LG Dishwasher Error Codes
- Water Supply. The “IE” error code indicates a problem with the water inlet. ...
- Drainage Issues. A drainage problem causes “OE” to be displayed on the digital display panel. ...
- Other Water Issues. “FE” is displayed if the dishwasher is supplied an excessive amount of water. ...
- Heater Malfunction. ...
- Temperature Alert. ...
- Power Failure. ...
What does ie error code mean on LG washer?
When the LG Washer IE Error Code is displayed, it means that the Washer was not able to fill with water. This is also referred to as a WATER INLET ERROR.
What do the error codes on the display of the dishwasher mean?
An error code on the display of the dishwasher can usually be resolved by performing a few simple troubleshooting steps. Watch this video to learn about Understanding Error Codes - LG Dishwasher. An IE error code indicates that the level of water in the unit did not get high enough after 10 minutes of filling.
What does ie mean on a whirlpool washing machine?
An IE error could mean a number of things: the inlet valve is faulty, or one of the drain hoses is clogged, or there’s simply not enough water pressure. In the coldest months of the year, you might run into an issue where the washer won’t fill with water.
What does 1E mean on LG washing machine?
Some users of LG washing machines take the IE code for the 1E code. The IE error means that your washing machine fills slowly (the error occurs after 4 minutes), or the washer won’t fill at all. The probable causes of the problem
How do I fix IE error on LG dishwasher?
Make sure water pressure is 20 - 80 psi. Make sure the water valve is fully opened. Check the water supply hose. Make sure that the line is not kinked or sharply bent....Check the following for the IE error:Check the water pressure.Check the water tap or valve.Check the water supply hose.Check the water supply.
How do I reset IE code on LG dishwasher?
0:100:56LG Dishwasher Error Codes IE - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn a dishwasher an ie aerocode is an indication that the correct water level has not been reached inMoreOn a dishwasher an ie aerocode is an indication that the correct water level has not been reached in the dishwasher. Within the expected time frame in most cases this error code can be corrected
How do I clear the IE code on my LG washing machine?
An IE error code indicates that the washer was unable to fill with water....Turn off the home's hot and cold water supply taps/valve.Remove the water inlet hoses from the washer. ... Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.More items...•
What does code 1E mean on LG dishwasher?
LG Dishwasher 1E error code is programmed to indicate that the drain pump is running, and it is not receiving the back pressure that is needed. This also indicates that there is water leakage in the draining system.
How do I fix my e1 LG dishwasher?
0:063:45[LG Dishwashers] Resolving AE & E1 Error Codes On An LG DishwasherYouTubeStart of suggested clipEnd of suggested clipIf you are seeing an ae or e1 error code on your lg dishwasher it indicates a possible leak. ThisMoreIf you are seeing an ae or e1 error code on your lg dishwasher it indicates a possible leak. This message code is usually the result of an overflow caused by either the unit not being level or the
Is there a reset button on an LG dishwasher?
There are several methods to reset a dishwasher. The most common method is to press the start/restart button and leave the appliance undisturbed for a few minutes. Also, shut the power to the appliance off via the house circuit breaker or fuse box.
How do I fix error code 1e?
Samsung washing machine IE error – Possible solutionsDo a hard power reset. You need to unplug your Samsung washing machine for about 5 minutes as this will normally reset most of the electronic glitches or any other issues with software that may be present. ... Ensure proper wire connection. ... Replace the pressure switch.
How do I clean my LG inlet filter?
0:461:59LG Washer : How to Clean the Water Inlet Filter | LG - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt may be difficult to remove the filter by hand. So using a pair of needle long nose pliersMoreIt may be difficult to remove the filter by hand. So using a pair of needle long nose pliers carefully pull out the filter. Now use a soft cleaning brush to remove dirt from the filter.
What does ie stand for on washer?
The IE error code on the LG washers display is indicating water did not fill the tub or it did not fill properly in the allotted time. This can be from a faulty water inlet valve, drain hose issue, bent water hoses, the water valves to the washer are not “open”, or there may be a communication or wiring harness issue.
How do I test my LG dishwasher drain pump?
0:051:38How To Diagnose a Bad LG Dishwasher Drain Pump OE ERRORYouTubeStart of suggested clipEnd of suggested clipEither the drain pump is bad or there's a blockage in the drain line. You can force the dishwasherMoreEither the drain pump is bad or there's a blockage in the drain line. You can force the dishwasher to drain by turning on the dishwasher. And pressing the normal button then hold down the delicate.
How do I fix e1 error on washing machine?
Possible SolutionsCheck that the water faucets are not closed.Check that the water pressure in the house is over 20 kPa.Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement.Check that the drain hose is not below 27½" (700 mm) from the floor.
How do I fix the UE on my washing machine?
The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself....Run rinse and spin cycle without load.Empty the drum completely.Power the unit on.Select the RINSE AND SPIN cycle.Press start.
What does it mean when your LG washer says Le?
The LE error code means that the motor in your washing machine is locked. It's usually due to a simple reason, like your washer is overloaded, but sometimes it can be a more serious issue that takes a lot more effort to fix.
What is the model number of a Bosch dishwasher?
Dishwasher by Bosch identifiable by the model number SHU5315UC-06 or SHU5315UC/06.
What is the purpose of a water inlet valve in a washing machine?
Water Inlet Valve. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly.
Why does my washer not fill?
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
What does IE mean on LG washer?
When the LG Washer IE Error Code is displayed, it means that the Washer was not able to fill with water. This is also referred to as a WATER INLET ERROR. Washing machines use sensors to keep track of how full they are, and when the sensor doesn’t pick up enough water, the sensor triggers an error code and shuts the whole thing off.
What does IE mean on LG washing machine?
When an IE error code shows up on your LG washing machine, you know there’s some issue with the water supply. Luckily the fix is simple: follow this guide on how to fix your LG and get back to doing the laundry you love.
How to fix LG washer IE?
If not properly set and the washer still doesn’t fill up properly, you should check this valve for faults. Check each water valve solenoid using a multimeter to make sure it is working properly. Replace any faulty valves with new ones to solve the LG Washer IE Error Code.
How to check if a washer hose is clogged?
To check for clogged or kinked hoses, you should start by turning off the water source to the washer. This can usually be found behind the wall next to the appliance. Then, simply pull out the washer and check for any kinks or bends. If you see any, simply adjust them with your fingers and set the washer back in place.
Why won't my washer fill with water?
This is because frozen water lines are blocking the flow of water to your washer.
What to do if water level sensor is faulty?
To troubleshoot a faulty sensor, you should use a multimeter to test if the component is working correctly. If it’s not, replace it with a new one and run a test wash to ensure that your machine is running smoothly.
What is the water inlet valve on a washer?
The water inlet valve is responsible for letting water into the front of the washer. It’s controlled by two solenoids — one for hot, one for cold. Some newer models have a water volume switch to control how much water reaches the drum, while other models have switches on their hard controls.
Why does LG Dishwasher show 1E error code?
LG Dishwasher 1E error code is programmed to indicate that the drain pump is running, and it is not receiving the back pressure that is needed. This also indicates that there is water leakage in the draining system. So, below is the list of all the possible problems and solutions that you need to know to fix the LG Dishwasher 1E error code.
Why does my dishwasher keep water?
The way the pots and pans are positioning can cause the dishwasher to retain water that fills the dishwasher. This can cause the dishwasher to error out and think that there is a leak. Make sure all large pots and pans loaded inside the dishwasher are positioned in the racks correctly.
Why is my dishwasher draining early?
Drain hose outlet is installed lower than the base of your dishwasher may cause early draining. This can be the cause of the 1E error code. The height of the end of the drain hose must be over 10 inches from the bottom of the dishwasher. This is to prevent water from being siphoned from the tub too early. Check the drain hose for damage that may ...
When to replace dishwasher drain hose?
Replace the dishwasher drain hose if it is found to be damaged or leaking water.
How high should the drain hose be on a dishwasher?
The height of the end of the drain hose must be over 10 inches from the bottom of the dishwasher. This is to prevent water from being siphoned from the tub too early. Check the drain hose for damage that may cause leakage. Replace the dishwasher drain hose if it is found to be damaged or leaking water. Also Read | Where is Ake's boat in AC Valhalla?