If you travel on an undivided two-way roadway with four or more lanes, the center of the road is marked with a solid double yellow line. Don’t drive to the left of the center, unless you must cross the lines to turn left. Solid yellow lines mark no-passing zones. You may not cross these lines to pass other vehicles.
Can you cross a double solid line in a left turn?
Crossing a double solid line is prohibited. left turn only lane Solid white lines are used for turn lanes and to discourage lane changes near intersections. Arrows are often used with the white lines to show which turn may be made from the lane.
Is it illegal to cross a solid line on the road?
Furthermore, the law is strict in these circumstances and can result in penalty points of a full or provisional drivers licence and a fine. It is illegal to cross a continuous solid white line if the solid line is on your side of the road, except under certain conditions.
What does the center line look like on a two-way road?
On undivided two-way roadways with four or more lanes the center line always consist of a solid double yellow line. The lines mark where crossing the center for passing is allowed or not allowed.
Can you cross a double white line on the road?
Some double continuous white lines have narrow areas of hatched lines within them or a wider area of hatching to the side. You must not cross a continuous white line to enter a hatched area. This means you may cross the lines to overtake if it is safe, provided you can complete the manoeuvre before reaching a solid white line on your side.
What does do not cross a solid double line in the center of the roadway to quizlet?
Use the left lane for passing only. If double yellow lines are used to separate carpool lanes from normal lanes, don't cross these lines until they are broken or there is a designated enter/exit spot. Never cross double yellow lines used to block off walls or dividers.
What do double solid lines in the center of a road mean?
A double, solid yellow centerline shows the center of a two-way road. Even if it is not marked with a NO PASSING sign, passing by traffic traveling in either direction is not allowed on roads marked in this manner.
What does a solid line indicate?
Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes.
What does it mean when the pavement is marked with two center lines one solid one?
Passing is permittedWhen the pavement is marked with 2 centerlines, 1 solid and 1 broken: Passing is permitted only on the side with the broken line.
What do double solid lines mean?
no passing in any directionDouble solid lines mean no passing in any direction. A broken yellow line parallel to a solid means the traffic on the broken side of the road can pass when safe to do so. Traffic on the solid side of the configuration is not permitted to pass.
When can you cross a double white line?
You are only allowed to overtake on double white lines to pass a stationary vehicle, or one travelling at 10 mph or less, according to the Highway Code. Drivers can also legally cross the lines to turn into a property or side road as long as it's safe.
What does a double solid white line mean quizlet?
Double Solid White Line. Separates two lanes of traffic going in the same direction. Crossing a double solid white line is prohibited. Turn Lane Arrow. If lane has turn only, turn if the lane has a go straight or turn, you may go straight or may turn in direction of arrow.
What is the meaning of double solid yellow line?
no passingWhen a solid and a broken yellow line are together, you must not pass if you are driving next to the solid line. Two solid yellow lines mean no passing. Never drive to the left of these lines.
What does a double white line mean?
White lines separate lanes for which travel is in the same direction. A double white line indicates that lane changes are prohibited. A single white line indicates that lane changes are discouraged. A dashed white line indicates that lane changes are allowed. Symbols are used to indicate permitted lane usages.
Can you pass on a double yellow line in PA?
You may cross the broken white lines to pass, (be sure the passing lane is clear) but you may not cross the double yellow centerlines to pass.
When the center roadway marking of a two way roadway is a single broken yellow line it means?
A single, broken yellow centerline shows the center of a two-way, two-lane road. Passing is permitted on either side, if safe conditions exist. When passing, you must use the lane belonging to oncoming traffic.
Is it normal to drive in the center of broken lines?
3) Broken white center line or lane divider It is a reminder to stay in your lane. Straddling the line is illegal and punishable under the law. As the line is “broken,” however, this means it is legal to cross it when overtaking or changing lanes.
Why do you drive to the left of the yellow line?
Obviously, you may drive to the left of solid yellow center lines when you are instructed by construction workers, traffic officers, or traffic signs to drive on the other side of the road because your side of the road is closed or blocked. Sometimes only traffic in one direction is allowed and the flow ...
What does a broken yellow line mean?
What They Mean. The lines mark where crossing the center for passing is allowed or not allowed. A normal broken yellow line tells you that passing is allowed (a passing zone). When there is one broken and one solid line, traffic traveling adjacent to the broken line can pass (passing zone) and traffic traveling adjacent to ...
What is a normal broken yellow line?
On two-lane, two-way roadways you are likely to find any of these center line markings: A normal broken yellow line. A double yellow line, one of which is a normal broken yellow line and the other is a normal solid yellow line. Two normal solid yellow lines. On undivided two-way roadways with four or more lanes the center line always consist ...
Is a slow moving vehicle considered an obstruction?
A slow-moving vehicle is generally not considered an obstruction – but it can be in certain situations. Many states have made a clear exception for slow moving bicyclists. In Colorado, as an example, the no-passing law does not apply to:
Can you cross the line in one direction?
Normally, you are also allowed to temporarily cross the lines if there is an obstruction on your side of the road. A slow-moving vehicle is generally not considered an obstruction – but it can be in certain situations.
Can you cross a double yellow line?
It is a common misunderstanding that you cannot cross a double yellow center line under any circumstances. In fact, you may cross them in some situations. Where two normal solid yellow lines mark a no-passing zone, you may not drive on the on left side of the roadway or on the left side of the pavement striping to pass.
What is the white line on a road?
A solid white line marks the edge of the pavement on most roads. Stop lines, crosswalks and parking spaces are also marked by white lines. Symbols such as arrows are in white also. A single yellow line marks the left edge of all divided or one-way roadways.
Why are lines painted on the road?
Lines, symbols and words are often painted on a roadway to help direct drivers and control traffic flow. You must know what the different lines and colors mean and obey them as you would traffic signs or signals.
What is a yellow line?
Yellow lane lines separate lanes of traffic moving in opposite directions. Single yellow lines may also mark the left edge of the pavement on divided highways and one-way streets. broken yellow line
Why do we use solid white lines?
Solid white lines are used for turn lanes and to discourage lane changes near intersections. Arrows are often used with the white lines to show which turn may be made from the lane.
Why do highways have reversible lanes?
Some highways have reversible traffic lanes to help handle rush-hour traffic. The direction of traffic is normally reversed at set times each day. These pavement markings are used along with special lane signals and other signs and symbols.
What does a broken white line mean?
A broken white line separates two lanes traveling in the same direction. Once you have signaled, and if it is safe to do so, you may cross this line when changing lanes.
What is a center turn lane?
Two-way roadway with a center lane for left turns in either direction of travel. The specially marked center turn lane is intended for slowing down and for sheltering turning vehicles and may not be used for passing.
What does a solid white line on your side of the road mean?
Solid white line on your side of the road means you must not cross the line except for the above circumstances. Vehicles in the opposite lane may cross the line.
What does it mean when you cross a line?
Double white lines where the line nearest to you is broken. This means you may cross the lines to overtake if it is safe, provided you can complete the manoeuvre before reaching a solid white line on your side.
Why do we use double white lines?
Double white lines are used to inform drivers of a hazard and where a continuous solid white line is present, prohibit drivers from overtaking as it is too hazardous to do so. Double white lines also to separate opposing traffic flows on steep hills with climbing lanes.
What is double white continuous line?
Double white continuous lines can also occasionally be used on single carriageway roads to divide lanes traveling in one direction. A driving test can easily be failed by incorrectly following the rules of double white lines on the road.
What is the fine for crossing a double white line?
The fine for crossing double white lines where the line nearest to you is solid often results in a driving conviction code TS50 – Failing to comply with traffic sign (excluding ‘stop’ signs, traffic lights or double white lines – resulting in 3 penalty points and a £60 fine.
Is it illegal to cross a solid white line?
Crossing double white lines. It is illegal to cross a continuous solid white line if the solid line is on your side of the road, except under certain conditions. You are permitted to straddle or cross a continuous solid white line to enter a side road or property, to manoeuvre round a stationary vehicle blocking your side of the road, ...
Do you cross a continuous white line?
Some double continuous white lines have narrow areas of hatched lines within them or a wider area of hatching to the side. You must not cross a continuous white line to enter a hatched area. Double white lines where the line nearest to you is broken.
What is a double yellow line?
A double yellow line, one of which is a normal broken yellow line and the other is a normal solid yellow line. C. Two normal solid yellow lines (a double yellow line). A normal broken yellow line marks a two-direction passing zone.
What does a yellow line on the side of a lane mean?
A center lane with a normal broken yellow line and a normal solid yellow line on each side indicate a two-way left-turn lane. This lane is used by traffic in either direction as part of a left-turn maneuver.
What is a special lane use signal?
Special lane-use control signals show you if you can use a reversible lane or not. Pavement markings in a reversible lane consists of a normal broken double yellow line on each side of the lane.
What do the white and yellow lines on the DMV signify?
When you see white and yellow lines separate travel lanes or mark the center of the road, they tell you if traffic is traveling in one or two directions.
Why are free lane capacity important?
Free lane capacity is used to improve traffic flow in peak hours and during special events.
What is a normal white line?
A normal or wide double white line – prohibits crossing. Dotted white lane lines separate a through lane from deceleration or acceleration lane, or a through lane that becomes a mandatory exit or turn lane. A normal broken white line separates lanes where you are permitted to change lanes.
What is the line on the right side of a divider?
There is usually one on each side of the divider. The right edge of the roadway is marked with a normal solid white line (edge line). Remember: if there is a yellow line is on your right and a white line on your left, you are going the wrong way. A yellow (center) line must always be on your left!