How did the Buick Electra 225 get its name?
The appearance was shared with two other Buick models, the mid-level Invicta and the entry level LeSabre. The Electra 225 nameplate was a nod to the latter car's overall length of over 225 in (5,715 mm), earning it the street name "deuce and a quarter."
Why is it called a Chevy Electra 225 Riviera?
The Electra 225 nameplate was a nod to the car's overall length of over 225 in (5,715 mm), earning it the street name "deuce and a quarter." The Electra 225 Riviera was the top-line model and it shared its six window hardtop roofline exclusively with Cadillac (which offered it on all of its models).
Why is the Electra 225 called The Deuce and a quarter?
The Electra 225 nameplate was a nod to the latter car's overall length of over 225 in (5,715 mm), earning it the street name "deuce and a quarter." The Electra 225 Riviera was the top-line model and it shared its six window hardtop roofline exclusively with Cadillac (which offered it on all of its models).
What are the differences between the Ford Electra and Electra 225?
Two-tone Electras had the color accent on the rear cove. In addition Electra 225s had back-up lights, Glare-proof rearview mirror, parking lights, signal light, safety buzzer, courtesy lights, two-way power seat, Super Deluxe wheelcovers with gold accents and power windows. The Electra and Electra 225 were the same length in 1961.
What does the 225 stand for?
The number “225” stands for the width of the tire in millimeters – so in this case the tire is 22.5 cm wide. The “45” that follows is the aspect ratio - the height of the tire sidewall as a percentage of its width.
What is Buick 225?
Introduced in 1959 as the Electra 225, named for the car's 225-inch length, the big Buick became known as the “Deuce and a Quarter.” The Deuce was one gi-normous automobile.
How long is a 1969 Buick Electra 225?
224.8 in.Vehicle Length: 224.8 in. Wheel Base: 126.2 in.
What size engine is in a Buick Electra 225?
The Buick Electra 225 4-Door Sedan 1969 430-4 V8 has a V 8, Petrol engine with 7041 cm3 / 429.7 cu-in capacity.
Why is it called Electra 225?
The Electra 225 nameplate was a nod to the car's overall length of over 225 in (5,715 mm), earning it the street name "deuce and a quarter." The Electra 225 Riviera was the top-line model and it shared its six window hardtop roofline exclusively with Cadillac (which offered it on all of its models).
Why do they call it a deuce and a quarter?
The Electra 225, or Deuce and a Quarter as their fans call them, is named for its total length: 225 inches. These big luxury sedans were from the end of a truly great era for Buick.
How much is a 69 Buick Electra 225 worth?
Vehicle Valuation AnalysisBodystylesMedian SaleCustom Convertible$16,000Custom HardTop Coupe$3,630
What was the engine in a 1969 Buick Electra 225?
The Buick Electra 225 Convertible 1969 Custom 430-4 V8 has a V 8, Petrol engine with 7041 cm3 / 429.7 cu-in capacity.
What years did Buick make the Electra 225?
The 1965 Electra 225 continued with the clean, angular lines of the previous generation, though styling was updated with a slight hump over the rear wheels. The 1966s were very similar. See more classic car pictures.
How many Buick Electra were made?
Only 7976 were produced.
What engine is in a 1966 Buick Electra?
This 1966 Buick Electra is powered by a 425ci (7.0L) Nailhead V8 mated to a 3-speed TH-400 automatic transmission. Power steering and power brakes are standard on this Electra.
How long is a 1966 Buick Electra 225?
223.5 in.1966 Buick Electra 225 Info Vehicle Length: 223.5 in. Wheel Base: 126 in.
What years were Buick Electra?
The Buick Electra and the Buick Electra 225 were full-size premium automobiles built by the Buick division of General Motors. The Electra name (in various manners) was used by Buick between 1959 and 1990.
How many Buick Electra were made?
Only 7976 were produced.
What engine is in a 1969 Buick Electra?
With a curb weight of 4542 lbs (2060 kgs), the Electra 225 Convertible 1969 Custom 430-4 V8 has a naturally-aspirated V 8 cylinder engine, Petrol motor, with the engine code GM Buick Big-Block V-8 430. This engine produces a maximum power of 365 PS (360 bhp - 268 kW) at 5000 rpm and a maximum torque of 644 Nm (474 lb.
How much does a 1973 Buick Electra weigh?
How much does a Buick Electra 225 Hardtop Coupe 1973 weighs? The Buick Electra 225 Hardtop Coupe 1973 weighs 2275 Kg / 5016 lbs.
What engine is in Buick Electra 225 Hardtop Sedan 1973 ?
The Buick Electra 225 Hardtop Sedan 1973 has a V 8, Petrol engine with 7468 cm3 / 455.7 cu-in capacity.
How many horsepower (hp) does a 1972 Buick Electra 225 Hardtop Sedan 1973 have?
The 1972 Buick Electra 225 Hardtop Sedan 1973 has 228 PS / 225 bhp / 168 kW.
How much does a Buick Electra 225 Hardtop Sedan 1973 weighs?
The Buick Electra 225 Hardtop Sedan 1973 weighs 2300 Kg / 5071 lbs.
Is Buick Electra 225 Hardtop Sedan 1973 All Wheel Drive (AWD)?
No, the Buick Electra 225 Hardtop Sedan 1973 is not All Wheel Drive (AWD). It's Rear Wheel Drive (RWD).
What does 225 mean on a Buick?
It sure does mean something!<P>When Buick introduced all new series names in 1959 (LeSabre, Invicta, Electra), the top-of-the-line model was an extended-length version of the Electra. The standard Electra measured 220.6 inches in overall length, but the ultimate Buick -- the Electra 225 -- stretched 225.4 inches. This is where the "225" designation originated. Beginning with the 1962 models, the standard Electra had vanished and all Electras became Electra 225's.<P>The extra length of the '59 225 was all in the rear overhang area. In this respect, the car was similar to the '58 Limited, which shared its wheelbase with Super and Roadmaster models, but was longer overall due to the extended rear deck.<P>Interestingly, the longer body was used only on the two different 4-door hardtop styles offered in the Electra 225 series. These cars were unique among the Buicks in that they had a large stainless molding stretching from the rear wheel opening to the rear bumper. The Electra 225 convertible used the standard Electra body rather than the extended length body, and lacked the large stainless molding on the rear quarter.<P>There were no 2-door hardtops offered in the Electra 225 series. The sole Electra 2-door hardtop was in the standard Electra series.
How long is an Electra 225?
Yes, it meant that the Electra 225 was 225" long in overall length. One big puppy.
When did Buick discontinue the Electra 225?
The Electra and Electra 225 were the same length in 1961. Buick discontinued the Electra nameplate at the end of the 1961 model year, leaving only the Electra 225 starting in 1962. 1962 Buick Electra 225 4-Door Sedan.
What size wheelbase is a 1959 Buick Electra 225?
For 1959, the Electra and Electra 225 both used the General Motors C-body shared with the Oldsmobile 98 and all Cadillac, riding on a longer 126.3-inch (3,210 mm) wheelbase than the B-body LeSabre and Invicta, both of which rode on 123 inches (3,100 mm).
What year was the Buick restyled?
Buick's largest, plushest and most expensive models were restyled for 1963, with distinctive rear fenders culminating in a sharp vertical edge housing narrow back-up lights. The taillights were horizontally placed in the vertical deck cove. A unique cast grille was used at the front. Bright wheelhouse and lower body moldings, with ribbed rear fender panels were used. Red-filled Electra 225 badges were found on the rear fenders, while four VentiPorts lent status to the front fenders. Interiors were cloth and vinyl combinations, while a Custom interior in vinyl and leather, with front bucket seats and a storage console, was available for the convertible and sport coupe. Standard equipment included directional signals, full-flow oil filter, dual speed electric windshield wiper/washers, Deluxe steering wheel, cigar lighter, Step-On parking brake, dual armrests, Turbine-Drive automatic transmission, padded dashboard, heater, defroster, glovebox light, back-up lights, power steering, Glare-proof rearview mirror, power brakes, parking brake signal light, safety buzzer, courtesy lights, two-way power seats, power windows, Super Deluxe wheelcovers, Safety option group, custom padded cushions, Accessory Group options and custom moldings. Buick dropped the Riviera name as a body style designation after the 1963 model year, shifting the Riviera name exclusively to Buick's new personal luxury coupe that had been introduced in 1963. Buick added a 7-way tilt steering wheel and a new cruise control as an option.
What year did Buick 225 have a chrome ventiport?
The 1960 Electra and Electra 225 received a minor facelift with a concave grille and horizontal headlights centered by Buick's then-new " Trishield " logo, which is still in use today. Reintroduced to Electras and other Buicks for 1960 were the chrome VentiPorts first introduced in 1949 and last seen in 1957.
How long is the 1975 Buick Electra?
There was a choice of a base model Electra 225, whose trim and appointments were upgraded to the same level as the previous year's Electra 225 Custom, an upscale Limited, and the Park Avenue. The 1975 Electra was also the longest Buick ever built at 233.4 inches (5,928 mm), which is over 19 feet.
What trim was used on the 225 Electra?
Electra 225 nameplates were found on the front fenders. Electra interiors were trimmed in fabric. Electra 225s were trimmed in Calais cloth or leather trim , except for convertibles which were trimmed in vinyl.
What is the name of the Cadillac 225?
The Electra 225 nameplate was a nod to the latter car's overall length of over 225 in (5,715 mm), earning it the street name "deuce and a quarter.". The Electra 225 Riviera was the top-line model and it shared its six window hardtop roofline exclusively with Cadillac (which offered it on all of its models).
