon edges that may be serrated. This design helps to scrape off the fibers, pulp, string, and seeds from the pumpkin cavity. You want the inner walls to be clean and clear for carving.
Double-ended needle and clean up tools
To make tracing easy for basic and more detailed designs, use a needle tool to pierce small holes into the skin. Use the dots to transfer the design and then connect them with a marker or free hand to avoid dark lines left on the pumpkin. The cleanup tools help to add small details and remove any unwanted pieces of pumpkin.
Etching and relief chisel
The chisel takes design to the next level. It easily scores and removes the layer of pumpkin skin. This creates layers of texture and color contrast. It can also be used to make wider openings and cuts in the flesh.
Hole cutting tool
Make circles with ease for eyes, nose, ears, and other designs with this sharp and long circular hole cutter.
