Overlay cabinet hinges mean that they allow the cabinet door to “lay over” the frame of the cabinet. If your current doors are larger than the frames — eg. they don’t settle into the frame when closed — then you likely have overlay hinges already (hidden or semi concealed).
How to adjust a cabinet hinge?
[Explained]
- Detect the Hinge Type of Your Cabinet Door. Adjustable hinges can be moved side to side, up, down on some cabinets. ...
- Adjusting Old Cabinet Hinges. If you’ve correctly identified the hinge type, it is time to begin the task. ...
- FAQs. Question: What do you do to maintain hinges? ...
- Conclusion. ...
How to measure your cabinet door overlay?
Steps:
- The first step is to close the cabinet door. (Fig. ...
- Once you have located the hinged side of the door, place a piece of tape on the face of the cabinet and flush to the door in a vertical position. ...
- Open the door so you can see the edge of the tape.
- Now, measure the distance from the inside edge of the tape to the frame opening. ...
How to replace hinges on cabinet doors?
Method 3 Method 3 of 3: Replace with a Different Type of Hinge
- Purchase new hinges at the home improvement store.
- Place a small line, using a pencil, at the center point where the old hinge attached to the door. ...
- Place a small line, using a pencil, at the center point of where the old hinge attached to the cabinet frame.
- Line your new hinges up on your door. ...
How many hinges should a cabinet door have?
No matter what type of cabinet door you are looking to hang onto your cabinets, you will always need two cabinet door hinges. Unless the door is very heavy where you may need a third, two hinges are typically required. Cabinet door hinges are placed on the top and bottom of the side of the door. 2. Opposite Cabinet Door Pull
What is an overlay on cabinet hinge?
The overlay is the amount or distance that the cabinet door overlaps the cabinet opening on the hinge side of the door. Normally, this distance is the same on both sides of the cabinet opening and will range from 3/8" to 1-9/16".
How do I know my overlay hinge?
0:541:46How to Measure Your Cabinet Door Overlay - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the style of hinge that you have you may want to remove the door. So you can measure the overlay.MoreOn the style of hinge that you have you may want to remove the door. So you can measure the overlay.
What does 1/2 overlay cabinet hinge mean?
A 1/2″ overlay literally means that all the drawers and doors of a cabinet run will extend half an inch over the frame. This is a classic styling for cabinetry and leaves about two inches of exposed frame in between cabinet doors.
What is the standard overlay for cabinet doors?
A Standard Overlay door will lay on top of (overlay) this 1.5” face frame 3/8”, leaving 1-1/8” revealed on all rails and stiles. A Full Overlay door will overlay that same 1.5” face frame 1.25”, leaving a ¼” reveal on the sides (stiles) and bottom (rail).
How do I know what cabinet hinges to buy?
The construction of your cabinet – most notably, the overlay of the face frame and the cabinet door – determines which cabinet hinge you need. Similarly, where your drawer slides need to be mounted dictates what type of drawer slide you need.
What is the difference between an overlay hinge and an inset hinge?
Full Overlay Doors give a similar appearance to that of inset doors without the higher cost. They completely cover the cabinet face, providing the flat cabinet front so desired in inset cabinets.
How do I know what size cabinet hinges I need?
You should check the diameter of the hole in the door that your current hinge sits in - these are usually 26mm, 35mm or 40mm for larger hinges. It's important to measure the hole in the door and not the hinge itself as the hinge may be slightly smaller.
What is the difference between half and full overlay hinges?
Full overlay hinges are used for individual cabinets or cabinets on either end of a row of cabinets. Half or Partial overlay hinges are used for a pair of cabinet doors in the middle of a row of cabinets where two doors have their hinges mounted on opposite sides of a shared middle partition.
What is the difference between partial and full overlay?
Partial overlay cabinets cover most of the cabinet frame but leave space between the drawers and doors. This is typically the least expensive cabinet option and is a top choice for people who want to leave off hardware. Full overlay leaves no space between each door/drawer and thus requires hardware.
What is the difference between standard and full overlay cabinets?
Doors: Standard doors have hinges that allow for 180-degree opening, whereas full overlay doors can only open 120 degrees in order to preserve their durability.
How much should a cabinet door overlay?
The industry standard for most cabinet doors is a 1/2 inch overlay around the cabinet door. To create a 1/2 inch door overlay on all four sides, add 1 inch to your total height, and 1 inch to your total width.
Is full overlay the same as frameless?
Full overlay cabinets still show approximately 1/4-inch reveal of the face frame while frameless cabinets do not show any frame reveal.
How much overlay is a full overlay hinge?
3/4″A full overlay hinge will “fully” overlay a 3/4″ panel and a half overlay hinge will cover half of a 3/4″ panel. There are 4 factors to look at in order to determine your final cabinet door overlay: Overall Door Size.
What is the difference between full overlay and half overlay hinges?
Full overlay hinges are used for individual cabinets or cabinets on either end of a row of cabinets. Half or Partial overlay hinges are used for a pair of cabinet doors in the middle of a row of cabinets where two doors have their hinges mounted on opposite sides of a shared middle partition.
What is a full overlay hinge?
A full overlay hinge is a type of European hinge with a completely straight arm which makes the offset much greater than partial overlay or inset hinge styles. This allows the door to completely overlay the cabinet box. Use these for full overlay doors.
What is the difference between full overlay and partial overlay cabinets?
Partial overlay cabinets cover most of the cabinet frame but leave space between the drawers and doors. This is typically the least expensive cabinet option and is a top choice for people who want to leave off hardware. Full overlay leaves no space between each door/drawer and thus requires hardware.
1. What is included in a pair of hinges?
A pair of hinges includes 2 complete hinges of your choice as illustrated below: Pair of Hinges Pair of Hinges If you need 3 hinges per door and ha...
What is our return policy?
Any item may be returned or exchanged within 30 days of purchase. A 20 % re-stocking charge will apply to all returns. Items must be returned in th...
When should I invest in stainless steel hinges?
One of the main questions we get asked at Hinge Outlet is should I purchase stainless steel hinges? This is a very good question. Customers living...
What is a Double Action Spring Hinge and what is it used for?
Other names for double action spring hinges are as follows: Café Door Hinges Saloon Door Hinges Double Swing Hinges Double Action Hinges Double act...
How do I select the right door hinges for my home?
If this is your first attempt at purchasing door hinges for you home, you may be in for a big surprise. Many times, customers call us and ask for t...
How do I measure a door hinge?
You need to understand how to measure a hinge. It is very easy. You start by measuring from top to bottom and then from side to side. Once you have...
How do I determine the size and hole pattern for my exterior residential doors?
Residential Exterior doors include the following: Entry doors Doors leading to your backyard Doors leading to and from your garage Most residential...
How do I determine the size and hole pattern for my interior residential doors?
Residential interior doors include the following: Bathroom doors Bedroom doors Closet doors Dining room doors Basement doors.
What is the difference between ball bearing butt hinges, standard plain bearing butt hinges, and spr...
Ball bearing hinges have two ball bearings in the knuckles of the hinges. The standard plain bearing hinges have no ball bearings. Spring hinges, a...
How many hinges do I need to purchase?
Now that you are educated on the hinge sizes, hole patterns, and types of hinges for residential use, you need to start counting your doors. Once y...
What is a full overlay door?
A full overlay door covers a majority of the side panel (in case of frameless) or frame in face frame applications. The full overlay door is used most often on contemporary, especially frameless European style cabinets.
What is a partial overlay?
Any overlay less than a full overlay is a partial overlay. Most common are half and three-quarter overlays which, as you might expect, conceal half and three-fourths respectively of the cabinet frame.
What is a lipped door?
The lipped door has a groove (also what cabinetmakers refer to as a "rabbit") cut all the way around the door on the back edge. This cut allows part of the door to sit back into the cabinet and leaves the remaining part resting on the cabinet or face frame.
What is overlay hinge?
An Overlay hinge is also just how it sounds, it allows the cabinet door to lay over the frame slightly, or even all the way. An overlay hinge can be completely concealed, or it can be Semi concealed, where the hinge is visible when the cabinet door is closed.
What is the difference between concealed hinges and overlay hinges?
What's the Difference: Concealed Hinges & Overlay Hinges? You've probably heard the term concealed hinges, and overlay hinges. A concealed hinge is just like it sounds, when your cabinet door is closed, the hinge is not visible from the outside. A concealed hinge can be used on doors with an overlay, as well as doors that are inset.
Why do Kitchen Cabinet Hinge Types Matter?
If they’re concealed cabinet hinges, they’re out of the way so that the cabinet doors are the star of the show. If they are visible hinges on the outside of the cabinets, they become a part of the design themselves for better or for worse. Second, hinges serve an important functional purpose. Make sure you know what overlay you want, and make sure you get the right hinge for that overlay, this helps the doors open properly according to where your bore placement may be .
What Else Matters in Hinges?
Since these hinges are hidden, looks aren’t much of an issue. Focus instead on one of the most unpleasant aspects of cabinets — slamming doors. It’s annoying and inevitable, but it’s also completely preventable with the right cabinet hinge types. Soft-close Blum hinges (the only hinges sold by CabinetDoors.com) contain a unique mechanism that makes it impossible to slam the door. No matter how much force you apply, the hinge “catches” the door during closing and brings it softly into contact with the cabinet frame.
Where to Order Your New Hinges?
Plenty of places sell various kitchen cabinet hinge types, but it makes more sense to order through CabinetDoors.com. If you’re also ordering replacement cabinet doors, why not order hinges as well and cross one more thing off your project list? We can also drill hinge holes into your doors, saving you a lot of time and uncertainty, and also making it especially easy to hang the doors. As cabinet doors experts, we know that Blum premium soft-close hinges work perfectly with the custom-built doors we produce and sell directly to consumers like you.
Can cabinet hinges be concealed?
Overlay cabinet hinges can be completely concealed, or semi concealed. As their name would imply, hidden hinges can’t be seen unless the cabinet door is open. They’re entirely concealed otherwise. Overlay cabinet hinges mean that they allow the cabinet door to “lay over” the frame of the cabinet.
What is a 1/2 overlay?
What is a 1/2″ Overlay? A 1/2″ overlay literally means that all the drawers and doors of a cabinet run will extend half an inch over the frame. This is a classic styling for cabinetry and leaves about two inches of exposed frame in between cabinet doors. It is important to be clear when referring to the overlay as half inch because this term can ...
Is half overlay interchangeable?
Half-inch overlay and half overlay are not interchangeable terms because the latter is commonly used to describe the middle of a run of cabinets where the doors share a common single partition wall.
How to measure overlay on door?
Another way to look at door overlay: If your door is 30″ wide and the opening is 28″ wide then then you could calculate your overlay as 30 minus 28 divided by 2 equals 1″. Divided by two because the overlay is measured on one edge, the hinged edge of the door. This method is not recommended as a way to measure your overlay because it is not as accurate as the tape method.
What is face frame cabinet?
A face-frame cabinet is a cabinet which has a front panel into which an opening has been cut. An overlay door is a door which, when closed, lays “on top” of the cabinet opening (no part of the door goes into the opening since the door is larger than the opening). The overlay dimension is simply how much bigger the door is than the opening of the cabinet (as measured on the hinged side of the door).
How many inches does an overlay door have?
A Standard Overlay door will lay on top of (overlay) this 1.5” face frame 3/8”, leaving 1-1/8” revealed on all rails and stiles.
What is the most basic feature of cabinetry?
One of the most basic features of cabinetry is what type of “overlay” is has. When designing cabinetry, it will be one of the first things chosen: Full Overlay or Standard Overlay. Many homeowners are unaware of the difference between the two.
What is Dura Supreme cabinetry?
Dura Supreme cabinetry, Oxford Classic door style, Standard Overlay in Maple, White with Pewter Accent from Drexel in Wisconsin
