what does code po307 mean

Full Answer

What does DTC code po307 mean?

What does code po307 mean? When the P0307 diagnostic trouble code is stored by the Powertrain Control Module (PCM), it is an indication that a misfire has been detected in cylinder 7. More specifically, the PCM detects an increase or decrease in crankshaft revolutions per minute (RPM) that exceeds 2%. Click to see full answer.

What does the code P0300 mean?

• There is likely to be a distributor cap and a rotor button system on aged cars. ...
• If the PCM has reserved other relevant error codes, the mechanic will be required to interpret and fix up these problems as preferred. ...
• If the P0300 error code reappears, the condensation system needs to be tested. ...

More items...

What does code P0300 mean?

The P0300 code means that the car’s engine has detected an issue with at least one of its cylinders. Usually, this happens when a spark plug is either not functioning properly or too much unburnt fuel in any of the engine’s cylinders.

What does code P0300 stand for?

Code P0300 Definition. P0300 – Random or Multiple Misfire Detected. What does the P0300 code mean? The code P0300 indicates there are repetitive misfires on one or more cylinders in your car. You will often find this code together with another code of the specific cylinder the misfire occurred on.

What could cause a P0307 code?

P0307 Causes Misfires can be caused by many reasons from a faulty ignition system, fuel system, or internal engine failure. The most common reason for this to happen is faulty or worn-out spark plug coil packs, especially if it's been a while since you had a tune-up.

How much does it cost to fix a cylinder 7 misfire?

However, it's dangerous to drive with a malfunctioning cylinder, so have your vehicle diagnosed and treated before you get back on the road. The cost of repair and replacement can range from anywhere between $100 to $1000, depending on the reason for the misfire.

What's a cylinder 7 misfire?

0:384:21P0307 Explained - Cylinder 7 Misfire (Simple Fix) - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo 12 cylinder engine it won't be happening in your 4 or 6 cylinder engines. Now let's explain whatMoreTo 12 cylinder engine it won't be happening in your 4 or 6 cylinder engines. Now let's explain what a misfire is at its core a misfire is the d' synchronization of the combustion cycle within your

What happens if you don't fix a cylinder misfire?

If left untreated, a cylinder misfire can lead to significant engine damage. Worse, if you experience a bad misfire while driving, it could result in an accident. This is why it's important to treat engine misfires as soon as you detect them.

Can a misfire ruin an engine?

An engine misfire can be caused by bad spark plugs or imbalanced air/fuel mixture. Driving with a misfire isn't safe and can damage your engine.

Will changing spark plugs fix a misfire?

Dirty or Old Spark Plugs If your engine is misfiring, you may be able to fix the problem easily by replacing your spark plugs. Spark plugs are relatively easy to remove from engines and inspect for damage, and at less than $25 a piece, they are relatively cheap to replace, too.

How do you test a coil pack?

1:127:49How to Test an Ignition Coil Pack - Best Testing Procedure - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it on DC voltage. Ground your black test lead and then on the connector. Side you start checkingMorePut it on DC voltage. Ground your black test lead and then on the connector. Side you start checking for voltage.

Can you drive with a misfire?

While you can still drive a car with a misfire, it's not a good idea. A misfire could be a sign of several different engine issues. If you continue to drive without resolving the issue that caused the misfire in the first place, it could potentially cause more extensive damage to your engine over time.

What does multiple cylinder misfire mean?

When a P0300 trouble code is triggered, it indicates that misfiring occurs in random or multiple cylinders. This happens when there is a deficient amount of fuel being burned within a cylinder. Most cars have between four and six cylinders, with each cylinder firing a spark plug continuously and smoothly.

Can a misfire correct itself?

However, most misfires dissipate, and your engine regains its normal speed after a second or two. But even a single misfire is usually a sign that something else is wrong and that more misfires will likely occur in the future.

How long can I drive with a misfiring cylinder?

In theory, you could drive thousands of miles with a cylinder that misfires. The other cylinders in the engine will continue to operate, so even though you may shake and stall along the wall (and not get much in the way of speed or acceleration), the car will still run.

Can low oil cause misfire?

Low engine oil can cause a misfire, and it is very likely that the cause of the misfire was indeed the low oil pressure in your vehicle. There are three common ways low oil can cause a misfire: Your oil filter is damaged, reducing oil flow, causing improper valve timing, and resulting in a misfire.

Is a misfire easy to fix?

Usually, fixing a misfire is a pretty straightforward repair. However, there could be a deeper issue causing it, so it's always a good idea to have a professional mechanic look under your hood.

Can I drive with a cylinder misfire?

While you can still drive a car with a misfire, it's not a good idea. A misfire could be a sign of several different engine issues. If you continue to drive without resolving the issue that caused the misfire in the first place, it could potentially cause more extensive damage to your engine over time.

How far can I drive with a cylinder misfire?

In theory, you could drive thousands of miles with a cylinder that misfires. The other cylinders in the engine will continue to operate, so even though you may shake and stall along the wall (and not get much in the way of speed or acceleration), the car will still run.

How much does it cost to fix a cylinder?

The cost to repair a cracked cylinder varies between different model cars. The minimum cost you can expect to pay is $500, but with parts and labor costs it could easily go to $1,000. Then depending on your make, model, seriousness, and where you take your vehicles for repairs, it may cost you $2,000 or even more.

What are the symptoms of a P0307 code?

Here are the common symptoms associated with the P0307 code: Hard Starting Engine.

What vehicles have code P0307?

Vehicles that are prone to code p0307 include various models of Ford (especially Ford F-150), Chevrolet, GMC, Lincoln, and Cadillac. What are the Possible Causes of the P0307 Code? Since engine misfire is a very broad problem, there are many triggers that may cause this to happen.

What is the code for cylinder 7 misfire?

Diagnostic trouble code (DTC) P0307 stands for “Cylinder #7 Misfire Detected.” This code is logged when the powertrain control module (PCM) perceives that your vehicle’s cylinder #7 may be misfiring. This indicates that incomplete combustion is happening inside the cylinder.

What is the OBD code for engine misfire?

There are several OBD-II diagnostic trouble codes related to engine misfires. In this article, we will talk about the OBD code P0307.

Can you diagnose a misfire in cylinder 7?

It may sometimes be difficult to diagnose and determine what is really causing the fault. It is always the best option to bring your vehicle to an auto repair shop for proper diagnosis. Diagnostic and repair procedures for an engine misfire in cylinder #7 may vary depending on your car’s year, make, and model.

What is P0307 in a car?

When the P0307 diagnostic trouble code is stored by the Powertrain Control Module (PCM), it is an indication that a misfire has been detected in cylinder 7. More specifically, the PCM detects an increase or decrease in crankshaft revolutions per minute (RPM) that exceeds 2%.

How does a mechanic diagnose the P0307 code?

Uses an OBD-II scanner to get all of the trouble codes and freeze frame data that has been stored by the PCM

Why does my car have a trouble code for a different cylinder?

If a new trouble code comes back for a different cylinder, it is an indication that the misfiring condition is being caused by the wire and/or coil pack. It may also be possible that the vehicle is in need of a tune-up. It is also necessary to gap the spark plugs properly, as not doing so can cause a misfiring condition.

What is the code for a misfire on a cylinder 7?

P0307 is a diagnostic trouble code (DTC) for "Cylinder 7 Misfire Detected". This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic for $0.0 . Once we are able to diagnose the problem, you will be provided with an upfront quote for the recommended fix and receive $20.0 off as a credit towards the repair. All our repairs are backed by our 12-month / 12,000-mile warranty.

What is the code for fuel injectors?

Inspects the fuel injectors and fuel injector wiring if the P0307 code returns after any damaged spark plugs, coil packs, spark plug wires, and/or coil pack wiring has been replaced

What does that mean?

This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles. Although generic, the specific repair steps may vary depending on make/model.

Possible Solutions

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

Other Reading

P0401 code with P0307 code [color=#0040FF] [b]I have a '98 Ford E-350 van, with the V-10. I just noticed that the engine was running rough, but no codes came up. It wasn't until I pulled in my driveway, that the 'check engine soon' light finally came on. I already knew what it was, as I already had to change one coil pack s...

Need more help with a p0307 code?

If you still need help regarding the P0307 trouble code, please post your question in our FREE car repair forums.

What Does Code P0307 Mean?

The Misfire monitor diagnostic is based on variation in crankshaft velocity. The PCM determines this information using the crankshaft position sensor and camshaft position sensor. A misfiring cylinder slows down momentarily, so by monitoring the cam and crank sensor signals, the PCM can calculate when a misfire occurs. A P0307 code tells you only that a misfire has been detected, not WHY the cylinder is misfiring. That’s why with this code, a thorough diagnosis is mandatory.

How do you troubleshoot code P0307 ?

Often, the best way to troubleshoot a single cylinder misfire is to swap ignition components between the misfiring cylinder and a good cylinder. If the misfire moves with the sparkplug (for example) then the sparkplug would be the cause of the misfire. If switching components with a good cylinder doesn’t eliminate the original misfire then there could be a problem with compression.

Circuit Description

The crankshaft position (CKP) sensor is the primary input to determine if misfire is occurring. Engine misfire is detected by monitoring crankshaft speed variations between cylinders. If a crankshaft deceleration occurs during a combustion or power stroke, the control module will compare this change in crankshaft speed to the previous cylinder.

Conditions for Running the DTC

If start-up ECT temperature is below minus 7°C (20° F), misfire detection is delayed until ECT temperature is more than 21°C (70°F). If start-up ECT temperature is more than minus 7°C (20°F), misfire detection begins after a 5 second delay.

Conditions for Setting the DTC

The VCM detects a deceleration in the crankshaft speed characteristic of either an emission type misfire or a catalyst damaging type misfire.

Action Taken When the DTC Sets

If the VCM determines that the engine misfire is significant enough to have a negative impact on emissions, the VCM turns ON the malfunction indicator lamp (MIL) after the misfire has been detected on 2 non-consecutive trips under the same operating conditions.

Conditions for Clearing the MIL or DTC

The control module turns OFF the MIL afterXXXXXtrips when the test has run and passed.

Diagnostic Aids

The Misfire Index counts the number of misfires. The scan tool can monitor the Misfire Index. There is a current and history misfire counter for each cylinder. Use the current misfire counter in order to determine which cylinder is misfiring or use the history misfire counter for misfires that are not currently present.

What Does That Mean?

Symptoms

Causes

• A code P0307 may mean that one or more of the following has happened: 1. Faulty spark plug or wire 2. Faulty coil (pack) 3. Faulty oxygen sensor(s) 4. Faulty fuel injector 5. Burned exhaust valve 6. Faulty catalytic converter(s) 7. Running out of fuel 8. Poor compression 9. Defective computer

See more on obd-codes.com

Possible Solutions

Related DTC Discussions

Need More Help with A P0307 Code?