What is the fullness of a curtain panel?
A typical fullness measurement is “2-1/2 times” (often abbreviated as 2-1/2 x). This means the drapery panel will be made with fabric 2-1/2 times as wide as the finished panel width or window width. Say, for example, you would like to make a drapery that will cover your window entirely, and your window is 54″ wide ( outside measurement ).
What is a curtain panel?
A curtain panel is a single curtain section that can be used alone in some window treatment situations or with other panels to create a fuller look or more functional effect.
How do you calculate curtain panel size?
Divide your total inches measurement by the width of the panels you have chosen. If you want the curtains to be able to close fully, you should always use enough panels to cover the width of the window. Round up to the next whole number if you want to achieve more fullness.
How to choose curtains for a window?
Divide your total inches measurement by the width of the panels you have chosen. If you want the curtains to be able to close fully, you should always use enough panels to cover the width of the window.
How many curtains come in a panel?
A panel is a single curtain, so it is one piece of fabric. So if you want that traditional curtain look, you will need to buy two curtain panels.
Why are curtains sold as one panel?
Curtain panels that are sold in individual packs are more affordable for the bottom line because people can buy the exact number of panels they need to decorate their windows. There are no extra costs to eat because you pay for what you need and that's that.
What does it mean when a curtain says 2 panels?
Example: If your window measures 36" wide (window width x 2 = 72"), you need curtains that will give a minimum width of 72" or 2 panels for that window. In this case 2 panels will give about 100" to 120" of width which will look nice and full. Always round up to the next full number.
Do you need 2 curtain panels?
If you have larger windows, you may want to consider two curtain panels. They do fit better in the window, requiring a little less material than a single panel. It can sometimes be cheaper buying two smaller panels than one larger one. The double panels can also look better for larger windows.
What is the difference between one panel and two panel curtains?
Types. Single Panel Curtain:As the name states, single panel curtains are made of one piece of fabric. These are great for sliding glass doors. Panel Pair: These curtains come in matching pairs, allowing you to hang the two pieces of fabric on either side of the window.
Can I hang just one curtain panel?
Single curtain panels are a refreshing change from the norm. They can instantly perk up the décor, irrespective of the width of the window. Sweep them over to one side for a romantic setting or let them hang for a classic, uncluttered appearance. Not to mention that they are easier to maintain.
What is the second curtain called?
Valance. A valance is a short curtain and comes in many many shapes and styles. Valances can be used on their own to cover the tops of windows, doors or along with sheers and drapes.
How do you measure curtain panels?
Measure the Width If you want your curtains to close and cover the entire window: Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.
What are half curtains called?
The short, sheer curtains that cover only the bottom half of a window over a kitchen sink, frequently matched to a valance across the window's top, are called café curtains.
How many curtain panels do I need for one window?
Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.
Should you put curtains over blinds?
Hanging curtains over blinds adds extra depth and elegance to your windows, as blinds alone can look cold or unfinished. Sometimes hanging curtains on their own is sufficient, but occasionally you need to add extra privacy or light control.
Do curtains need to touch the floor?
So should curtains touch the floor? The short answer is yes... usually. But when making any decision about your window treatments, whether they're drapes, blinds, or shades, it's important to consider every aspect of style and function so you can choose the best option for your windows and your home.
Are dunelm curtains sold in pairs?
The majority of our curtains come in pairs, so you'll find two curtains included in each pack. If you're not sure, you can check this on individual product pages. Voiles and door curtains are sold as single panels.
Can you put two pairs of curtains together?
Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you're working with patterned panels check that the pattern matches before and after pinning.
How are curtains sold?
Ready-made curtains tend to be sold in 137cm (54”), 182cm (72”), and 228cm (90”) drops, while some ranges go up to 274cm. Measure the drop from your curtain pole or track. If you're buying curtains with eyelets or tab tops, measure from the top of the pole to allow for the fabric heading above the pole.
How many panels do I need for 2 windows?
In most cases, you will need four panels for a double window. If you want to go for a flat or wispy look, then you can get by with two panels as long as they are wide enough to cover the entire window.
How wide should curtains be?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
How much more material does it take to make a curtain?
On most curtains & window treatments, it takes two to three times more material/curtain to provide the proper fullness in appearance when installed/hanging on rod than the actual window width.
What is the width of a rod pocket curtain?
The width of rod pocket curtains is stated as the flat out width. You would never use the curtain flat out so keep in mind that a 60" wide panel will not look good if you try to cover a 60" window with it. You need to provide fullness by using multiple panels for a window that size.
How wide is a pair of pleated drapes?
Pinch pleated drapes on the other hand have the fullness sewn in. So a pair of 48" wide drapes can cover 48".
How many panels per side for curtains?
If you are making your own curtains, you can adjust the panel width accordingly to have one panel per side, but if you are purchasing curtains, make your decision based on the width the curtains come in.
How to measure curtain rod width?
Measure the width of the curtain rod if you have chosen it. If you haven't chosen one, measure the width of the window and add 1 to 3 inches for each side of the window. The amount you add depends on how far to the side of the window you want the curtains to hang.
How to make a symmetrical window?
If you want to achieve a symmetrical look, choose to have the same number of panels on each side of the window. Install more or fewer panels to create your look. Once you have chosen the style of curtains that you want, you need to determine how many curtain panels are necessary to create the look you desire. ...
How wide are curtains?
Standard Curtain Width. As a near-universal convention, most standard curtain panels are 48 inches wide, so sizes vary mostly in length. The idea is that if you have very wide windows, you should be able to line several curtains together – so the big challenge is to look for the right length.
How to determine curtain size?
The actual curtain size that you’ll need will be determined by the height of your ceiling and the desired effect. There is a lot of room to play around with here, and there is only one rule of thumb: do not, ever, buy curtains that are just the same length as the window. They simply won’t provide enough coverage.
How far down do curtains leave?
Puddling length curtains usually leave up to two or three inches below the floor. The idea here is to get the curtains to puddle on the floor. This style is usually showcased in very formal rooms, such as old-style dining rooms. The “puddles” tend to look better with heavier winter fabrics, and velvety finishes will add to their dramatic appeal.
How far above the window should a curtain rod be?
Before deciding on a certain size, make sure to locate the exact points where the rods will be installed and supported. Try to make sure the rod is at least 4 inches above the top edge of the window. This will ensure complete coverage and will prevent the rod from being visible through the window – unless you are dealing with tier curtains, a visible rod is a huge no-no!
How far should a floating curtain be from the floor?
Usually, floating curtains should hang either 4 inches under the edge of the window or just two inches away from the floor.
What do curtains do to a room?
Neat, well-lined, and carefully placed curtains will make a room look bigger and fresher. They can add to the symmetry of the room or help you hide an awkwardly-placed window. On the other hand, the effect of using the wrong curtain size is harder to define.
What is floating curtain?
The idea behind floating curtains is to leave some room between the edge of the curtain and the floor. This style is great for scenic rooms with very wide or panoramic views: if matched with sheer or light curtains or with an additional layer of cascading or tied draperies, floating curtains create a very exotic visual effect.
Curtains. One or Two panels?
We have 4 narrow windows in our master. do I need 2 panels of drapery for each window? or should I old have one? the attach pics show one panel on each window!
Comments (2)
Hi Pkmatusiak, Did you decide what to do with the windows? I think my preference would be for a slightly wider rod and two panels to give the illusion of larger windows.
How many widths per panel for a window?
Most windows regardless of the width of the window will require 1 1/2 to two widths per panel for optimal fullness. A single width is typically not recommended unless the window is extremely narrow.
How wide is a flat panel?
A flat panel, rod pocket or any other drapery treatment that doesn't have the gathering or pleats results in a finished panel width of approximating 48 inches wide. So in the case of a flat drapery panel, one width equals 48 inches in a finished drapery panel.
What is the fullness of a drapery panel?
A typical fullness measurement is “2-1/2 times” (often abbreviated as 2-1/2 x). This means the drapery panel will be made with fabric 2-1/2 times as wide as the finished panel width or window width.
How wide should drapery panels be?
If you plan to have a finished panel width (the width your drapery panel will be when installed at the window) of 24″, with a 2-1/2x fullness your fabric would need to be at least 60″ wide.
How much fullness do I need for a curtain?
The fullness measurement you choose depends on the weight of your drapery fabric. A thin, sheer fabric may require a 3x fullness to look rich and full at the window. On the other hand, a heavyweight fabric with lining may only require a 2x fullness for the same effect. For this shirred (gathered) cafe curtain in my bathroom, I used a 2x fullness, since the fabric is on the heavy side.
How wide should a window be for drapery?
Say, for example, you would like to make a drapery that will cover your window entirely, and your window is 54″ wide ( outside measurement ). Take the 54″ measurement and multiply by 2.5. Your result is 135″. The fabric will need to be at least 135″ wide in order to cover your window with a 2-1/2 times fullness.
What is fullness in window treatments?
The “fullness” of a window treatment is a measure of how “full” the treatment is at the window. Quite simply, it’s a way to measure how much fabric you squash on to your drapery rod.
