Where is the sewage ejector pump located?
sump basinSewage ejector pumps are usually installed in a sump basin in the basement floor. The sewage ejector pumps liquids and solids up into the sewer or septic line. Because of elevations in the low country it is not uncommon that we have ejector pumps in our homes.
How do I know if I have a sewage ejector pump?
What is an Ejector Pump? If the pump has two pipes and is an ejector pump, you can identify that by the sealed lid, 2 pipes penetrating the lid, discharge pipe attached to the main sewer and the pipes will be at least 2 inches inside diameter.
What's the difference between a sump pump and ejector pump?
What's the Difference between Sump Pump and Ejector Pumps? Sump pumps are used to prevent flooding in areas where houses are below the water table line, while ejector pumps generally are used with a sewage system to help remove sewage.
What does ejector pump look like?
An ejector pump often looks just like a sump pump and is also installed in a basin in the floor.
What are the two pumps in my basement?
Well, a sump pump is there to protect your basement from water flowing in. An ejector pump, on the other hand, is there to pump water from uses inside the basement out. So if you go to the bathroom or wash your hands in the sink or anything like that, the waste water is pumped by the ejector pump to the outside.
What happens if ejector pump fails?
Since gravity alone can't remove the waste from the home, what happens if that crucial step – the ejector pump – one day fails? If that occurs, flushed water and waste can build up in the pipes and eventually burst – usually at their lowest point, which for most homes is the basement.
What drains into ejector pump?
For ejector pumps handling greywater or processing wastewater with human waste, a vent pipe will be attached to the lid to allow for the venting of sewer gases. The ejector pump has a discharge pipe that runs into the sanitary sewer line which carries waste to the municipal sewer or private septic tank.
What's the difference between a sewage pump and a sewage ejector pump?
The sewage pump, sometimes called a sewage ejector pump, is used when a bathroom, laundry room, or any other type of plumbing fixture is located below the level of the main floor.
How long does an ejector pump last?
7 to 10 yearsWhile most sewage ejector pumps are designed to withstand at least 7 to 10 years of use, with some even lasting much longer, occasionally problems do arise long before the pump has reached the end of its life span.
How do you maintain an ejector pump?
How to Maintain Your Ejector Pump:Clean and prepare the pump. Turn off the circuit breaker and water source to the pump so it doesn't turn on while you are working. ... Check the oil. ... Inspect pump impeller. ... Tighten connecting elements. ... Assess bearing damage. ... Ensure your seals remain tight. ... Clean your vents.
Do sewage ejector pumps smell?
When property owners complain they have sewer gas smells by a sewage ejector or grinder in the basement or by their pump tank, you should take that complaint seriously. Hydrogen sulfide is dangerous even at low levels.
Is ejector pump part of plumbing system?
An ejector pump is sometimes part of a home's plumbing system. At times, it's necessary to install a washing machine, toilet, sink, or other water-using items below ground level. Unfortunately, this can also put them lower than your sewer line.
WHAT DOES AN EJECTOR PUMP DO?
An ejector pump is an in-home lift station that pumps sewage from a lower level up to the height of an existing municipal sewer line. Homes with basement bathrooms have these because their waste has to get up to the height where it can be whisked away by a benevolent coalition of underground mole people.
EJECTOR PUMP VS. SUMP PUMP
Many people see an ejector pump and assume it’s just another sump pump. The ejector pump vs. sump pump question has been floating around for ages. But despite looking quite similar, ejector pumps and sump pumps actually do very different things.
WHY AN EJECTOR PUMP FAILURE MATTERS
Ejector pump problems are often the result of improper installation. It’s also possible that the tank is too small. In either case, if you see raw sewage leaking, don’t waste any time calling a trained professional.
CONTACT Plumbing One Today
We're your plumbers in Columbus, Ohio. Give us a ring for upfront pricing on full-service commercial and residential solutions!
Where does the ejector pump collect water?
Rather than collecting ground water from drain tile, the ejector pump’s basin will accumulate water from floor drains, “ grey water ” from a washing machine and/or “slop sink” or, when the home has a below-grade bathroom, waste water.
What is a sump pump?
Sump pumps and ejector pumps are both important parts of a home’s water management system and a malfunction of either can create a destructive mess.
What happens when a sump pump fails?
If a sump pump fails or is overwhelmed, the basement will flood; they typically have battery back-up pump systems alongside.
How many inlets are there in a sump pump?
Typically, there will be two inlets in a sump basin that connect to either end of a drain tile system, either interior or exterior. Water collected by the drain tile flows to the sump basin and accumulates there until the level rises high enough to trigger the sump pump’s float switch.
Where is the second sump pump located?
In many homes, though, particularly in those with finished basements, there is often what appears to be a second sump pump, often located near the washer and dryer. It is often identical, or at least very similar, to the other sump pump and some homeowners are perplexed as to why it’s there and what it does. In fact, this second pump is usually an ...
Who installs sump pumps?
Sump pumps are usually installed by basement waterproofing contractors who offer a wider range of longer-life pumps and who are experts at removing water from a basement, regardless of its source and can offer homeowners more option for ejector pumps as well.
Does a gray water pump have a vent?
A pump that handles only gray water and/or water from floor drains will probably have a lid but no vent. In either case, the discharge pipe from an ejector pump will always be connected to a sanitary sewer line just like the home’s plumbing fixtures.
What is an ejector pump?
An ejector pump is a pump that replaces gravity during the transportation of waste from a plumbing space that is situated underneath the remainder of the system. Ejector pumps are typically used when homeowners want to add an extra bathroom to their basement.
Is it expensive to install an ejector pump?
Not only are ejector pumps expensive, they are also difficult to install. If an ejector pump is a requirement for home modification it is a good idea to hire a professional plumber to do the job.
Knowing What To Look For: Ejector Pumps
An ejector pump is an integral part of your pressurized septic system. Here’s how it works and what to keep in mind when it’s time for maintenance.
The System
Waste from your home is taken by gravity to the septic tank. There, the waste separates into one of three products. Sludge sinks to the bottom, scum floats to the top and effluent water remains center and flows through the system.
Being Mindful
Here are three common reasons for needing to do maintenance or replacing your ejector pump altogether.
Why do you need an ejector pump?
An ejector pump is necessary when the basement of a home contains a bathroom or a laundry room. Because these fixtures are located below the level of the main sewer line , and also because the flow of wastewater depends on gravity , an ejector pump is required to elevate the wastewater so it can flow out of the home properly. ...
What is the purpose of a basement bathroom ejector pump?
The main purpose of basement bathroom plumbing with an ejector pump is to pump wastewater from bathroom drains out and away from your home. Read on to learn why ejector pumps are a necessary item to have in your home.
How does a sump pump work?
The drain lines from the basement plumbing all lead to the sump pit. When wastewater reaches a certain height, the pump begins pumping the sewage up to the level of the sewer line, where it is then pumped out of the home. This process repeats every time the pit fills.
How often should I replace a sewage pump?
Although you should replace your sewage ejector pump every 7-10 years, these checks can help your pump operate at its peak efficiency and help you avoid sewage ejector pump problems. It’s a good idea to perform the checks below at least seasonally: Check that the pump pit is free of debris that can build up over time.
