Why do we split faces?
What is split face masonry?
How is natural stone made?
What equipment is used to make stone?
Why do we split faces?
Split face is a broad term used in the building materials industry for any material that has been broken or split to expose a rougher surface. In the case of stone, the split face is desirable as it provides natural texture and stratification that is hard to duplicate outside of nature.
What is split face masonry?
In the block industry, split face refers to a concrete block that has been split to expose a rough face. This rough face very loosely imitated stone masonry and was a popular building option for large commercial applications during the building boom of the 1990s and 2000s. The big benefit of split face masonry blocks is that they are cheap and quick and easy to install, and allowed builders to erect both the structural part of the wall and primary finish in one step. Split face masonry has fallen out of favor with some architects and builders as the product became so widely used projects started to lose their originality and other issues, like moisture seepage through the block, started cropping up as well.
What does "split face" mean in Star Trek?
Split Faced! Dogs with “split faces” seem to get along with each other better than Bele and Lokai did from the planet Ariannus in the classic TV series, Star Trek, but “split face” is the term used for when half of a dog’s face is one color, and the other half is some other color, usually white.
Why do dogs have a split face?
In merles, a split face is believed to be a variation of pigment distribution , and it’s sometimes seen in solids with blazes. No known breeding tests have been performed to date to determine the heritability or lack of heritability of this trait.
What is Jandris split face block?
Jandris Split Face Blocks are fractured using a splitter exposing natural aggregates and creating a natural “rock-like” surface. They can be used for maintenance free interior and/or exterior applications.
What is custom shape?
Custom Shapes – Any feasible size and shape upon request.
What is the difference between split face block and concrete block?
Our licensed mason contractors get asked about the differences between Split-Face Block and Concrete Block all the time. In truth, there is no material difference between the two (and we mean that literally). Only the surface texture differentiates the two types of blocks.
What is a CMU?
Sometimes architects refer to a Concrete Block as "CMU," which stands for Concrete Masonry Unit. Old timers refer to this product as Cinder Block because of the use of cinders as an ingredient in its composition. Builders and developers warmly embrace the ...
Why use concrete blocks?
Builders and developers warmly embrace the use of concrete block because it permits a greatly accelerated rate of building, thereby reducing the cost of construction. (Depending on its depth, a single concrete block can be used in lieu of 18 bricks.)
What is split face block?
Split-Face Blocks have a rough texture, which makes for a more aesthetically pleasing look on large exterior walls (like what you find on the side and rear walls of many 3-flats and 6-flats built in the Chicagoland area over the last 20 years).
Is labor savings a good thing?
All of this time and labor savings sounds like a good thing, right? After all, less time spent constructing a building means less expense incurred by the builder and, in theory, a lower purchase price for the buyer. However, we have found that buildings constructed with concrete blocks seem to have more water infiltration issues and require more regular maintenance than buildings constructed entirely out of brick.
How to measure the power usage of appliances?
To measure the power usage and detect the electrical signatures of all appliances in the house, we need to sense both the voltage and the current of both live wires. The natural way to access both wires for voltage measurement is to connect to a 240V breaker -- even though Sense’s power needs are minimal, a 120V circuit breaker just wouldn’t give us all the information we need to detect every appliance. To measure the current on each line independently, we use two different current sensors, each of which senses the current flowing through its attached wire.
What is 120V in a DC circuit?
Technically, the magnitude is 170V. 120V is a type of average called RMS, which is commonly used to describe AC power. Nerd talk: RMS voltage is the voltage a DC circuit would need to have to cause a resistive load, like an incandescent light bulb or heating element, to use the same wattage as in the AC circuit.
How many live wires are there in a house?
North American homes are not wired up with a single live wire, but two . The difference between them is that when one is pushing, the other is pulling, and vice-versa. The “normal” appliances and outlets in a house are divided amongst the two live wires, and all are connected to neutral. Because the voltage difference between a single live wire and neutral is alternating with a magnitude of 120V 3, appliances that run on 120V power can be connected to the neutral wire and either of the two live wires.
What is the difference between a live wire and a neutral wire?
In an alternating-current system, typical household appliances are connected to a “live” wire, which has an alternating voltage and a “neutral” wire, which neither pushes nor pulls electrons. Neutral is necessary, though, to complete the path that electrons take. I’m tempted to refer to this as something like a sink drain, but I may have pushed (or pulled) the metaphor too far!
What does sense do?
Sense detects voltage and current from both live wires in order to give you the most accurate picture of energy usage in your home
Why do transformers have high voltage?
This is because transformers allow AC to be easily raised to a very high voltage for long-distance transmission, and then lowered back down for use . 2 Voltage is like water pressure; it measures “how hard” the electrons are pushing.
How does sense use split phase power?
How Sense uses split-phase power as an additional clue to help distinguish devices. The world’s power distribution systems use alternating current, or AC, in which the electrical current alternates direction many times a second. This is because transformers allow AC to be easily raised to a very high voltage for long-distance transmission, ...
How many cards can you split in a blackjack game?
A player can split in a round of Blackjack if their opening two cards are of the same value. This means any pair from Ace through to nine and any two cards valued at 10 (for instance, a 10 and a Queen).
How rare is it to split in blackjack?
In a game of Blackjack, opportunities to split will likely be rare. You have an approximate 0.5% chance of getting any pair from Aces to nines in your opening two cards, and a 9.4% probability of getting two cards valued at 10.
What is Pinnacle Sports Casino?
Pinnacle Sports Casino has a wide range of Blackjack games for you to enjoy , including Live Blackjack, Classic Blackjack, Vegas Strip Blackjack and many more!
What is splitting in blackjack?
Splitting is an interesting component of playing Blackjack that allows you to enter two hands in the same round if the first two cards in your initial hand are of the same value. So what is splitting, when can you do it and when should you?
What happens if the dealer's face up card is a 7?
If the dealer’s face up card is a seven, the most likely outcome is that their second card will be worth 10, meaning they will be forced to finish the round with a hand worth 17, less than your hand’s value of 18. If the face up card is worth 10 or an Ace then they have a chance to get Blackjack, meaning standing on a value ...
What happens if you split a card?
If a player decides to split, they must place a second bet for that round of the same value as their original bet, essentially doubling their stake. The two cards are then treated as the first card of two new independent hands that are played out separately. Should one of these hands become a pair, the player is allowed to split again ...
How many decks are in a blackjack table?
NB: This table assumes four to eight decks in play and that the dealer hits on a soft 17.
Why do we split faces?
Split face is a broad term used in the building materials industry for any material that has been broken or split to expose a rougher surface. In the case of stone, the split face is desirable as it provides natural texture and stratification that is hard to duplicate outside of nature.
What is split face masonry?
In the block industry, split face refers to a concrete block that has been split to expose a rough face. This rough face very loosely imitated stone masonry and was a popular building option for large commercial applications during the building boom of the 1990s and 2000s. The big benefit of split face masonry blocks is that they are cheap and quick and easy to install, and allowed builders to erect both the structural part of the wall and primary finish in one step. Split face masonry has fallen out of favor with some architects and builders as the product became so widely used projects started to lose their originality and other issues, like moisture seepage through the block, started cropping up as well.
How is natural stone made?
Primary and secondary cuts are most often made using band style diamond wire saws. Mechanical processing for the finish side of the stone will include the use of hydraulic splitters designed to break the stone along its natural cleavage lines, which creates the split face stone look that we are discussing today. Large mechanical polishers, grinders, tumblers, specialty saws, and even bush-hammer machines are examples of other equipment stone manufactures can use to create different finishes on the faces of stone as well. Above is an example of how the same raw stone can be manufactured into both a split face and sculptured finish, creating two completely different and unique looks and products.
What equipment is used to make stone?
Large mechanical polishers, grinders, tumblers, specialty saws, and even bush-hammer machines are examples of other equipment stone manufactures can use to create different finishes on the faces of stone as well.
