Whirlpool duet front load washer error code hf If there is the HF error on the screen, the machine is not getting water or it has difficulty detecting a pressure switch trip. If the main control board does not detect water feeding into machine, the system will block the valves and display the error code.
Why does my Whirlpool duet washer have error codes?
Whirlpool Duet washers have digital LED displays. Most of the time, this is to display time, especially on cycles. But they serve another purpose and that I to display error codes. Error codes are used to communicate any issues that the washing machine may be experiencing.
What does f0e1 mean on a duet washing machine?
The F0E1 error means that your Duet washing machine has detected that there is a load during the cleaning cycle. If that is incorrect, then it is an indication that there is mechanical friction. Mechanical friction can create a drag when the inner drum rotates, which can wear it down quickly.
What does F3 mean on a whirlpool washing machine?
F3 is related to the washer sensor while F5 faults are door switch and door lock related. Having a basic understanding of these error codes and what they may relate to can help even the most amateur of DIYers not only determine a resolution but come to one in short order.
Why does my Kenmore washer keep saying F05?
If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, or the heating element circuit has failed, the “F/05” error code will be displayed. The control is unable to properly detect motor speed and the machine will shut down.
What does flashing F and H on a Whirlpool Duet washer?
This error code will be displayed if the machine is trying to fill with water but the flow meter doesn't sense any flow for 30 seconds. In this case, check the water supply to be sure you have good pressure for both hot and cold water. Then, consider replacing the flow meter.
What does code H mean on Whirlpool Duet washer?
When the display shows a number up to 12, followed by an "h", it means that the Delay Wash has been activated. Most front load washers can be set to delay the wash for up to 8 or 12 hours (depending on your model).
How do you clear the error code on a Whirlpool Duet dryer?
How to Clear Whirlpool Duet ErrorWrite the error code down so you won't forget it after it is cleared.Press the "Pause/Cancel" button on the control panel twice to clear the error.More items...
How do you clear the error code on a Whirlpool Duet washer?
0:522:03Whirlpool Duet Washer Diagnostics & Error Codes - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've reached the last saved fault code you will hear three beeps. You can clear the codesMoreOnce you've reached the last saved fault code you will hear three beeps. You can clear the codes from the washers memory by pressing and holding the third button again for five seconds.
What does H mean on washing machine?
The machine will now commence the cycle when you press the start button. Should a 'H' with a number be shown the display, for example 'H02' then the delay start has been activated. The number indicates in how many hours in the future, the machine will start.
Does unplugging a dryer reset it?
Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That's it. That's all it takes to reset.
What are the codes on a Whirlpool Duet dryer?
Whirlpool Duet Dryer Troubleshooting CodesCodeProblemF30Restricted airflowF28, F29Moisture sensor failureF01Main electrical control board failureF02Keypad or user interface failure2 more rows•Jul 17, 2022
Why is my Whirlpool Duet dryer not spinning?
If your Whirlpool dryer won't spin properly, the drum rollers may be worn out. You can check the rollers for wear and tear to see if they turn easily. If any of the drum rollers are damaged or don't spin easily, we recommend replacing all of them at the same time as a preventative measure.
What does H and F mean on washer?
FH Error Code FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.
What are the codes for Whirlpool?
Error Codes in my Whirlpool Front Load WasherError CodeErrorSud or SdThere are too many suds in the washing machine.F5 E2The door is not locking properly.F7 E1Indicates a motor speed sensing error,F8 E1 or LO FLThe washer is sensing a low flow of water.7 more rows•Apr 11, 2022
How do I read a Whirlpool washer error code?
1:253:30Identifying a Whirlpool Fault Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control board f06 indicates a motor speed error the control board cannot identify the motorMoreThe control board f06 indicates a motor speed error the control board cannot identify the motor speed check the tacho coil on the motor for continuity f08 indicates an open circuit on the heater.
How do you clear the error code on a Whirlpool top load washer?
Press START/PAUSE once to clear the code, then press START/PAUSE again to restart washer. If the code doesn't clear, Contact Us or Schedule Service Online. Hot and cold inlet hoses have been installed incorrectly (reversed).
Who said if you do then the tube on the other end to the tub is connected?
Jon Grella : If you do then the tube on the other end to the tub is connected.
What is the pressure switch on a washing machine?
Jon Grella : In your machine there is a pressure switch that controls how much the tub fills with water. If the wash is set for a normal load size it knows when to and how much water it needs to fill the tub with
What are the Error Codes on a Whirlpool Duet Washer?
Before we get started, it helps to take a step back. Whirlpool Duet washers have digital LED displays . Most of the time, this is to display time, especially on cycles. But they serve another purpose and that I to display error codes.
What does an F error mean on a washer?
Whenever you see an F error, you can rest assured that it has to do with a door issue. There are three primary faults having to do with the washer door: switch fault, lock fault, and unlock fault. When the washer isn’t properly closed, it will not move forward with the load.
What is the code for a washer that is overflowing?
F8E2 and E3 are your dispenser and overflow fault codes. The latter is especially not fun because if it doesn’t pick up on the fact that your washer is about to overflow, you could be in for a major mess. Error codes may allow you to resolve the issue on your own. At the very least you can pass along the code to a technician who can implement a fix.
What does F5E2 and E3 mean?
The F5E2 and E3 error codes have to do with the lock and unlock fault. When you get the door lock fault code, it means that your washer tried to lock the door and couldn’t, failing at least 6 times before coming back. Triggering the E2 code could also mean that one of the tabs on the machine door’s inserts failed him.
What is the good thing about Whirlpool error codes?
The good thing about these error codes is that Whirlpool makes them easily discernable. There will be no question that something is wrong when one of these error codes flashes. The error and fault codes use E# and F# numbers.
What is an error code on a washing machine?
Error codes are used to communicate any issues that the washing machine may be experiencing. Not every modern washing machine has this option, meaning the user would have to troubleshoot the issue on their own to find a solution.
What is the difference between F3 and F5?
We will get into them further on, but your F1, F2, and F6 codes all relate to the main control. F3 is related to the washer sensor while F5 faults are door switch and door lock related.
