Full Answer
Can I use Xfinity stream if I have multiple boxes?
It’s not unheard of to have multiple bad boxes, so much for QA. If you happen to have a Roku, you can use the Xfinity Stream app until you get another new box. I’ll escalate it here to see if you can be sent the newest dvr, unless you need the audio outputs
What does code 222 mean on Xfinity box?
What does Xfinity status code 222 mean? Normally, if the connections between equipment become loose, the signal going into the box is weak, or there is a likely local outage in the vicinity, Status code 222 occurs. What’s the deal with my Xfinity box flickering green?
What is the problem with Comcast phone support?
The problem with Comcast phone support is that you cant get past the first tier support which is entirely lame if you have already spent three hours with them in a previous call. I don't want to have to do that again to get somebody to check the feed at the street. Thanks in advance for any advice you all might have. Thank you for the reply.
Does X1 have the same channels?
Can you use Xfinity Stream on Roku?
About this website
What does PSt on Xfinity cable box mean?
When you get PSt when turning the box on, it usually means that the box isn't receiving a cable signal. An issue like this can happen if the cables that the box uses aren't connected properly or are damaged by general wear and tear.
What does IPSt mean on cable box?
low/bad signal gettingWiderMouthOpen over 2 years ago. FYI IPSt error mean low/bad signal getting to the box. Here is a Comcast post describing the error. You will probably require a technician out to your house.
What input should TV be on for cable Xfinity?
HDMICurrent Xfinity X1 TV Boxes don't support Component Video; HDMI is the current standard for Video connection type. Most TVs manufactured over the past 10+ years have HDMI, so there's a good chance that your TV has an HDMI connection.
How do I reboot my Comcast cable box?
Ensure your cables are tightly secured. Press and hold the Power button located on the front of the TV Box for 10 seconds. The TV Box should automatically restart.
What does PST mean on Cox Box?
That error code means at the time it comes up that the signal levels are bad or unusable. Since it comes and goes, see if there are any splitters that you can remove to help your signal levels.
How do I know if my Xfinity cable box is bad?
How Can I Tell If I Have a Bad Cable Box?Ensure your box and television are receiving power. ... Test your television to make sure a lack of picture isn't because the television isn't working. ... Check all connections between the television and cable box. ... Tune in the television to the correct channel if using a coax line.More items...
Should I be on hdmi1 or hdmi2?
Doesn't matter. Either will work fine. They're just separate inputs.
Which HDMI should my TV be on?
Your best bet for quality is to stick with at least HDMI 2.0. If you're debating between HDMI 2.0 vs. HDMI 2.1, note that gamers and other high-octane users should go all out for the latest HDMI 2.1 TVs and cables that match.
What is the second HDMI port for on the Xfinity box?
What is this? On the back, the Flex has two HDMI ports. One is an HDMI Input, which you can use to host another video source — chances are you will never use this port. The other, labeled HDMI TV, is the one you use to connect it to a display.
Why do I have to reset my cable box every day?
The need to keep resetting your cable modem is because of problems with it. If you leave the connections that send data to the modem open for long, it consumes its memory, making the modem run into bugs, which slows it down. Also, its operating system may freeze, hence the need to keep on resetting.
Why is my Xfinity cable box not connecting?
Make sure you've tightened all cable connections from the wall to your device, turned on your TV and TV Box, checked your remote batteries and that your TV is set to the right input. If none of these worked, tap Continue. We'll scan your device for potential issues. Choose a System Refresh or Restart a Single TV Box.
How do I reset my Xfinity signal?
Log in to your account using your Xfinity ID and password. Scroll down and select Manage Internet. Select Restart Modem to begin troubleshooting. Select Start Troubleshooting to begin your modem restart.
What are the Spectrum error codes?
Spectrum TV App for Android Error CodesDGE-1001 - Service Temporarily Unavailable. ... DFE-1004 - Check Connection. ... DVS-1004 - Unable to Complete Request. ... DVS-1001 - Channel Unavailable. ... DLP-999 - Unable to Complete Request. ... DLC-1001 - Behind Modem Service Error. ... DLI-1010 - Unable to Sign In. ... DCM-1000 - STB Tune Failure.More items...
How do I fix error Spectrum on my cable box?
How to fix it?Inspect the cables. ... Reboot your cable box. ... Resetting the Cable Box. ... Update your Spectrum. ... Delete and re-install the Spectrum App. ... Reboot Spectrum Receiver. ... Check if there are issues with Software Download. ... In Conclusion.More items...
Why is my cable box not getting a signal?
If your TV says no signal but the cable box is on, you need to reboot the cable box. Unplug the cable box from the wall outlet for at least 60 seconds before plugging it back in. If this doesn't solve the issue, check the HDMI port for a bad connection.
How do you fix the TV when it says no signal?
Check the cable connections between the TV and your video device or receiver. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
1Pst on main X1 Box (DVR) | Page 2 | Xfinity Community Forum
I had the same thing happen. Come to find out, the HDMI input on my TV was not working. I took the HDMI cable out of input 1 and put it in input 2 and it resolved the issue.
New DVR box, 1PST, 5(?)PST errors, no signal to TV - reddit
Hello, I just upgraded my account services, and along with that came a new DVR box to replace my old one. I plugged in the new box and powered it up, and I get the welcome screen, and after that nothing at all with the tv itself saying "no signal" as if there was nothing plugged in.
My box is saying boot pst and its stuck on xfinity loading screen ...
Xfinity box not working pst on screen. I have a klu lt7052 that froze on the android screen. i have read to push the volume button and other buttons to reset it.
Error code 1 PSt - TV - TV Forum - Cox Support Forums
You can no longer post new replies to this discussion. If you have a question you can start a new discussion
Resolution to RDK-03004 error and 1PST displayed on just installed x1 ...
I thought this was funny after I finally figured it out. I couldn't get X1 box to connect. Message is to tighten cables and restart. Everything I found...
new X1 box stuck on boot and 1pse | Xfinity Community Forum
@wizard2301. Hi there! I'd be glad to ensure that this gets looked into further. Please click on my handle (ComcastRob) and send a private message with your name, the complete service address (including city, state, ZIP, suite number, etc), and the phone or account number, and any pertinent details-- like the ticket number(s)-- so we can help.
Does X1 have the same channels?
Your internet and X1 box uses the same “channels” to operate. It’s probably the box since you stated your Internet is working fine
Can you use Xfinity Stream on Roku?
It’s not unheard of to have multiple bad boxes, so much for QA. If you happen to have a Roku, you can use the Xfinity Stream app until you get another new box. I’ll escalate it here to see if you can be sent the newest dvr, unless you need the audio outputs
