Whirlpool Washer Won’t Unlock: Reasons and Fixes
- Wash Cycle Has Just Finished With most modern washers, you have to wait two to three minutes after the end of the wash cycle before the door will open. ...
- Water Is Still in the Drum On a front loader, if there’s water in the drum, the door won’t unlock. ...
- Blocked Pressure Switch Hose The pressure switch controls the water in the washer. ...
- Faulty Door Interlock ...
How do you unlock a whirlpool washer?
How to Unlock a Whirlpool Washer
- Method 1 Method 1 of 3: Opening a Front-Loading Washer. Hit Cancel to stop the load and unlock the door. ...
- Method 2 Method 2 of 3: Accessing a Top-Loading Washer. Push the Start/Stop button to unlock the washer door during the spin cycle. ...
- Method 3 Method 3 of 3: Unlocking the Door Manually. Power down the washer. ...
How do I unlock my Whirlpool washing machine?
Method 3 Method 3 of 3: Unlocking the Door Manually
- Power down the washer. Press and hold the Power button to turn off the machine. ...
- Seal off the faucet. After the washer is completely unplugged, close the water faucet that feeds into the machine.
- Get to the drain pump access door by unscrewing the cover. ...
- Tug on the plastic cord in the compartment to unlock the washer door. ...
How to unlock a whirlpool washer?
How to Unlock Whirlpool Top Load Washer. To unlock the top load washer, turn off the power switch located near the front door handle. Remove the two screws holding the panel together. Slide the panel toward the back of the unit. Pull the plastic tab on the right side of the panel. This releases the locking mechanism.
How do you unlock the control on Whirlpool duet washers?
Where is the control lock on Whirlpool washer?
- Locate the " Control Lock /Unlock" button on your Duet's control panel.
- Press and hold the " Control Lock /Unlock" button for three seconds.
- Release the " Control Lock /Unlock" button when the control lock icon on the display disappears.
How do I unlock the Control Lock on my Whirlpool washer?
To turn off Control Lock, press and hold the Options key that says "Control Lock Hold 3 Sec" under it for 3 seconds.
How do I get the Control Lock off my washing machine?
0:151:02Front Load Washer Control Lock Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control lock icon on the display will light up when it is on press and hold again for 3 secondsMoreThe control lock icon on the display will light up when it is on press and hold again for 3 seconds to unlock the washer.
Why is my Whirlpool washer stuck on Control Lock?
The most common cause of a Whirlpool washer door being locked and not being able to open is a faulty lid switch (including the striker). The door switch locks and unlocks your door depending on which stage your wash cycle is at. When it becomes defective, your washer door may not unlock when it's supposed to.
How do I reset the control panel on my Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.
How do I unlock my Whirlpool front load washer?
Whirlpool Front Load washer door locked at installThe door may immediately unlock.The door lock LED light will blink. The door should unlock after 60 seconds. ... The washer will go into a hold and drain routine for 8 minutes. After 8 minutes the door will unlock.
How do I manually open my Whirlpool washing machine door?
How to Manually Open the DoorTurn off and unplug the washer/dryer.Close the water faucet.Wait until the drum has stopped rotating – never open the door while the drum is in motion.Wait until water and laundry have cooled down when washing with high temperatures.
How do you force a washing machine to unlock?
It works by heating up and expanding, so even when the washing machine is switched off the door won't unlock immediately. The trick is to leave the washing machine disconnected for about five minutes so the lock can cool and release. Then you should be able to open your door. Sometimes the thermal lock will stick.
How do I get the control lock off my Whirlpool dryer?
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
Is there a way to reset a Whirlpool washer?
0:203:46How to Do a Whirlpool Washer Reset & Recalibration - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust below the washer dial. And that includes whirlpool maytag kenmore roper amana admiral andMoreJust below the washer dial. And that includes whirlpool maytag kenmore roper amana admiral and crossly brand end washers. We can do the first two resets in sequence. So first rotate your washer's
How do I reset my Whirlpool top loader?
This is a handy technique for top loading Whirlpool washers.Turn the machine off manually via the control panel.Unplug the machine.Wait 1 minute before plugging the appliance back in.Open and close the lid six times within 12 seconds.Wait for a beep or for the control panel to light up to ensure it's reset.
Why is my washer locked and won't turn on?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do I turn off the control lock on my LG washer?
1:051:51LG Washer : How to set the Child Lock| LG - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control panel will unlock and a chime will sound. And that is how to set the control lock onMoreThe control panel will unlock and a chime will sound. And that is how to set the control lock on your lg washing. Machine it's that simple. Thank you for using lg washing.
How do I turn off the child lock on my automatic washing machine?
4 To deactivate the Child-Lock function, press and hold both the Rinse and Spin buttons simultaneously for 3 seconds again. If the Child-Lock function is deactivated, the Child-Lock icon is turned off. 5 To clear “CL” error on the display, close the door of the washer after completely draining the water in the tub.
How do I turn off child lock?
A child safety lock is on the rear edge of each rear door. You must set the child safety lock separately on each door. Turn the key clockwise to switch the child lock on and counter clockwise to switch it off. Turn the key counter clockwise to switch the child lock on and clockwise to switch it off.
How do I turn off the key lock on my Samsung washing machine?
1 Close the washing machine door.2 Tap the additional functions button.3 Turn the navigation dial to select Child Lock.4 Tap the select button.5 Tap the select button to select On or Off.6 The Child Lock icon will turn on when the function is on.
What You Need
To unlock control lock on whirlpool washer, you don’t need any power tools. If you don’t have any experience using mechanic gadgets, you can rest easy and follow the tutorial without using one.
What to Do to Unlock Whirlpool Washer Control Lock
Before you can unlock your washer, you need to make sure it’s plugged in first. After the washer has started, look for the button that indicates “Control Lock”. It is usually located on the panel at the top of the washer. Once you have found the panel, look for the unlocking button, then proceed to the next step.
Frequently Asked Questions
Reset the washer by unplugging it for 30 seconds to solve this problem. Once done, run a duet washer quick diagnostic test. Press the Pause/Cancel button if you want to stop diagnosing the washer.
Conclusion
Did you learn much from our tutorial on how to unlock Whirlpool duet washer control lock? If your washer is not working, check if it is in the lock mode, then follow the instructions above. It will only take you a few seconds. Aside from that, you don’t need tools to unlock your washer.
Why is my Whirlpool washer door locked?
In other cases, the door may lock because of a mechanical error before the cycle even starts . If your Whirlpool washer door is locked and won’t open, here are a few simple things to try. These quick fixes can help get your machine back online before delving deeper to find the root of the problem.
Why won't my Whirlpool washer unlock?
There are several possible reasons why your Whirlpool washer door won’t unlock. A flashing light indicates some kind of malfunction, but identifying the underlying issue can take some digging. Here are some possible causes.
Why doesn't my washer know when to unlock the door?
It’s possible that the optical speed sensor is not correctly reading the motor speeds. If that’s true, the washer doesn’t know when the machine stops and therefore doesn’t know when to unlock the door.
Why do washing machines lock?
Washing machine doors feature automatic locks to avoid opening the door during a cycle and flooding your house. These locks typically unlock at the end of the cycle, but sometimes malfunctions trap your clothes inside. In other cases, the door may lock because of a mechanical error before the cycle even starts.
How to unlock a washer?
Some washers come with a control lock button on their dashboard. If your model has a button like this, press and hold it for three seconds. You should hear the door unlock and be able to retrieve your clothes.
How long does it take for a washing machine to shut off?
From that point, the door will stay closed for 180 seconds (three minutes). If the water in the cycle is very hot, it may take an extra few moments for the water to cool and drain.
Where is the door lock on a washing machine?
You can usually find it on the front of the washing machine at the bottom right corner. There should be one screw holding on this panel. Remove it and open the compartment to reveal a plastic cord hanging from the top. Pulling this cord will disengage the door lock and should allow you to open the washer door.
Check Control Lock On Whirlpool Washing Machine
Before you go ahead and buy your new washing machine, make sure to check the control lock on whirlpool washing machine. If you see a “P” written next to the setting, you will need to get a new washer. It means that the control has been locked.
Use the Right Instructions for Your Whirlpool Washing Machine
Once you have checked that the control lock on whirlpool washing machine is there, then it’s time to go look for the instructions for your washer. There should be some kind of manual or instructions included with the washer. If not, you may want to ask your local store to get you some.
Check the Service Manual
If the control lock on whirlpool washing machine is really locked, then you may need to go ahead and take your old washer to the manufacturer to get it repaired. If it’s an older model, then you may need to pay a hefty repair fee.
Change the Control Lock On Whirlpool Washing Machine Yourself
If you know what you’re doing, you may be able to change the control lock on whirlpool washing machine yourself. So if you’ve got a few spare hours, then it shouldn’t take you too long to do this. But you should definitely check out some videos online before you try this.
What is the control lock on a front load washer?
The Control Lock feature on Front Load Washers can prevent any selections from being made when activated. The controls can be locked or unlocked after a cycle has started. Children cannot accidentally start the washer by touching pads with this option selected.
How to lock a washer?
To lock or unlock the washer controls: Press and hold the LOCK button for 3 seconds. A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when the feature is on. The POWER button can still be used when the machine is locked.
What You Need
What to Do to Unlock Whirlpool Washer Control Lock
- Step 1: Look for the unlocking button of the washer
Before you can unlock your washer, you need to make sure it’s plugged in first. After the washer has started, look for the button that indicates “Control Lock”. It is usually located on the panel at the top of the washer. Once you have found the panel, look for the unlocking button, then procee… - Step 2: Press the unlocking button for about three seconds
Once you have seen the unlocking button, press and hold it for about three seconds once you have seen it. You will see a “Loc” icon disappear on the panel. This means that you have successfully unlocked the washer. If this doesn’t work, unplug the washer for five minutes and re…
Frequently Asked Questions
- 1. What will I do if my duet washer won’t lock?
Reset the washer by unplugging it for 30 seconds to solve this problem. Once done, run a duet washer quick diagnostic test. Press the Pause/Cancel button if you want to stop diagnosing the washer. - 2. Why does my duet washer leak?
There are many reasons why your duet washer leaks. If the washer is leaking even when turned off, check its valve or water supply. But if it’s leaking only when running, take a look at the door boot, drain pump, and hose.
Conclusion
- Did you learn much from our tutorial on how to unlock Whirlpool duet washer control lock? If your washer is not working, check if it is in the lock mode, then follow the instructions above. It will only take you a few seconds. Aside from that, you don’t need tools to unlock your washer. Do you know friends who need some help with their locked washers? Please share this post with them! We al…