Re-amp Re-amping is a process often used in multitrack recording in which a recorded signal is routed back out of the editing environment and run through external processing or reverb chamber.
Full Answer
What is Rere-amping?
Re-amping is a process often used in multitrack recording in which a recorded signal is routed back out of the editing environment and run through external processing using effects units and then into a guitar amplifier and a guitar speaker cabinet or a reverb chamber.
What is a re-amp box?
A re-amp box converts a low impedance, balanced line level signal to high impedance, unbalanced instrument level signal. The goal of the re-amp box is to make the amplifier react in exactly the same way a live guitar would, but with a pre-recorded audio source.
Is the word Reamp trademarked?
The Reamp Company acknowledges that words such as "reamping" have become generic/colloquial audio expressions, but asserts that the word Reamp remains their legally registered trademark.
What is an example of re-amping?
Examples of common re-amping objectives include taking a pre-recorded electric guitar track and adding musically pleasing amplifier distortion/overdrive, room tone such as reverb, audio compression, EQ/filters, envelope followers, resonance, and gating.
What is guitar re amping?
As the name suggests, reamping is the act of capturing a both a clean D.I and your amped sound simultaneously, therefore enabling you to play it back through any guitar amp at a later date and re-recording that tone.
What does a re amp box do?
A reamp box is a specially designed device that allows you to send a clean guitar signal from your DAW to an amplifier, letting you tweak tones on the fly using a pre-recorded signal.
Do you need a DI to reamp?
DI boxes are crucial to have whether you are recording straight through or reamping, whereas reamp boxes are only needed specifically for the reamping technique.
How do you reamp an interface?
0:022:30How to reamp with AXE I/O audio interface - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirectly using AmpliTube to process the direct signal or just recording clean then route that diMoreDirectly using AmpliTube to process the direct signal or just recording clean then route that di track out for re amplification. After the fact.
How do you reamp audio?
12:3615:35How To Reamp - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the second cable coming out of the chain. And plug that into your amp. This time change theMoreTake the second cable coming out of the chain. And plug that into your amp. This time change the tone a little bit to give it a little bit of a different character.
How do I record DI and amp at the same time?
Plug the guitar into the DI100 input, then the output (mic level XLR) into one channel of the 2i2, then use the "link" output of the DI100 into the amp. The amp mic goes into the other 2i2 channel. Therefore recording the same signal twice: DI'd on one channel, amp mic on the other.
Is a direct box the same as a reamp box?
A DI box converts a high impedance, unbalanced instrument level signal to a low impedance, balanced mic level signal. A reamp box converts a low impedance, balanced line level signal to high impedance, unbalanced instrument level signal.
Can I use a DI to reamp?
By simply placing a DI Box between your guitar and your pedals or amp, you can preserve an unaffected guitar performance that might end up saving you having to re-record the part over again. Reamping lets you: Not worry about recording a bad tone.
Can I use a DI box in reverse?
DI-REVERSE Many try using a DI-Box “backwards” in order to convert a balanced signal to unbalanced. The resulting mismatch generally leads to disappointing results. The PDIR (DI-Reverse) offers a clean and reliable solution whilst additionally isolating the two connected devices via transformer.
Can you use a DI box for Reamping?
You can reamp with a DI box. Any DI Box can be used to record a clean audio signal at the first reamp stage. However, for better results, passive DI boxes are a better option for reamping.
Can you reamp with a Scarlett 2i2?
If you have a Scarlett Solo, 2i2, 18i8 (1st and 2nd Gen) or an iTrack Solo you will need to disconnect your speakers while re-amping. If you are using a Scarlett Solo/iTrack Solo then you will need to disconnect your speakers and use an RCA to 1/4 inch jack cable in order to connect to the re-amp box.
How do you reamp a bass?
1:014:10How To Reamp Bass Guitar - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we are in the live room and so that bass signal then comes up on the patch panel here. And thenMoreAnd we are in the live room and so that bass signal then comes up on the patch panel here. And then go straight to this radial di box or xampp as its called and it changes the impedance of the signal.
What is a reactive attenuator?
A reactive load or reactive attenuator lowers or completely loads down an amp's output while maintaining the impedance curve, making the amp feel, sound, and respond similarly to when it's connected directly to a cabinet.
What is a guitar Di?
A DI box is primarily used to allow you to run a long cable from an instrument such as an electric guitar or bass guitar without adding noise or losing signal quality. High impedance signals tend to be much more prone to noise and keeping cable lengths under 8 meters (25 ft) is recommended.
What is the purpose of a re-amp box?
The goal of the re-amp box is to make the amplifier react in exactly the same way a live guitar would, but with a pre-recorded audio source. Without the re-amp box there will be an impedance mismatch and loss of tone.Hearing your guitar rig play itself can take some getting used to!
What is a re-amp box?
It is often said that a re-amp box is just passive DI box in reverse, which is untrue. A DI box converts a high impedance, unbalanced instrument level signal to a low impedance, balanced mic level signal. A re-amp box converts a low impedance, balanced line level signal to high impedance, unbalanced instrument level signal.
What is reamping in music?
Re-Amping is a technique used by recording and mixing engineers to process recorded audio with analog hardware specifically guitar equipment.
Can you record an amplifier with one microphone?
Record the amplifier as normal with one or more microphones.
How Do You Reamp?from audient.com
If you don’t have an amp to record with or you’re not wanting to record with your own amp, then all you’ll need to do is plug into your interface and record a clean D.I track.
What is a little labs redeye 3D?from musicproductionnerds.com
Little Labs Redeye 3D is a very capable reamp DI box with vintage transformers. But don’t get discouraged. Despite the transformers being vintage, this DI box gives you almost unprecedented clarity of sound. To extend its usability, it offers you direct monitoring and phantom-powered buffered inputs.
What is reamping on guitar?from audient.com
As the name suggests, reamping is the act of capturing a both a clean D.I and your amped sound simultaneously, therefore enabling you to play it back through any guitar amp at a later date and re-recording that tone.
How many channels does a Radial JX44 V2 have?from musicproductionnerds.com
Radial JX44 V2 is a very powerful rackmount reamp and splitter with 4 separate input and output channels. And if that’s not enough, it lets you combine any input channel with any output channel. And since it has a separate DI output, the possibilities are truly limitless.
What is a dual RDB?from musicproductionnerds.com
ART Dual RDB is a reamping DI box that offers you 2 separate channels with XLR and 1/4″ TRS inputs and output with a full frequency range of 20 Hz – 20 kHz. To prevent any unwanted distortions, there are two ground loop isolating transformers.
What is Radial EXTC SA?from musicproductionnerds.com
The Radial EXTC-SA is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording.
Why do you need to reamp your amp?from audient.com
Re-amping means you’re able to get the performance down and worry about tone later.
How Do You Reamp?
If you don’t have an amp to record with or you’re not wanting to record with your own amp, then all you’ll need to do is plug into your interface and record a clean D.I track.
What is reamping in Sono?
Reamping provides you with complete creative control when it comes to getting your tone right and with Sono you can focus on getting your ideas down and have the flexibility to reamp at a later date.
What is Sono mic?
Featuring two Audient console mic pres, Two notes power and and cab emulation, on board 12AX7 valve preamp and a re-amp output, Sono is the perfect audio interface for guitarist and engineers alike. Whether you’re looking to record your guitar, just practise or even play live then Sono is the audio interface for you.
Why do you need to reamp a recording?
Re-amping means you’re able to get the performance down and worry about tone later.
Why do you need to reamp your amp?
Re-amping means you’re able to get the performance down and worry about tone later.
Why use a re-amp box?
It is important to use a re-amp box because amps operate on a different impedance to what your audio interface is sending.
Why is the D.I box placed first in the signal chain?
The D.I box is placed first in the signal chain because you need to ensure you capture a completely clean (free from fx or distortion) guitar signal, which you’ll then be able to send into an amp. Reamping. So now you’ve recorded your clean D.I you’re ready to start reamping.
What is re-capping?
"Re-capping" is a shot-gun approach to restoration often done by people with little or no knowledge of what they are doing. If a vintage item has some issues, they should be isolated and repaired before any thought of wholesale capacitor replacement is considered. Then test the item to determine what, if any, improvements could be made and whether capacitor replacement would contribute to that.#N#Considering how many capacitors there are in typical integrated amplifiers, preamplifiers, and receivers, they have proved to be phenomenally reliable for many decades. New capacitors may not last even a fraction of the life of the original ones- people don't consider that.#N#Capacitors were chosen for various attributes by the designers/engineers, and Joe the Cap Jockey with his bag of random capacitors is likely to degrade the performance of most anything he touches.#N#Lastly, just because electrolytic capacitors have a form of "wet" electrolyte, people think of them like car batteries. They might need replacing because they "dry out". Yes, they can and do. Some leak and make a real mess, but resistors (both fusible and normal) change value, transistors get noisy as do zeners and other devices. Capacitors are just but one class of components, but seem to get all the attention because:#N#a) they are easy enough to replace for a weekend warrior#N#b) anybody can read the value on the sleeve#N#c) they don't cost much to replace#N#d) people like to attribute huge positive changes after spending $50 and a weekend burning their fingers and "fixing" an already working amplifier/receiver etc.#N#e) it makes them feel like they have done something useful, when in fact they may have ruined the item, made it less valuable and a poorer performer.#N#So the legend lives on, and you will hear cries from the peanut gallery saying "it'll sound better after a recap" or "you really need to recap it to get the best sound" or "huge changes to the soundstage and detail retrieval after a recap"...#N#Try to resist and get the item professionally tested first and any niggling issues looked at. Some may be capacitor related, many may not.
What is the best capacitor for hot zones?
My advice is to get a 105 degree Celcius capacitor for the hot zones that showed signs of heat. They are probably a 85 degree Celcius rating that is installed because that's the way it's usually done in consumer domestic electronics. It doesn't hurt to up-rate a Celcius value on the temperature rating.
How to tell if an electrolytic cap is good?
Mainly with regard to high voltage applications (as power supplies): measuring ESR (equivalent series resistance) is the best way to tell the actual quality of an electrolytic cap, it may not (yet) be bulged, its capacitance may (still) measure correct - but when ESR is too high, it's time to recap. There are lists of the appropriate ESR values, and, of course, the cap has to be desoldered in order to measure it, and you need an ESR meter: there are very expensive ones and there is a very cheap one, which might not be absolutely accurate but which also does the job:
Why are capacitors chosen?
Capacitors were chosen for various attributes by the designers/engineers, and Joe the Cap Jockey with his bag of random capacitors is likely to degrade the performance of most anything he touches. Lastly, just because electrolytic capacitors have a form of "wet" electrolyte, people think of them like car batteries.
How long do capacitors last?
Considering how many capacitors there are in typical integrated amplifiers, preamplifiers, and receivers, they have proved to be phenomenally reliable for many decades. New capacitors may not last even a fraction of the life of the original ones- people don't consider that.
Why is it so difficult to measure ESR?
Measuring ESR of low value electros , though, remains difficult because reactance may be higher than ESR.
What does the peanut gallery say after a recap?
So the legend lives on, and you will hear cries from the peanut gallery saying "it'll sound better after a recap" or "you really need to recap it to get the best sound" or "huge changes to the soundstage and detail retrieval after a recap"...
What Is an Amp Hour?
Technically, an amp hour is simply a measure of how long a battery can provide one amp of power per hour. You will see it abbreviated as Ah or mAh for milli-amp hours in small applications. Unfortunately, most of the devices we rely on do not draw exactly one amp of power per hour, so an amp hour is not a particularly useful rating in this form. Instead, we have to consider what the amp hour rating means in relation to other factors about our device.
How to use amp hour rating?
The most useful way to use amp hour ratings is usually when comparing two different batteries side by side. In this way, you can easily see that the battery with the higher amp hour rating will need fewer recharging stops if all other factors are equal.
How long does a 10 AH battery last?
For instance, a battery with a 10 Ah rating will last twice as long as a battery with a 5 Ah rating when used under similar conditions, but it does not mean that it will actually last 10 full hours.
Do batteries tell you what amp hour rating?
You can find batteries with a wide range of voltage and Amp hour ratings to suit different applications, so the voltage of a battery does not necessarily tell you what the amp hour rating could or should be, and vice versa.
Does a battery lose capacity as it ages?
However, you will also need to keep in mind that as a battery ages it does start to lose some of its capacity, which may affect you long term. Generally, when a battery starts dying faster and faster with each recharge, you know it is time for a replacement.
