How much does a shipping container pool cost?
The larger the shipping container pool the greater the cost will be versus the smaller shipping container pools, due to shipping costs increasing with cube measurements rather than surface area. A larger shipping container pool may cost in excess of $24,000 based on shipping costs alone.
How much does a container pool cost?
One of the biggest complaints is that shipping containers can be quite expensive once the total cost of ownership is added up. Larger container pools can cost more than $40,000 to buy, assemble, and install depending on how fancy you go with all the customizations available and the spot.
Are shipping container pools cheaper?
They're often cheaper than other types of pools. Small shipping container pools can cost you less than $17,000 (not including additional charges like water features or deck construction). These smaller pools might give you 96 square feet of space and span around 8 feet across at the widest.
How to build a swimming pool from shipping container?
You can consider adding the following safety features to your pool:
- A protective fence around the pool to bar children’s entry.
- Two ladders at opposite ends of the pool for convenient and emergency exit.
- Stainless steel railing installed throughout the length of the container pool to hold onto something at all times.
- Children step installation with watertight welding to enter the pool from the deck.
How much does it cost to put in a shipping container pool?
$16,500 to $39,900The Price. For comparison, traditional in-ground pools typically cost anywhere from $35,000 to nearly $65,000, with the average price hovering around $49,000, according to the popular home improvement website, HomeAdvisor. For one popular line of shipping container pools, base prices range from $16,500 to $39,900.
Are shipping container pools cheaper?
Like other shipping container structures, shipping container pools are an incredibly cost effective option. The range of cost for the shipping container pools generally falls below the average cost of any traditional or conventional in-ground pool option.
Can shipping container pools be heated?
Now, a Canadian company has found a way to breathe fresh life into the trend, by transforming them into fully functional swimming pools that are not only easily delivered to your backyard and set up in minutes, but come with a built-in heating system so you take a dip year-round, no matter what the climate is where you ...
What is the cheapest pool to install?
vinyl liner poolsGenerally, vinyl liner pools have the lowest initial costs. Thus, you will spend the least amount of money purchasing a vinyl liner pool. On average, vinyl liner pools cost $35,000 to $65,000 to install. Homeowners can customize this pool into various shapes and designs.
How long does a container pool last?
A shipping container can last up to about 25 years. An average above ground pool usually lasts between 10-20 years, including some replacements, but a shipping container pool is even sturdier. It likely will last up to 20 years.
How much is a small container pool?
Small shipping container pools can cost you less than $17,000 (not including additional charges like water features or deck construction). These smaller pools might give you 96 square feet of space and span around 8 feet across at the widest. That's about the size of a standard parking spot.
What is a pod pool?
Poolpod lifts give you independent, comfortable access to the pool, getting you swimming quickly and easily. Unlike traditional pool hoists, you can operate Poolpod yourself, using one of the specially designed wristbands, to access the pool independently.
How do you install a shipping container pool?
2:4010:41How to Install a Shipping Container Pool In Your Backyard - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou cut them in half as you can see over here yeah and then reinforce them with a bit of caffeine toMoreYou cut them in half as you can see over here yeah and then reinforce them with a bit of caffeine to add a bit of integrity into that yeah and then we ship them on to the next stage of the assembly.
How do you build a swimming pool out of a shipping container?
0:552:26How to build a Shipping Container Pool! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAt this stage of the production we marry the fiberglass shell with the upcycled shipping containerMoreAt this stage of the production we marry the fiberglass shell with the upcycled shipping container included in there is a steel skeleton to give it the rigidity required.
What is the smallest inground pool?
How small can an in-ground pool be? Most of the smallest in-ground pools across all pool types, on average, are around 12' by 24', 10' by 15', or even a 10' x 10' Spool/Cocktail pool!
What is the most low maintenance pool?
fiberglass poolA fiberglass pool typically has the highest upfront cost but the lowest maintenance cost. They are quick to install, but because they're built from a mold the shape is not customizable (and they can't be wider than 16 feet). A vinyl pool has the lowest installation cost and can be built to any size and shape.
Whats the cheapest option for an inground pool?
Overall, vinyl liner pools are the cheapest inground swimming pools that money can buy. It's rare to find a pool builder who can build a concrete or fiberglass pool at a vinyl liner pool price. This does not mean that vinyl liner pools are never expensive.
What is a Shipping Container Pool?
Shipping container pools refer to modular, often pre-fabricated, swimming pools made out of upcycled (used) shipping containers. They’re typically cheaper to buy and build compared to traditional swimming pools. Container pools can start at as low as $28,000 and range up to $50,000.
Installing a Shipping Container Pool
Now, let’s consider how you can install shipping container pools in your own home. Installation is easy and quite practical, but may still cost some money. It’s why you should make sure not to let a single small mistake cost you.
How Are Shipping Container Pools Built?
There is no single, predetermined way to build a shipping container pool, and different builders may have a different approach depending on their operation. But the general process goes like this…
How Much Does a Shipping Container Pool Cost?
According to Shipping Container Pools, a 6-meter pool starts at US$25,000 while a 12-meter pool starts at US$32,000. Then again, the exact price of a container pool depends on the builder that you choose, the location, as well as the size of the pool.
FAQs
A shipping container pool can leak if the construction doesn’t include proper reinforcement with steel and other materials. It will also help to coat the inner portion of the container with a waterproof layer and use a watertight welding process to ensure that the pool can last as long as possible.
Wrap Up
Overall, a shipping container pool may be just what you need. Like a traditional pool in the ground, it can provide fun in your own backyard, but it’s also more affordable and offers some unique advantages.
What is shipping container pool?
A shipping container pool comes as fully functional units. It comes with plumbing, heating and electrical systems already installed as well as other features. With this pool, all you need to do is get the foundation ready. When the pool is delivered you will install it, fill it up with water and you are good to go.
What is a pool liner?
Also known as a vinyl liner, a swimming pool liner is a membrane that covers the pool’s interior surfaces. Photo Credits: PORT SHIPPING CONTAINERS. It helps to hold or contain the pool waters. Shipping container pools do make use of these liners to help make them watertight.
Why do you need a heater in a pool?
A heater is an absolute necessity to help in the control of the temperature of your container pool water. Many of you that live in a warm climate may think that a heater is not that important to have. In any case, you are the people that can benefit the most from having a heater in your container pools.
What is a 0.5HP pool pump?
Your container pool, therefore, should have a quality and efficient pool pump. A pump that is functionally effective in moving pool waters daily through the filtering system to remove dirt and unwanted debris off it. A 0.5hp swimming pool pump.
Do you need a filtration system for a pool?
As such, you have to ensure that your container pool has a fully functional filtration system . Most pools, especially the outdoor ones tend to accumulate lots of dirt and debris. Filtration system – Photo Credits: STACK EXCHANGE.
Can you use a window in a shipping container pool?
Well, yes that is a window built to help make the pool less ‘normal.’. On one end the window is a put there as a design feature, and on the other end, it can be used as a safety feature – to help monitor kids in the pool. Basically, these are the main parts and components of a shipping container swimming pool.
How big is a container pool?
Almost all container pools are built from the most common container sizes, 20 ft and 40 ft long general-purpose units. Some companies have grafted multiple containers together to make longer or wider pools, but this is rare. So in the vast majority of cases, your pool is going to be an 8 ft wide rectangle, 20 to 40 ft long.
Where is the container pool in South Africa?
It’s one of several pools used at the primary schools in the Ekurhuleni suburban area near Johannesburg, South Africa.
Why are container homes so popular?
Container homes are famous for their strength and durability, and container pools have the same traits. The steel boxes underlying a container pool are used to supporting enormous loads and dealing with the stresses of open-sea travel.
How many gallons of water is in a 40 ft pool?
A 40 ft container pool that’s about 4 ft deep has a volume of ~9500 gallons. That means that just using a half-depth container for the pool, you’re still looking at around 75,000 pounds of water. And that’s before you add in the weight of the empty container and any modifications you make to it!
How deep should a pool be?
Oftentimes, the top few feet of the container are cut off, making the pool 3 to 5 feet deep (and less heavy). While it’s possible to graft two containers together and make a pool that is longer or wider than a standard container, this is uncommon and fairly expensive.
What is shipping container made of?
Shipping containers are made from weathering steel with a special alloy mixture that causes them to quickly form a thin layer of oxidation that shouldn’t go deeper into the material or flake off. However, this isn’t a 100% solution and container rust can be a real problem without proper care and maintenance.
What color is a container liner?
Additionally, it gives a pleasant hue to the container interior (usually light blue) and provides a softer, slightly textured surface that is durable yet pleasant to the touch. There are actually quite a few options available for the liner. Some companies use premade fiberglass shells.
Why Choose a Container Pool?
There are many reasons to choose a container pool versus a concrete or fiberglass pool. Shipping containers as a swimming pool can be built and installed at a much lower price than most other types of pools.
Explaining a Shipping Container Pool Video
There are shipping container pool pros and shipping container pool cons that come with purchasing a shipping container pool.
Are Shipping Container Pools Popular?
When looking into pool options for your home there is a wide variety available, this may lead you to wonder about shipping container pools and if they are very popular.
What is the Average Cost of a Shipping Container Pool?
The costs for a shipping container pool are relatively low, compared to traditional pool construction or a custom pool design this is why having a pool from containers is so popular now and continuing to grow.
Is It Hard To Install a Shipping Container Pool?
Overall shipping container pools are a planning difficulty, you have to manage power lines, water pipes, shipping companies etc. The base work to have a functioning pool are going to be work based difficulties with an installation.
Can Shipping Container Pools Be Moved?
One reason that these style of pools have become more interesting for people to purchase is that they are actually able to be moved, for example if you were to sell your house and move you could bring the pool with you.
What Features Can Be Added to a Shipping Container Pool?
There are many features that can be added onto a shipping container pool. Some of the features will include a chiller, lighting, windows, and an automatic system to spray the water.
Where are shipping container pools made?
An Australian company ‘Shipping Container Pools’ based on the Sunshine Coast in sunny Queensland has been creating beautiful shipping container pools for the past four years. Recently we spoke to Nigel Butcher, the company Sales Manager to get some more information about their design and manufacturing process.
How much does a 20ft container cost?
A 20ft container is typically around $2,000 for used and $3,000 for new, plus delivery. If you were to DIY and buy a pump and filter I would think you could have a working pool for around $6,000 all in, but it would depend on the lining used. To buy a ready made shipping container pool you’re looking around $20,000 for a 20ft or $28,000 for a 40ft.
What is a wind tight container?
Although containers are sold as ‘wind and water tight’ that actually refers to the condition of the exterior steel panels and rubber door seals. They’re designed to stop water getting into the container, not to hold a body of water inside them.
Can you weld steel into a container?
One idea would be to weld steel sheeting into the container. If you choose this option you’ll need to rust proof the panels and also be sure to use a certified welder, or at least someone with considerable experience because you need the welds to not only be strong, but also water tight.
Can you use a crane to set up a container pool?
Yes you can do that. With the use of a crane you can set the container pool wherever you like during the final placement. Thanks for your kind feedback on our site. A 20ft container is typically around $2,000 for used and $3,000 for new, plus delivery.
How much does a pool enclosure cost?
A pool enclosure costs $5 to $65 per square foot or between $4,000 and $50,000 on average. Pool cages are either custom-built or prefabricated with either screen mesh, glass, plastic, or vinyl. Enclosures reduce insects, debris, and pollen, provide UV protection, and enable swimming year-round.
How much does a beach entry pool cost?
Beach entry pools cost $87 per square foot on average, with most homeowners paying between $50 and $125 per square foot. Also known as a walk-in pool or a zero-entry pool, it has a gradually sloped entry into the pool—in the same way you would walk into the water on a beach.
How much does an inground pool heater cost?
An inground pool heater costs $550 to over $10,000, with another $400 to $500 for installation. The difference in prices for inground pool heaters is primarily how much water you need to heat, and what the rise in temperature is from the average coldest temperature to the desired water temperature.
How much does a semi inground pool cost?
A semi-inground pool costs under $10,000 on average. Oasis semi-inground pools are constructed from extruded aluminum or steel and cost between $6,800 and $8,500. Semi inground pools are more expensive than an above-ground pool but about a third of the price of an inground pool of equal size.
How deep is an inground pool?
Inground Pool Sizes & Prices. The average swimming pool size is 14’ by 28’, and 6.5 feet deep but some homeowners have either a higher budget or less space for an average size pool. For head-first diving, a depth of at least 9 feet is recommended by The Red Cross.
How much does it cost to install an inground pool?
The average cost to install an inground pool is $35,000 with most homeowners spending between $28,000 and $55,000. The additional cost of pool ownership for basic maintenance, increased utilities, and repairs add $2,500 to $5,000 every year.
How much does it cost to build a 10x16 pool?
Small inground pools such as a 10x16 plunge pool or a 10x20 cocktail pool costs $14,500 to $24,500 to install and are 5.5 to 7 feet deep. The cost of a small or mini inground pool rises when selecting concrete instead of vinyl, adding a deck, installing a cover, or adding a privacy fence.
WHY BUY A CONTAINUR POOL?
Our fiberglass shell means no pool liner, no flaking off, no rust, and no deterioration.
Shipping Container Pools
With more than 50 design awards and a team of talented pool builders and designers with more than 100 years of experience combined, Lucas Lagoons is setting the bar high with their unique luxury pools and natural rock lagoons that have captured not only Florida but the world!
try our custom 3d pool builder
Design and customize the perfect pool and get a real-time estimate using our 3D pool builder.
Modular
Every Modpool is uniquely configured to suit your needs, from the length and width to the added features.
Smart pool
Easily control the temperature, jets, and lighting of your Modpool from anywhere using your smartphone.
fill & chill
Unlike conventional pools that can take weeks to pour and cure, your Modpool can be up and running the day of its arrival.
hot tub
Add a Modpool divider wall to quickly and easily convert your Modpool into a hot-tub, and back to a pool again.
What customers are saying about us
Great product and process. Modpools provided a design package and engineering which helped me get approvals from a difficult coastal San Diego city. Shipped on schedule and was carefully packaged. Awesome that it was craned in place and installed in one day.
