What does LF mean on a Maytag Bravos washer?
The LF in the washer code error means “long fill.” It means the washer is taking too long to fill up with water. The main control will shut down if it doesn’t get a signal from the water pressure sensor indicating the water is at the proper level. The error pops up when the control panel shuts down. What do I do to reset my Maytag washer?
What does LF mean on a whirlpool washing machine?
What does LF stand for? The LF in the washer code error means “long fill.” It means the washer is taking too long to fill up with water. The main control will shut down if it doesn’t get a signal from the water pressure sensor indicating the water is at the proper level.
What does error code F8 E1 mean on Maytag washer?
F8 E1 or LF or LO FL Error Code in the Display of my Maytag Washer Error Code F8 E1, LF, or LO FL all indicate that no water is detected entering washer after 13 minutes. Depending on your model, you could see any one of these error codes. See your Owner's Manual for further assistance.
What does long drain mean on a Maytag Bravo washing machine?
Long drain is the fault code for the Maytag Bravo washing machine. When the machine is taking too long to drain the tub, this error code shows. The sewage pump may be to blame for this. Is the drain hose kinked or blocked? A code F9 E1 appears if the black drain pipe on the washing machine’s back is kinked or clogged.
How do I fix the LF on my washing machine?
When "LF" is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve.
What does low FL mean on Maytag washer?
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
How do I fix my Maytag washer with LF error?
LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.
How do you fix LO FL?
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water....If code is still displayed:Unplug the washer or disconnect the power for one minute.Plug in the washer or reconnect the power.Re-select the cycle and press Start.
What does Fl mean on a washing machine?
washer failed to lock the doorCodeMeaningdLThe door was unlocked while the washer was running.dSThe door was opened while the washer was running.FLThe washer failed to lock the door.HrWasher temperature control problem.1 more row•May 17, 2022
How do I reset my Maytag washer?
The easiest way to reset a Maytag washer is to disconnect the power to the washing machine for three minutes. Disconnecting the power allows the electrical charge to dissipate from the washing machine, which allows it to reset. If the reset fails, unplug the washer again, this time leaving it unplugged for ten minutes.
How do I fix error code F9 E1 Maytag?
The Maytag washer code F9 E1 means the water in the drum is too long to drain out....Resetting the MachineUnplug the washing machine from the wall outlet.Let it sit for 10 minutes.Plug it back in and turn it on to see if it starts draining.
What are the error codes on a Maytag washer?
Error Codes in your Maytag Top Load Washer:Error codeErrorLdLLid is not locking.LdULid cannot unlock.LF, Lo FL or F8 E1The washer is taking too long to fill.lidThe washer lid was left open.7 more rows•Jun 16, 2020
Why is my washer LF?
When "LF" is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer. Once the hoses are disconnected, you may have to scrape the sediment from the screens using a knife or sharp object.
How to remove error display on washer?
To remove the error display, press Power once. Then press Power again to restart the washer.
How to reset a washer?
If pressing Power does not work: 1 Unplug the washer or disconnect the power for one minute. 2 Plug in the washer or reconnect the power. 3 Re-select the cycle and press Start.
How long does it take for a washer to drain after a code?
You will not be able to pause or cancel the cycle for about 8 minutes while it drains. This is normal.
What does LF mean on a Maytag washer?from howtofixit.net
The Maytag washer code LF means water isn’t filling the drum within the programmed time set within the appliance’s control system. It only tells you the symptom that water isn’t flowing into the machine but doesn’t tell you why. That is up to to you to diagnose and fix.
Why is my washer LF?from producthelp.maytag.com
When "LF" is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer. Once the hoses are disconnected, you may have to scrape the sediment from the screens using a knife or sharp object.
How can I get into the diagnostic mode on my Maytag washer?from howtofixit.net
Running a diagnostic test should be done with caution. There are moving parts working and the tests bypass some of the machine’s safety features.
Are Maytag washers still reliable?from howtofixit.net
Maytag washers have always been the affordable, reliable standard many people stick with . The lower price point wins many people over and some can last for more than 20 years.
How do you clear an error code from the Maytag washer display?from howtofixit.net
You should first work to correct the problem the code is indicating. Clearing it without fixing the problem won’t do any good because it will just pop up again.
Why is my Maytag washer not letting water flow?from howtofixit.net
Several things could be causing water flow issues with your Maytag washer. It could be either a problem with the drain hose or with the water inlet hose or filter.
How to reset a washer?from producthelp.maytag.com
If pressing Power does not work: 1 Unplug the washer or disconnect the power for one minute. 2 Plug in the washer or reconnect the power. 3 Re-select the cycle and press Start.
What does LF mean on a washer?from producthelp.maytag.com
The LF in the washer code error means “long fill .” It means the washer is taking too long to fill up with water. The main control will shut down if it doesn’t get a signal from the water pressure sensor indicating the water is at the proper level. The error pops up when the control panel shuts down.
Why is my washer LF?from producthelp.maytag.com
When "LF" is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer. Once the hoses are disconnected, you may have to scrape the sediment from the screens using a knife or sharp object.
How can I get into the diagnostic mode on my Maytag washer?from howtofixit.net
Running a diagnostic test should be done with caution. There are moving parts working and the tests bypass some of the machine’s safety features.
Are Maytag washers still reliable?from howtofixit.net
Maytag washers have always been the affordable, reliable standard many people stick with . The lower price point wins many people over and some can last for more than 20 years.
How do you clear an error code from the Maytag washer display?from howtofixit.net
You should first work to correct the problem the code is indicating. Clearing it without fixing the problem won’t do any good because it will just pop up again.
Why is my Maytag washer not letting water flow?from howtofixit.net
Several things could be causing water flow issues with your Maytag washer. It could be either a problem with the drain hose or with the water inlet hose or filter.
How to reset a washer?from producthelp.maytag.com
If pressing Power does not work: 1 Unplug the washer or disconnect the power for one minute. 2 Plug in the washer or reconnect the power. 3 Re-select the cycle and press Start.
